• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.14-20
• /
• 2010

Tribological properties of nanoporous structured alumina film was investigated. Alumina film (AAO: anodic aluminum oxide) of $60{\mu}m$ thickness having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as a counterpart were carried out with wide range of normal load from 1 mN to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient was strongly influenced by the applied normal load. Smooth layer patches were formed on the worn surface of both AAO and steel ball at relatively high load (100 mN and 1 N) due to tribochemical reaction and compaction of wear debris. These tribolayers contributed to the lower friction at high loads. Extremely thin layer patches, due to mild plastic deformation of surface layer, were sparsely distributed on the worn surface of AAO at low loads (1 mN and 10 mN) without the evidence of tribochemical reaction. Delaminated wear particles were generated at high loads by fatigue due to repeated loading and sliding.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.67-75
• /
• 1997

This paper presents a virtual-parallel multistage interconnection network (MIN) which provides multipath between processor and memory module. The proposed virtual-parallel MIN network which uses $m{\times}1$ mutiplexer at the input switching block, $1{\times}m$ demultiplexer at the output switching block and logN-1 switching stages has maximum $2{\times}m$ unique paths between processor and memory module. Because it has multi-redundance paths, a number of processors can connect a specific Also, this new virtual-parallel structured MIN network can reduce packet collision possibility at switching block and it has cost. It shown to improve a performance and to be a very simple structure in comparision with MBSF structured MIN.

• Korean Journal of Cognitive Science
• /
• v.10 no.4
• /
• pp.71-83
• /
• 1999

Conventional symbolic inference systems lack flexibility because they do not well reflect flexible semantic structure of knowledge and use symbolic logic for their basic inference mechanism. For solving this problem. we have recently proposed the 'Connectionist Semantic Network(CSN)' as a model for flexible knowledge representation and inference based on neural networks. The CSN is capable of carrying out both approximate reasoning and commonsense reasoning based on similarity and association. However. we have difficulties in representing general and structured high-level knowledge and variable binding using the connectionist framework of the CSN. In this paper. we propose a hybrid system called SymCSN(Symbolic CSN) that combines a symbolic module for representing general and structured high-level knowledge and a connectionist module for representing and learning low-level semantic structure Simulation results show that the SymCSN is a plausible model for human-like flexible knowledge representation and inference.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.918-924
• /
• 2009

In this paper, we designed micro-structured electromagnetic transducers for energy harvesting and verified the performance of proposed transducers using finite element analysis software, COMSOL Multiphysics. To achieve higher energy transduce efficiency, around the magnetic core material, three-dimensional micro-coil structures with high number of turns are fabricated using semiconductor fabrication process technologies. To find relations between device size and energy transduce efficiency, generated electrical power values of seven different sizes of transducers ($3{\times}3\;mm^2$, $6{\times}6\;mm^2$, $9{\times}9\;mm^2$, $12{\times}12\;mm^2$, $15{\times}15\;mm^2$, $18{\times}18\;mm^2$, and $21{\times}21\;mm^2$) are analyzed on various magnetic flux density environment ranging from 0.84 T to 1.54 T and it showed that size of $15{\times}15\;mm^2$ device can generate $991.5\;{\mu}W$ at the 8 Hz of environmental kinetic energy. Compare to other electromagnetic energy harvesters, proposed system showed competitive performance in terms of power generation, operation bandwidth and size. Since proposed system can generate electric power at very low frequency of kinetic energy from typical life environment including walking and body movement, it is expected that proposed system can be effectively applied to various pervasive computing applications including power source of embodied medical equipment, power source of RFID sensors and etc. as an secondary power sources.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.183-190
• /
• 2009

Increase in the elderly population has given rise to various social problems throughout Korean society, and what is more, although the greater demand of medical treatment, its development is still in its early stages. Given that Specialized Geriatrics Hospital has stood amid a range of spatial complication and it should faithfully reflect the needs of elderly population, we need a better understanding of Specialized Geriatrics Hospital. This study suggested the foundation to plan of Specialized Geriatrics Hospital through analyzing and evaluating spatial configuration of Specialized Geriatrics Hospital by "Space Syntax" and "J-Graph" The study focused on Specialized Geriatric Hospitals existing in Korea which owned more than 100 beds. The result of this study is summarized as follows; First, the rate of separated convex showed that the portions of the Treatment of outpatients and Supply have increased, but onthe other hand the portion of the The ward has been on the decrease. Second, in the case of Treatment of outpatients, it was structured Tree-shaped and the Tree-shaped could be separated with two types: waiting room and wailing room with lounge. in the case of The ward, it was structured Tree-shaped and also Ring-shaped. The more recently opened Geriatrics Hospital, the closer to Ring-shaped. Third, the access to the Ccentral treatment was low though the access to the core of the each floor was high. Fourth, in the progress of intelligibility, the fact that its value has decreased is becoming a serious problem of medical development for the elderly population finally, according to J-graph's analysis, the hallway made the spatial depth of rooms and public space more deepened. This caused by scattered arrangement of public spaces. As the only planning were considered in this study, It therefore needs more diversified approaches considering physical factors such like real distance and area.

• Journal of the Korean Institute of Rural Architecture
• /
• v.3 no.1
• /
• pp.25-40
• /
• 2001

In this study, I investigate the formation process of the American presbyterian missionary architecture in Cheong Ju area from 1900 to 1945, which we may think 'the part of Korean modern architecture'. I have examined and analyzed the 18 buildings for the sake of the interpretation with the words of formation process and characteristics . And I can put my idea in order as follows. Firstly, the formation process is 1) buy and modify a Korean style (thatch or tile roofed) building for their need and use it as a gate quaters or house, church, hospital, school, book store, 2) build a Korean style (tile roofed) building and use it-house, hospital, school, 3) build a Western style (timber structured and zinc roofed) building and use it- church, 4) build a Western style (masonry structured and tile or zinc roofed) building and use ithouse, church, school and hospital. Secondly, the characteristics is 1) In the Korean style building, the missionaries change into the function to match with their purpose. they modify the Korean style timber structure by influx of building material-brick, glass, carpet etc. they occupy into the Korean existing residential area. 2) In the Western style building, the missionaries build the house correspond with their living pattern. they build the church with the eclectic of Western and Korean timber frame. and also build the house and hospital with the eclectic of Western and Korean masonry structure. their building located in the isolate hill separated from the existing Korean residential area.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.413-418
• /
• 2015

In this paper, we design new video metadata schema for searching video segments to create UEC (User Edited Contents). The proposed video metadata schema employs hierarchically structured units of 'Title-Event-Place(Scene)-Shot', and defines the fields of the semantic information as structured form in each segment unit. Since this video metadata schema is defined by analyzing the structure of existing UECs and by experimenting the tagging and searching the video segment units for creating the UECs, it helps the users to search useful video segments for UEC easily than MPEG-7 MDS (Multimedia Description Scheme) which is a general purpose international standard for video metadata schema.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.998-1005
• /
• 2017

In this paper, we first introduce a systematic verification procedure for hierarchically structured avionics system. By making use of equipment models, it can perform individual verifications of each subsystem, integrated verifications of multiple subsystems, and an integrated verification of a whole system. A multi-mode system integration laboratory is then proposed to make it possible to execute various individual or integrated verification tests at the same time. By mathematically proving that the proposed multi-mode system integration laboratory needs less verification time than the conventional verification methodology, it is expected to enhance the efficiency of the systematic verification procedure and as a result, reduce the overall verification period and costs.

• IE interfaces
• /
• v.16 no.3
• /
• pp.362-374
• /
• 2003

The major objective of this paper is to empirically examine the effect of process maturity on the performance of industrial R&D projects. Process maturity, a fundamental concept of the Capability Maturity Model developed by Software Engineering Institute, represents the essential of Total Quality Management (TQM). Based on literature, our research model constructs process maturity in terms of structured process, goal setting and controlling, metrics, and process learning; and links it to the R&D performance that consists of technical, commercial and managerial successes. The model also includes firm size as a moderator of different effects that process maturity may have across firms. Measures for process maturity are based on the best practices identified in literature. Data are obtained from 77 successful R&D projects carried out by Korean manufacturing firms. Multiple regression and t-test are used to test proposed hypotheses. Findings are as follows. (1) In the R&D process, process maturity partially contributes to the performance of R&D projects. More specifically, goal setting and controlling-related practices drive both technical and commercial successes, while process learning-related practices drive commercial success. In contrast, traditionally emphasized elements such as structured process or metrics are found not to be significant. (2) The degree of process maturity is significantly higher in large firms. (3) Process maturity impacts on commercial success in the case of large firms, whereas it does on technical success in the case of small firms. The results imply that the TQM principles are partially associated with R&D performance, and the nature of benefit from high maturity could vary according to firm size.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.208-218
• /
• 2014

Objectives: The major objective of this study was to develop and validate a tier 1 exposure model utilizing worker exposure monitoring data and characteristics of worker activities routinely performed at construction sites, in order to estimate worker exposures without sampling. Methods: The Registration, Evaluation, Authorization and Restriction of Chemicals(REACH) system of the European Union(EU) allows the usage of exposure models for anticipating chemical exposure of manufacturing workers and consumers. Several exposure models have been developed such as Advanced REACH Tools(ART). The ART model is based on structured subjective assessment model. Using the same framework, a tier 1 exposure model has been developed. Worker activities at construction sites have been analyzed and modifying factors have been assigned for each activity. Korean Occupational Safety and Health Agency(KOSHA) accrued work exposure monitoring data for the last 10 years, which were retrieved and converted into exposure scores. A separate set of sampling data were collected to validate the developed exposure model. These algorithm have been realized on Excel spreadsheet for convenience and easy access. Results: The correlation coefficient of the developed model between exposure scores and monitoring data was 0.36, which is smaller than those of EU models(0.6~0.7). One of the main reasons explaining the discrepancy is poor description on worker activities in KOSHA database. Conclusions: The developed tier 1 exposure model can help industrial hygienists judge whether or not air sampling is required or not.