본 연구는 비육돈 사료내 구리와 아연의 수준별 급여가 생산성, 영양소 소화율, 육질 및 도체 특성에 미치는 영향을 알아보기 위해 실시하였다. 3원 교잡종$(Landrace{\times}Yorkshire{\times}Duroc)$ 비육돈 72두를 공시하였으며, 시험개시 시의 체중은 58.47 kg이었다. 시험설계는 $2{\times}3$ 요인설계(Cu $level{\times}Zn$ level)에 의해 6개 처리로 하여 처리당 3반복, 반복당 4두씩 완전임의 배치하였다. 본 연구에 사용된 구리와 아연의 공급원은 각각 Cu-methionine chelate와 Zn-methionine chelate 이었으며, 사료내 함량은 각각 10, 30 및 60 ppm과 80 및 120 ppm 이었다. 전체사양시험기간 동안 ADG와 ADFI에서는 구리 함량, 아연 함량 및 상호작용에 대한 유의한 효과가 나타나지 않았다. 사료효율에서는 유의한 상호작용이 나타났는데(p<0.05), 구리와 아연함량이 각각 30과 120 ppm일때 가장 높게 나타났다. 건물 소화율에서는 구리 함량(p<0.02), 아연 함량(p<0.01) 및 상호작용(p<0.04)에 대한 유의한 효과가 나타났는데, 구리함량이 감소할수록 증가하였고, 아연 함량은 증가할수록 증가하였으며, 구리와 아연 함량이 각각 30과 120 ppm일 때 가장 높게 나타났다. 질소 소화율에서는 아연 함량(p<0.01)과 상호작용(p<0.03)에서 유의한 효과가 나타났는데, 아연 함량이 증가할수록 증가하였고 구리와 아연 함량이 각각 30과 120 ppm일때 가장 높게 나타났다. 명도를 나타내는 $L^*-$값, 전단력, 가열감량 및 pH에서는 유의한 효과가 나타나지 않았다. 적색도를 나타내는 $a^*-$값 (p<0.04)과 황색도를 나타내는 $b^*-$값 (p<0.01)에서는 아연함량에 대한 효과가 나타났는데, 사료내 아연 함량이 감소할수록 증가하였다. 보수력에서는 유의한 상호작용이 나타났는데(p<0.01), 구리와 아연 함량이 각각 10과 120 ppm일 때 가장 높게 나타났다. 도체중, 등지방 두께, 도체등급에서는 유의한 효과가 나타나지 않았다. 도체율에서는 유의한 상호작용이 나타났는데(p<0.04), 구리와 아연 함량이 각각 30과 120 ppm일때 가장 높게 나타났다. 결론적으로 비육돈 사료내 구리와 아연의 함량이 각각 30 ppm과 120 ppm일때 사료효율, 영양소 소화율 및 도체율을 개선시켰으면 각가 10 ppm과 120 ppm일때 보수력을 개선시켰다.
유비쿼터스 컴퓨팅 환경을 구현하기 위해서 가장 핵심이 되는 기술은 USN(Ubiquitous Sensor Network)기술로써 RFID(Radio Frequency Identification)와 무선 센서 네트워크(Wireless Sensor Network WSN)를 이용한 다양한 센서 기술과 프로세서 집적 기술 그리고 무선 네트워크 기술을 이용해서 실제 물리적 환경 정보를 원격에서 손쉽게 수집하고 모니터링 하는 것을 가능하게 함으로써 기존 가상 공간의 IT 기술을 다양한 실제 환경에서 확대할 수 있도록 한다. 그러나 RFID와 WSN은 이러한 기술적 유사성과 상호 영향에도 불구하고 별 개의 연구로 인식되었으며 RFID와 WSN의 기술적인 융합에 대한 연구는 미비한 수준이다. 이러한 문제점을 인식한 EPCglobal에서는 국제 표준인 EPCglobal Network를 기반으로 RFID와 WSN 기술을 효율적으로 통합/연동할 수 있는 EPC 센서 네트워크(EPC Sensor Network)를 제안하였다. 제안된 EPC 센서 네트워크는 미들웨어에서 복합 이벤트 처리(Complex Event Processing) 기법을 이용하여 RFID와 WSN을 통해 발생되는 데이터를 단일 환경에서 통합하고, 발생된 이벤트를 EPCglobal Network를 기반으로 연동하는 기술이다. 하지만 이러한 EPC 센서 네트워크는 미들웨어에서 복합 이벤트를 검출하기 위해 복합 이벤트를 구성하는 모든 기본 이벤트가 발생하지 못하는 경우에도 계속적인 검사를 수행하기 때문에 연산 비용이 증가되는 문제점이 있다. 또한 센서 데이터의 표현을 위해 RFID 태그의 EPC를 기반으로 센서 데이터를 하나의 결합된 쌍으로 표현한다. 이것은 센서 데이터를 처리하는데 있어 반드시 EPC가 있어야 함을 의미한다. 즉, 센서 데이터만을 위한 관리 기능은 제공하지 못하는 문제점이 있다. 이러한 EPC 센서 네트워크의 문제점들을 해결하기 위하여 본 논문에서는 RFID/WSN 통합 관리 시스템을 제안한다. 제안하는 RFID/WSN 통합 관리 시스템은 첫 번째, RFID와 WSN 데이터를 인터넷 표준 프로토콜인 SIP(Session Initiation Protocol) 기반의 통합 관리 시스템을 제안하였다. 두 번째, 미들웨어에서 불필요한 복합 이벤트 검출 연산을 위하여 복합 이벤트의 최소 조건을 정의하고 조건을 만족하는 경우에만 복합 이벤트를 검출하는 알고리즘을 제안하였다. 제안하는 기법들의 성능을 평가하기 위하여 SIP 기반의 통합관리시스템을 구현하여 성능을 평가하였다.
Objectives: This study was conducted to investigate the actual condition of the farm work environment and personal protective equipment as part of the effort to improve livestock work for the safety and health of poultry farmers and provide basic data for establishing plans to improve and develop personal protective equipment. Methods: For this purpose, a questionnaire survey on general information about stables, the poultry work environment, accidents, the wearing of work clothes and personal protective equipment, and the level of awareness related to personal protective equipment was conducted among 148 poultry farmers. Results: As a result, it was found that poultry workplace environment was exposed to such risks as fine dusts; organic dusts; poisonous gases; odorous substances; chicken excrement; contact with chickens, bacteria or viruses; and accidents related to machine operation. Thirteen percent of respondents suffered severe respiratory diseases, and the most frequently injured sites due to accidents were the hands (25.7%), knees (23.8%), arms (17.3%), and head (10.9%). The most frequent type of accident was collisions between the body and obstacles or machinery during movement (36.4%), followed by erroneous machine operation such as feeders and electric shocks (8.5%). Regarding the wearing of work clothes and personal protective equipment, 51.7% of the respondents wore worn-out clothing or everyday clothes, whereas only 32.0% wore work clothes. The percentage of farmers who wore proper protective equipment for the work environment during poultry work was 48.4%. The most frequently used type of protective equipment was boots (38.9%), followed by mask (36.7%), gloves (36.3%), appropriate work clothes (22.6%), quarantine clothes (17.6%), helmets (13.4%), and goggles (12.6%). The rate of wearing goggles was low because they were considered inconvenient and lowered work efficiency. Furthermore, they purchased everyday products available on the market for their personal protective equipment which were not appropriate for maintaining safety in an actual harmful environment and its consequent risks. As a result of the survey of the awareness level related to personal protective equipment, their levels of awareness of accidents and attitude proved to be average or higher, but the practice of wearing protective equipment and the level of knowledge and management of personal protective equipment were lower. Conclusion: This survey found that the wearing status of personal protective equipment among poultry farmers was insufficient even though they were exposed to risks. Most respondents were aware of the necessity of wearing personal protective equipment and of the potential for accidents, but they did not wear proper protective equipment. Their wearing rate was low due to a lack of knowledge about protective equipment, as well as the inconvenience of wearing it. Therefore there is a need to improve and develop specialized personal protective equipment for respiration, hands, and eyes, as well as work clothes that can protect farmers from major harmful matter that is generated in the poultry workplace. Based on the results of this investigation, we will conduct further studies on the required performance and design directions of personal protective equipment while collecting more objective data through field-oriented assessments.
In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.
목적: 최근 임플란트 고정성 보철물 제작 시 나사 유지형 보철물의 교합적, 심미적 단점을 해결하고, 시멘트 유지형 보철물에서 착탈 용이성을 확보하기 위하여 보철물 설측에 슬롯을 형성하는 방법이 소개되었다. 이 연구의 목적은 설측 슬롯을 부여한 시멘트 유지형 임플란트 보철물 제작 시에 내면 간격이 보철의 제거에 어떤 영향을 미치는지 알아보는 것이다. 재료 및 방법: 티타늄 지대주와 상부에 합착할 지르코니아 보철물 내면 간격을 30, 35, $50{\mu}m$의 3종류로 설정하여 종류별로 3개씩 총 15개를 제작하였다. 지르코니아 보철물은 티타늄 지대주의 선반 부위와 만나는 위치에서 1 mm의 공간이 생기도록 하여 탈착을 위한 슬롯(retrievable cement-type slot, RCS)을 형성하였다. 지대주와 지르코니아 보철물의 합착에는 자가 중합 레진 시멘트를 이용하였고, 합착 된 시편을 맞춤 제작된 장비를 이용하여 최대 제거 응력 값을 Ncm단위로 측정하였다. 통계적 분석으로 세 그룹을 비교하기 위해 Kruskal-Wallis 검정을 시행하였고 (${\alpha}=.05$), 사후검정으로 수정된 Mann-Whitney U-test와 Bonferroni correction 방법을 이용하여 차이를 보았다 (${\alpha}=.017$). 결과: 내면 간격이 $30{\mu}m$ 군과 $35{\mu}m$ 군간의 비교에 있어서 제거 응력에 통계학적으로 유의한 차이가 없었고 (P = .032), $30{\mu}m$군과 $50{\mu}m$군, $35{\mu}m$군과 $50{\mu}m$군간을 비교 할 때 유의한 차이가 나타났다 (P < .017). 결론: 그러므로 내면 간격은 지르코니아 보철물과 티타늄 지대주 사이의 유지력에 영향을 미쳤다.
An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.
차량기술사들은 자동차산업의 현장에서 신제품기획, 마케팅, 연구개발, 제조 및 관리 등의 전문적인 업무를 수행한다. 이들의 전문 기술역량은 기업과 조직의 경쟁력을 증진시키는 원동력이다. 이 연구는 차량기술사들의 전문적 업무역량 특성과 중요도를 규명하여 자동차 기술 분야의 자격검정과 공학교육을 효율적으로 연계할 수 있는 기초자료를 제공하는 데 목적이 있다. 세부 연구문제는 첫째, 전문가(차량기술사, 자동차 관련 전공 대학교수, 자동차 전문가)들은 추론된 차량기술사의 전문적 업무역량별 중요도를 어떻게 인식하고 있는가? 둘째, 차량기술사의 업무역량에 관한 중요도 인식에 있어서 응답자의 소속집단(차량기술사, 자동차공학 전공 대학교수, 자동차 전문가)간에 차이가 있는가? 이다. 연구자들은 현직에 근무하고 있는 차량기술사 등 자동차 신제품 개발관련 전문가 협의 및 개인면담을 통해 차량기술사의 전문적 업무역량을 추출한 다음, 차량기술사 108명, 자동차 및 기계공학전공 대학교수 49명, 기업체의 자동차 전문가 55명을 대상으로 설문지를 배포하여 총 152명(72%)으로부터 설문지를 회수하여 분석하였다. 차량기술사의 전문적 업무역량에 대한 설문지는 영역 및 항목별로 빈도 및 변량분석을 실시하였다. 연구결과는 제동장치설계, 프로젝트진행리더십, 미래예측과 변화관리, 디젤엔진설계, 환경대책, 제품기획과 안전에 대한 기술이 가장 중요한 것으로 나타났고, 인사총무와 재무회계, 노무관리 등에 대해서는 중요도를 낮게 인식하고 있었다. 또한 업무영역평균의 집단별 중요도는 섀시설계영역, 엔진 변속기설계영역, 제품기획 마케팅영역, 자재 물류 품질관리영역, 디자인 차체 의장설계영역, 판매 정비 및 경영지원영역, 소재 및 엔진제조영역, 프레스 및 조립공장 제조 영역 순으로 나타냈다. 자동차개발업무관련 차량기술사의 전문적 업무역량중 고객편익과 안전관련 신기술 응용력, 경쟁력 있는 신제품개발 능력의 중요도가 높았다. 응답집단별로는 교수집단이 타집단 보다 모든 항목에서 중요도 평가 평균값이 높았고, 다음은 차량기술사, 차량전문가 순으로 나타났다.
송이버섯의 최적 추출조건 예측을 위해 추출온도(60, 70, 80, 90, $100^{\circ}C$), 추출시간(1, 2, 3, 4, 5 hr) 및 시료에 대한 용매비(10, 20, 30, 40, 50 mL/g)를 독립변수로 하여 중심합성계획에 따라 16구간의 열수추출조건을 설정하였다. 각 추출물에 대한 이화학적 특성으로 가용성 고형분 함량, 총 페놀성 화합물 함량, 전자공여능, 아질산염 소거능 및 환원당함량을 조사하였다. 각 특성에 대하여 SAS program을 이용하여 회귀분석 후 최적 추출조건의 예측과 반응표면에 의한 추출특성을 모니터링하였다. 가용성 고형분 함량, 전자공여능 및 아질산염 소거능은 시료에 대한 용매비에 영향을 많이 받고 있는 것으로 나타났으며, 총 페놀성 화합물 및 환원당함량은 추출온도 및 시료에 대한 용매비의 영향을 모두 많이 받고 있는 것으로 나타났다. 송이버섯의 효율적인 추출을 위하여 열수에서 추출특성을 분석한 결과 가용성 고형분 함량의 최적 추출조건은 추출온도 $83.48^{\circ}C$, 추출시간 3.44 hr 및 시료에 대한 용매비는 42.83 mL/g이었으며, 총 페놀성 화합물 함량에 대한 최적추출조건은 추출온도 $78.85^{\circ}C$, 추출시간 3.33 hr 및 시료에 대한 용매비는 34.84 mL/g이었다. 전자공여능에 대한 최적조건은 추출온도 $91.00^{\circ}C$, 추출시간 1.62 hr 및 시료에 대한 용매비는 39.42 mL/g 등으로 각각 나타났다. 각 변수에 대한 회귀식을 도출하여 송이버섯의 이 화학적 특성에 대한 최적추출조건을 중첩(superimposing) 한 결과 추출조건의 범위는 추출온도 $70{\sim}90^{\circ}C$, 추출시간 2~4 hr, 시료에 대한 용매비 30~50 mL/g으로 각각 예측되었다.
본 연구의 목적은 반응표면분석법을 통해 최적화한 뽕잎과 오디 혼합비율을 기본 녹두죽에 첨가하여 고혈압 개선에 도움을 줄 수 있는 기능성 죽을 개발하는 것이다. 뽕잎분말과 오디분말을 독립변수로 하였고, 칼륨, 나트륨, GABA, C3G, rutin 및 flavonoid를 종속변수로 하여 뽕잎분말과 오디분말의 최적 혼합비율을 모니터링 하고자 하였다. 반응표면분석법을 이용하여 산출된 뽕잎분말과 오디분말의 최적 혼합비율 함량은 뽕잎분말 함량 5.41 g, 오디분말 함량 2.65 g이었다. 이때 종속변수들의 최적 함량은 칼륨 함량이 1,844.22 mg/100 g, 나트륨 함량이 52.74 mg/100 g, GABA 함량은 139.98 mg/100 g, C3G 함량은 1,134.89 mg/100 g, rutin 함량은 101.56 mg/100 g 및 flavonoid 함량은 201.28 mg/100 g으로 나타났다. 최적 혼합비율의 뽕잎분말(5.41 g)과 오디분말(2.65 g)을 첨가한 기능성 죽을 제조하여 일반 성분과 무기질 함량 분석을 한 결과 수분 함량은 88.54 g, 탄수화물 함량은 8.77 g, 단백질 함량은 2.24 g, 지방 함량은 0.04 g, 조회분 함량은 0.41 g으로, 최적 혼합비율의 뽕잎분말과 오디분말을 첨가한 녹두죽의 탄수화물, 단백질, 지방, 조회분 및 무기질 함량이 뽕잎과 오디의 혼합분말이 첨가되지 않은 기본 녹두죽보다 모두 높았다. 결론적으로 최적 혼합비율의 뽕잎분말과 오디분말이 첨가된 기능성 죽은 고혈압 개선에 도움을 줄 수 있는 칼륨, 나트륨, GABA, C3G, rutin 및 flavonoid와 같은 기능성 성분이 우수하여 고혈압 환자의 혈압개선에 도움을 줄 수 있을 것이다.
It is widely recognized that manipulation of body position takes advantage of the influences of gravity for improving oxygenation. The study aims to determine the effects of positioning(supine, prone, right lateral decubitus and left lateral decubitus positions) applied to the mechanically ventilatory acute respiratory failure patients on arterial oxygen partial pressure($PaO_2$), alveolar arterial oxygen tension difference($AaDO_2$), mean aterial pressure, peak inspiratory pressure and plateau pressure. Thirty two acute respiratory failure patients admitted to the medical intensive care unit at Kangnam St. Mary's Hospital, The Catholic University of Korea from March 1997 to January 1998, were divided into three groups by radiographic evidence of unilateral or bilateral lung disease. In group 1 with dominant right lung disease were twelve subjects, group 2 with dominant left lung disease had eight subjects and group 3 had twelve subjects with bilateral lung disease. The variables were measured in 30 minutes after each position of supine, prone, good lung down lateral decubitus and sick lung down lateral decubitus position. The position order was done at random by Latin squre design. The results are as follows; 1) With group 1 patients, the $PaO_2$ in the left lateral decubitus and prone position were $126.8{\pm}30.8$ mmHg and $106.7{\pm}36.8$ mmHg, respectively(p=0.0001). 2) With group 2 patients, the $PaO_2$ in the prone and the right lateral decubitus position were $121.7{\pm}44.7$ mmHg and $118.5{\pm}31.7$ mmHg, respectively (p=0.0018). 3) With group 3 patients, the $PaO_2$ was $143.6{\pm}36.6$ mmHg in the prone position (p=0.0001). 4) With group 1 patients, the $AaDO_2$ in the left lateral decubitus and the right lateral decubitus position were $178.1{\pm}29.7$ mmHg and $233.1{\pm}24.4$ mmHg, respectively(p=0.0001). 5) With group 2 patients, the $AaDO_2$ in the prone and the left lateral decubitus postion were $184.0{\pm}39.5$ mmHg and $231.0{\pm}23.9$ mmHg, respectively(p=0.0019). 6) With group 3 patients, the $AaDO_2$ in the prone and the supine postion were $377.1{\pm}35.6$ mmHg and $435.7{\pm}13.1$ mmHg, respectively (p=0.0001). 7) There were no differences among the mean arterial pressure, peak inspiratory pressure and plateau pressure for each of the supine, prone, left lateral decubitus and right lateral decubitus position. The results suggest that oxygenation may improve in mechanically ventilatory patients with unilateral lung disease when the position is good lung dependent and prone, and patients with bilateral lung disease when the position is prone without any effects on the mean arterial pressure and airway pressure. It is suggested that body positions improve ventilation/perfusion matching and oxygenation need to be specified in patient care plans.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.