• Journal of Plant Biology
• /
• v.29 no.2
• /
• pp.135-143
• /
• 1986

The distributional pattern of the bast fibres strands or bundles in the stems of Sida species represented in Nigeria is studied. Three major patterns of arrangement are recognized, namely aggregation of fibre strands into units with wedge-shaped, or triangular, rectangular, rhomboidal, square and trapezoid outlines; serial arrangement of fibre strands into rings or circular, ovoid, semi-circular or crescentic rows; and intermediate pattern in which both fibre strands-aggregates and serial rows of strands patterns are combined. The first pattern is found in S. linifolia, S. urens and S. scabrida, the second in S. cordifolia, S. pilosa, S. ovata, S. rhombifolia and S. spinosa, and the third in S. garckeana, and S. acuta. A dichotomous key based on these features is presented. Dimensional characteristics of the bast fibre cells are also given.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.59-66
• /
• 1996

Polyimides containing cyclobutane ring in main chain is known to be thermally stable and able to be developed in organic solvents after photolysis with 254 nm UV light. This type of polyimides can be used as promising positive photoresist in VLSI fabrication process. In the current VLSI process, photoresist films are formed by spin coating. The film thickness is more than several hundred nano meters. It seems that there is room for improvement of film coating process by introducing Langmuir Blodgett technique. Thereby ultra thin film photoresist can be formed, and higher density of integration in VLSI be achieved. In the present work, depositing procedure of LB films of this polyimide was investigated. LB film thickness was measured by ellipsometry to evaluate deposited film status. Chemical imidization procedure was studied to avoid several problems in thermal imidization. The pattern of submicron dimension has successfully formed on LB film of 8nm thick, which found showing good contrast.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.129-137
• /
• 1996

In this paper, we simulated a radiation pattern directivity of microstrip patch antenna for 9[GHz] using the computer. It is analyzed and compared the directivity of field characteristics at two different aspects. One is that of 1-dimension and 2-dimension array, the other is that of a linear and planar array antenna. We tried the constants for the simulation of teflon substrate, dielectric constant ${\varepsilon}r=2.50$, ground plane conductor thickness t=0.03556, substrate height h=0.72188, dielectric loss degree $tan{\delta}$=0.00085, characteristics impedence of line $Zo=50({\Omega})$. The major advantage of microstrip patch antenna is that the arrangement of antenna is associated with the directivity and effectiveness. We have been studied the difference of the radiation pattern of antenna with wave variety through computer simulation.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.339-340
• /
• 2006

The pattern of drug resistance and incidence of R-factors were studied in Shigella sonnei as food-borne pathogen strains isolated from chicken meat in Iran. In this study we examined for transferring R-factors of S. sonnei to sensitive Escherichia coli $k_{12}{\bar{F}}(\lambda)$. The results showed that 19 out of 57 strains (33.3%) were resistant to one or more drugs and multiple drug resistance was more common than single drug resistance. The most predominant pattern of resistance observed was Tetracycline (Tc), Chloramphenicol (Cm), Streptomycin (Sm), and Sulfonamide (Su). 100% of the strains from the Caspian littoral transferred at least a part of their resistance pattern to sensitive E.coli $k_{12}{\bar{F}}(\lambda)$.

• Journal of Sensor Science and Technology
• /
• v.30 no.5
• /
• pp.273-278
• /
• 2021

Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1012-1019
• /
• 2021

Currently, since the black-white QR (Quick Response) codes have limited storage capacity, color QR codes have been actively being studied. By multiplexing 3 colors, the color QR codes can allow the code capacity to be increased by three times, however, the color multiplexing brings about the possibility of crosstalk and noises in the acquisition process of the final image, incurring the decrease of bit-recognition rate. In order to improve the bit recognition rate, while keeping the storage capacity high, this paper proposes a new type of color QR code which uses the pattern information as well as the color information, and then analyzes how to increase the bit recognition rate. For this aim, the paper presents an efficient system which extracts embedded information from color QR code and then, through practical experiments, it is shown that the proposed color QR codes improves the bit recognition rate and are useful for commercial applications, compared to the conventional color codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.210-212
• /
• 2022

In the manufacturing industry, various sensors are attached to monitor the status of production facility. In many cases, the data obtained through these sensors is time series data. In order to determine whether the status of the production facility is abnormal, the process of extracting patterns from time series data must be preceded. Also various methods for extracting patterns from time series data are studied. In this paper, we use matrix profile algorithm to extract patterns from the collected multivariate time series data. Through this, the pattern of multi sensor data currently being collected from the CNC machine is extracted.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.306-313
• /
• 2015

In this study, the change of optical characteristics was studied according to the micro optical pattern provided by photo lithography followed by thermal reflow process. The shape and luminance variation with micro pattern was evaluated by SEM and spectrometers. Also, we analyzed the luminance characteristics using the 3D-optical simulation (Optis works) program. As a result, we found that the radius of curvature(R) in micro pattern is decreased up to 77%($150^{\circ}C$) compared to the radius of curvature at the condition $100^{\circ}C$, which is caused by efficient reflow of organic material without chemical changes. The highest enhancement of brightness with optimum micro pattern was obtained at the condition of $120^{\circ}C$ reflow process. The brightness gain with optical micro patterns is more than 15% at the condition of R=16.95 um, ${\Theta}=77.14^{\circ}$ compared to original optical source. The results of light simulation with various radius of curvature and side angle of pattern shows the similar result of experiment evaluation of light behavior on optical micro patterns. It is regarded that the more effect on light enhancement was contributed by side angle which is effective factor on light reflection, rather than the curvature of micro-patterns.

• Journal of the korean veterinary medical association
• /
• v.15 no.8
• /
• pp.453-457
• /
• 1979

The hematological changes by electric acupuncture in dags has been studied, using 5 mongel dags, by determining the values af erythrocyte count, hemoglobin content, hematcrit ratio, mean corpuscular volume, mean corpuscular hemoglobin, mean corpuscular he

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.190-199
• /
• 2001

In this paper, we have researched the depth of focus (DOF) and cutoff intensity of the $0.1{\mu}m$rule dense line'||'&'||'space pattern according to the various off-axis illumination (OAl) conditions in the optical system of 0.65 NA using ArF excimer laser (193 nm). We have also studied the variation of the DOF and cutoff intensity according to the sub-resolution pattern (hammer head type) size for optical proximity correction (OPC) applied to the capacitor pattern and the various OAl conditions in the same optical system. As a result, it is revealed that the cross type quadrupole or annular illumination is preferred to the conventional X type quadrupole for printing the $0.1{\mu}m$ rule dense pattern. Also, we can investigate the optimal illumination condition and the size of ope sub-resolution pattern to keep a consistent DGF and cutoff intensity trends.