• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.399-403
• /
• 2004

대학에서 의류학과 교육은 그 목적에 따라 다양하나 의복구성은 의복제작과정을 이해하는데 필요한 것으로 의복디자인분야 부터 품질관리에 이르기까지 기본과목으로 되어있다. 의복제작은 인체의 이해에 따른 기본원형의 설계로 시작된다. 기본원형은 활용이 다양하여 모든 종목의 의복 패턴 제작이 가능해야 한다. 또한 각 인체 치수에 맞는 사이즈를 등급화하여 초보자라도 누구나 활용할 수 있는 기본원형을 설계하는 것이 필요하다. 따라서 본 연구는 20대 초반의 대학생을 대상으로 입체재단 방법에 의한 기본원형을 제작하여 등급별로 표준화된 치수를 산출하고 연구된 평면재단 방법에 의한 길의 기본원형을 비교 검정하여 적합성을 비교하였다. 석고법에 의하여 제작된 인체모형에서 드레이핑된 기본원형과 연구된 평면재단 방법에 의한 기본원형을 비교 검정한 결과 5단계로 치수를 등급화 하였다. 착장평가 결과 다양한 체형에 만족힌 결과를 얻어 의복구성을 시작하는 초보자들에게 활용하여 교육할 수 있으리라 기대한다.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.99-106
• /
• 2006

With the growing interest in pet dogs and pet dog's wear I used this study to compare and analyze the pattern used by each supplier and developed a new pattern for pet dogs' wear which is appropriate for pet dogs' body lines and movement. Test subjects were 91 pet dogs in Busan and after comparing 3 patterns from different suppliers, I developed the pattern reflecting pet dogs' body shapes and movement. Results are as follows; 1) As a result of analyzing measurements, it was found that pet dogs motion in walking on four feet, is different from that of people on two feet. For center measurements, their waist to bust length is longer than their waist to back length. The result of analysis shows that bust circumference impacts most other measurement results and it seems that better results are achieved if the bust line is taken into consideration when measuring bust back length, bust front length, neck base circumference, front leg arc, the length between lateral shoulder etc. 2) As a result of comparing suppliers' patterns, it was discovered that each supplier has different sizes for the same patterns and those sizes are not standardized across the board. Even if the same size of pattern was actually used in the production of pet dogs' wear by the individual companies, there were many variations in size for each item. 3) To develop a more standard pattern of pet dogs' wear, I collected and analyzed 3 patterns from each supplier and designed a new pattern, revising it three times. After test-wearing of the experimental pattern and the studied patterns, and comparing and analyzing the results, the studied pattern had similarly better estimation than the experimental one.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.262-267
• /
• 2003

At process of production according to development of accumulation degree of semi-conductor element, because functional mistake examination time required increases, is becoming big obstacle factor in cost-cutting. Studied pattern generator that generate pattern and address that is bundle enemy to process these controversial point effectively.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.127-144
• /
• 2016

Two dimensional numerical investigations were carried out to study the influence of interface thickness and their pattern on the behavior of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The linear elastic analysis was carried out on one and two bay structural systems as well as the influence of number of stories was studied by varying the number of stories as single, three and five. The cement mortar was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The interface was recognized as one sided, two sided, three sided and four sided and their effect was studied by removing the interface material between the reinforced concrete frame and masonry infill. The effect of lateral loads on infill masonry wall was also studied by varying assumed loads as 10, 20, 30, 40, 50 and 60 kN. The behavior of infilled frames studied has revealed that there is a maximum influence of interface thickness and interface pattern corresponding to 10 mm thickness. In general, the lateral displacement of frame is increased linearly with increase in lateral loads.

• 대한물리치료과학회지
• /
• 제6권2호
• /
• pp.1041-1062
• /
• 1999

This study is to stimulate the model of which top notch muscle stimuli physical therapy has been made on the basis of GCM. GCM has been studied on the hypermobility & hypomobility pattern on the part of spine & extremity, and the body characteristics of four body types, which is the tilting of seal scapular & ilium. The purpose of this study is to analysize the type of GCM which has been focused on the spine & extremity for the patients having dysfunctions of neuromuscular system, being analysized the movement. The result of this study is as following; 1) The First hypothesis: The hypermobility & hypomobility pattern assorted by the tilting of scapular & ilium, as does the former study analysize was claimed that it would be in line with the pattern for hypermobility hypomobility and physical characteristics according to each body type at the percentage of at least 60(p<.001). 2) The 2nd hypothesis : Stimuli therapy of muscle dealing with physical characteristics and joint hypermobility hypomobility has the important role in restoring the deformity and keeping anatomical postural plumb alignment also it would a highly effects on correcting the body even though the stimuli area was limited to four areas and it was lack of time compared with those applied by general physical therapy(p<.001). As above the result, the top-notch type for physical therapy based on hypermobility hypomobility pattern by 4 body types which has been studied on tilting of scapular & ilium is more specificed and specialized than those of general physical therapy technologies. So this study will be believed to dedicate to restoration ideal anatomical postural plumb alignment based on spinal Manipulation and the concept of whole person as well as to being simple and effective to apply.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.459-462
• /
• 1999

This paper presents a numerical study on the effect of live load pattern on RC flat plate under in-plane compression. Through the numerical study on various live load pattern, the load condition that governs the strength of the flat plate is determined. Effects of L.L/D.L. and arrangement of reinforcement on the behavior of the flat plate are also studied. And the efficient arrangement of reinforcement regarding to live load pattern is proposed.

• Journal of Oral Medicine and Pain
• /
• 제6권1호
• /
• pp.5-8
• /
• 1981

The author had sellected stone models of upper premolar teeth from 20 age to 60 ages in male, and studied the attrition pattern of upper premolar teeth having attention to teeth cups on the stone model. All of the attrition patterns were divided (into) 14 forms. The results were as follows : 1. Attrition patterns of upper premolar teeth were divided into 14 forms. 2. Being compared with age group, early attrition pattern (M) showed decreasing tendency and late attrition pattern (A) showed incresing tendency by aging.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.280-283
• /
• 2004

Micro-lens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LGP optical design, micro-lens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. During injection molding process, experimental study was conducted to improve replication quality and brightness of ${\sim}50um$ micro-lens pattern mold. The effect of mold temperature for the replication quality of micro-lens array was studied.

• 한방비만학회지
• /
• 제11권1호
• /
• pp.25-34
• /
• 2011

Objectives The purpose of this study was to examine the characteristics of diagnostic pattern questionnaire associated with Body Mass Index in premenopausal women. Methods We studied 41 patients visiting Gangdong Kyung Hee University Hospital from 1st April 2011 to 25th May 2011. The subjects were categorized in two groups, overweight & obesity group (n=12) and low weight & normal group (n=29). We studied the difference of diagnostic pattern questionnaire scores between two groups by Independent samples T-test and correlation between diagnostic pattern questionnaire scores of overweight & obesity group by Pearson's correlation coefficient test using SPSS for windows (version 13.0). Results Blood stasis, retention of undigested food, cold pattern scores of overweight & obesity group were non-significantly higher than low weight & normal group. Heat pattern score of overweight & obesity group was significantly higher than low weight & normal group. Cold-heat, phlegm-cold, blood stasis-cold, phlegm-blood stasis, phlegm-retention of undigested food significantly showed positive correlation coefficient in overweight & obesity group. Conclusions The results suggest that obese women tend to show heat pattern. It seems to be that multiple factors such as phlegm, blood stasis, retention of undigested food are causative of obesity.

• Archives of Plastic Surgery
• /
• 제35권5호
• /
• pp.565-568
• /
• 2008

Purpose: Bacterial degeneration of sweat and increased secretion of over developed apocrine sweat gland are known causes of osmidrosis. In addition, genetic inheritance must be another important cause, because there are high incidence rates of osmidrosis in familial members. But the research about genetic inheritance has been overlooked. For this reason we studied genetic inheritance in osmidrosis patients based on pedigree analysis. Methods: We have evaluated pedigree of 52 patients who have diagnosed and treated in our hospital from January 2003 to August 2007. For making pedigrees, we have evaluated 3 generations of affected lineage from osmidrosis patients. Family members having uncertain information or those who are before puberty are excluded. In pedigree analysis, inheritance rate and inheritance pattern from parents, prevalence rate in generations and sexual prevalence are evaluated. Results: In this study, we divided pedigrees into 3 different groups according to inheritance pattern. Group A is genetically unrelated pattern with no prevalence between familial members in 7 families. Group B is weakly expressed pattern with 17 families there are genetically related but no genetic patterns are founded. In group B inheritance rate is 34% and incidence rate is 21% in 2nd generation and 22% in 3rd generation. Group C is autosomal dominant pattern with 31 families. In group C, there are no differences in sexual prevalence. Incidence rate is 43% in 2nd generation and 49% in 3rd generation. Conclusion: In this study, we have studied pedigrees of 52 families of osmidrosis patients. 60% of the pedigrees shows autosomal dominant pattern, 33% shows genetically related but no definite autosomal dominant pattern and 7% shows genetically unrelated pattern. In Conclusion, This study can be basic data for future gene analysis study of osmidrosis.