• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.480-489
• /
• 1988

Although CDP stacking of common depth gathering is used to get the zero-offset-section, the exploding reflector concept is examined for the modeling of zero source to receiver offset sections in this paper. The acoustic wave equation is compared with a one way wave equation which represents the upgoing wave field only. The one way wave equation used is not derived through an expansion and, therefore, can represent dips up do 90b degrees and may not lost the signals by the dipping angles. There is apparently no simple counterpart of this equation is the space domain and it can be conveniently implemented only by a Fourier method. This paper compares their modeling technique with ray tracing and wave method for over thrust structure which is one of the geological structures are dificult to process and interpret. As a result of modeling much clean and accurate signals, especially, diffractions form the corner and dipping angles can be gathered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.919-929
• /
• 2014

In recent, the requirements for the safety to the effects of high power electromagnetic wave have been increased along with the development of electricity and electronic equipments. The small sized electronic devices and the various components have been analyzed by using the full-EM simulation and solving a complete set of Maxwell equation. However, the deterministic approach has a drawback and much limitation in the electromagnetic analysis of an electrically large cavity with a high complexity of the structure. In this paper, statistical theory and topological modeling method are combined to analyze the large cavity with a complex structure. In particular, the PWB(Power Balance) method and BLT(Baum-Liu-Tesche) equation are combined and employed to solve the frequency response to the large-scaled cavity with remarkably reduced time-consumption. For instance, a PCB substrate inside box of box are considered as a large structure with a complexity.

• KIPS Transactions on Computer and Communication Systems
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2024

In the development and mass production of polymers, there are many uncontrollable variables. Even small changes in chemical composition, structure, and processing conditions can lead to large variations in properties. Therefore, Traditional linear modeling techniques that assume a general environment often produce significant errors when applied to field data. In this study, we propose a new modeling method (GPR-SEM) that combines Structural Equation Modeling (SEM) and Gaussian Process Regression (GPR) to study the Friction-Coefficient and Flexural-Strength properties of Polyacetal resin, an engineering plastic, in order to meet the recent trend of using plastics in industrial drive components. And we also consider the possibility of using it for materials modeling with nonlinearity.

• Journal of Agricultural Extension & Community Development
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2018

This study aims to identify factors affecting the acceptance intention of cultivating a new Italian ryegrass(IRG) variety using partial least square structural equation modeling(PLS-SEM) and find priority to maximize the acceptance intention of new IRG variety using importance-performance matrix analysis(IPMA). The data were collected on a seven-point Likert-type from 188 farm households located in Korea central region for two months. As a major result of PLS-SEM, expected effect significantly affected acceptance intention. The IPMA also showed expected effect should be considered as the most important factor to improve the acceptance intention. This study suggested the new technology distributors should scientifically prove and actively promote the effects such as increase in farm income, productivity improvement, labor saving and management efficiency caused by planting new IRG variety.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.297-311
• /
• 2018

Plate and shell structure is widely applied in engineering, i.e. building roofs, aircraft wings, ship platforms, and satellite solar arrays. Its vibration problem has become increasingly prominent due to the tendency of lightening, upsizing and flexibility. As a new smart material with great actuating force and toughness, macro-fiber composite (MFC) is composed of piezoelectric fiber and epoxy resin basal body, which can be directly pasted onto the surface of plate and shell and is suitable for vibration control. This paper deduces the actuation equation of MFC coupled plate in different boundary conditions, an equivalent finite element modeling method is proposed which uses MFC actuating force as the applied excitation, and on this basis the active control simulation and experiment of MFC over plate and shell structure vibration are accomplished. The results indicate that MFC is able to implement effective control over plate and shell structure vibration in multi-band range. The comparison between experiment and simulation proves that the actuation equation deduced herein, effective and practicable, can be applied into the simulation calculation of MFC vibration control over plate and shell structure.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.683-686
• /
• 2005

By now, we have been analysing the resistance values on 3 dimensional structure using experimental statical method or theoretical modeling, while devices miniaturizing reveals the limitation of the traditional methods to calculate 3 dimensional resistance. In addition, 2 dimensional analysing can not produce 3 dimensional characteristic following miniaturizing. To solve the limitations , we must do high level modeling of semi-conductor process. In this thesis, we analyzed the Laplace equation that is the basic and important for 3 dimensional structure resistance with computer simulation method and on the basis of this, analyzed the characteristic of resistance of 3 dimensional structure communication semiconductor device.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.201-208
• /
• 2005

Neuro-Fuzzy modeling approach is proposed to predict the dynamic behavior of a single-degree-of-freedom structure that is equipped with hybrid base isolation system. Hybrid base isolation system consists of friction pendulum systems (FPS) and a magnetorheological (MR) damper. Fuzzy model of the M damper is trained by ANFIS using various displacement, velocity, and voltage combinations that are obtained from a series of performance tests. Modelling of the FPS is carried out with a nonlinear analytical equation that is derived in this study and neuro-fuzzy training. Fuzzy logic controller is employed to control the command voltage that is sent to MR damper. The dynamic responses or experimental structure subjected to various earthquake excitations are compared with numerically simulated results using neuro-fuzzy modeling method. Numerical simulation using neuro-fuzzy models of the MR damper and FPS predict response of the hybrid base isolation system very well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.339-344
• /
• 2011

In the past much effort has been made to utilize advanced computational fluid dynamic (CFD) programs for aeroelastic simulations and analysis. However, it is limited in the field of unsteady aeroelasticity due to enormous size of computer memory and unreasonably long CPU time. Recently, AAEMS(Aerodynamics is Aeroelasticity minus Structure) was developed for linear time-invariant, coupled fluid-structure systems. In this paper, to demonstrate further the efficiency and accuracy of the new model reduction method, we successfully examine AGARD 445.6 wing modeled by FLUENT CFD, FSIPRO3D and NASTRAN FEM(Finite Element Method) programs. Using the ROM(Reduced Order Modeling) one can predict flutter boundary as a function of the dynamic pressure.

• Communications for Statistical Applications and Methods
• /
• v.4 no.2
• /
• pp.589-610
• /
• 1997

When a modeling process is applied to an actual commodity market in the real world, interactions over closely related commodities through the marketing channel should also be formulated into the model to reflect the information that exists in the whole market system, otherwise unreliable estimates and test statistics may be produced by ignoring those effects. Single-equation type model in this case tends to yield inefficient estimates, and sometimes biased and inconsistent, which will mislead us. A system of equation method to examine the structure of the imported commodity market system is developed and its emtirical results are analyzed, then followed by some policy experiments and its implications.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.781-783
• /
• 1993

The GTO model is based on the Ebers-Moll equation extened to include the three-junction devices and a detailed description of the implementation of the model equation as well as defferent tests are discussed. Problems to be considered for the snubber design, such as voltage spike reduction, maximum GTO anode current, and switching power, were discussed using the calculation model. The macro model is very useful for simulation of GTO circuit and high power circuit switch in high frequency and complex structure.