• Steel and Composite Structures
• /
• 제23권4호
• /
• pp.385-397
• /
• 2017

Currently, CFRP (Carbon Fiber Reinforced Polymer) plate bonding is used quite extensively as a strengthening method. In this technique, a composite CFRP plate or sheet of relatively small thickness is bonded with an adhesion material to steel or concrete structure in order to improve its structural behavior and strength. The sheets or plates do not require much space and give a composite action between the adherents. In this study, the rotation capacity of CFRP-strengthened cold-formed steel (CFS) beams has been evaluated through numerical investigation. Studies on different structural levels have been performed. At the beam level, C-section has been adopted with different values of profile thickness, web height, and flange width. At the connection level, a web bolted moment resistant type of connection using through plate has been adopted. In web-bolted connections without CFRP strengthening, premature web buckling results in early loss of strength. Hence, CFRP sheets and plates with different mechanical properties and geometric configurations have been examined to delay web and flange buckling and to produce relatively high moment strength and rotation capacity. The numerical results reveal that CFRP strengthening may increase strength, initial stiffness, and rotation capacity when compared with the case without strengthening.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.219-223
• /
• 2002

The actual behavior of joint is traditionally disregarded in steel frame design. In fact, the structural analysis of steel frames is generally carried out by assuming that joints fulfil the ideal condition of either a hinge or a fixed-end restraints. In this way, calculations are made somewhat simpler, but the structural model is not able to reflect the actual structural response. Therefore, steel frame classification system for estimation or analysis about behavior of steel frame should be established, and range that each connections belongs should be divided definitely. This research presents realistic and practical moment-rotation relation through investigation and analysis of steel frame beam-to-column classification system.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.197-208
• /
• 1998

This study was carried out to compare the amount of the maxillary bone remodeling and tooth displacement in each three maxillary superimposition methods, Ricketts, Best-fit, Structural method. Forty cases of the lateral cephalometric radiographs from 27 boys and 13 girls who had been treated to correct anterior cross-bite were selected for the study. The initial radiographs were taken at about 8-year-old and the second radiographs were taken in about 3.3 years later. Followings were the results: 1. With the Structural method, backward movement was shown in PNS, while forward movement was observed in ANS and point A. With the Ricketts method, however, all structures were shown significant backward movement comparing with Structural method(P<0.05). With the Best-fit method, the amount of horizontal movement was similar to that of the Structural method(P>0.05). 2. The palate seemed to be moved downward with Structural method, but there was no measured downward remodeling on nasal floor with Ricketts and Best-fit method(P<0.05). 3. Comparing with Structural method, Ricketts and Best-fit method significantly underestimated the eruption of the teeth by 20% to 30% (P<0.05). 4. The Structural method showed the anteroinferior rotation (43%) and posteroinferior rotation(57%) of the palatal plane, while the Best-fit method showed mostly anterosuperior rotation(87%), but no change was found in the Ricketts method. 5. With the Structural method, there was a statistically significant correlation between the amount of the rotation of the palatal plane and that of N-S line(r=0.86). 6. The measured angles of the long axis of the incisors and molars showed no significant difference in each 3 methods(P>0.05).

• 한국지구과학회지
• /
• 제34권3호
• /
• pp.189-194
• /
• 2013

회전하는 수조에서 나타나는 순압성 소용돌이의 패턴과 구조 회전에 대한 연구를 수행하였다. 소용돌이는 수면 위에 접촉된 원판을 수조에 대해 상대적으로 회전시키는 방법을 통해 만들어졌다. 회전원판의 크기, 회전방향, 회전속력에 따라 트라이폴라 소용돌이, 삼각형 소용돌이, 사각형 소용돌이, 커다란 원형 소용돌이가 안정하게 나타났고, 모양이 계속 변하는 불안정한 소용돌이도 나타났다. 회전원판과 수조 벽 사이의 간격이 안정한 소용돌이의 패턴에 큰 영향을 주었고 불안정한 소용돌이는 원판이 시계방향으로 빠르게 회전할 때 주로 나타났는데, 그 원인은 원심력적 불안정성이었다. 한편, 트라이폴라 소용돌이에서 나타난 전체 패턴의 구조적 회전 각속도는 원판 가장자리의 선속도에 비례하였고, 고기압성 트라이폴라 소용돌이가 저기압성 보다 더 큰 구조 회전 각속도를 가졌다. 로스비 수와 구조회전의 관점에서 볼 때, 해양에서 발견된 트라이폴라 소용돌이와 본 실험에서 나타난 트라이폴라 소용돌이는 유사하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.145-151
• /
• 1994

Welded connections have been designed on basis of allowable stresses, wherein the response to loading is assumed to be totally elastic. This is the vector analysis method, which resolves the stresses determined from the direct stress formula and the torsion formula into a vector combination to obtain a solution. It has been known that this method gives conservative answers and typically a very high factor of safety. An analytical method based on the Instantaneous Center of Rotation has been developed which predicts the ultimate strength of an eccentically loaded fillet welded connection. The method of Instantaneous Center of Rotation results in weld resistance capacities greater than the vector analysis method, by recognizing the variation in fillet weld strength with respect to the direction of the applied loading and actual load-deformation response of elemental fillet welds. The procedure of numerical analysis is iterative and complex. The relations between vector analysis method and the method of Instantaneous Center of Rotation on eccentrical distance subjected to variation of load direction are presented in this paper. Considering of the effects on configuration of weld groups, the method of Instantaneous Center of Rotation are provided a more exact results of the numerical analysis.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.649-665
• /
• 2015

The present paper attempts to investigate the propagation of plane waves in generalized piezo-thermoelastic medium under the effect of rotation. The normal mode analysis is used to obtain the expressions for the displacement components, the temperature, the stress and the strain components. Comparisons are made with the results predicted by different theories (Coupled theory, Lord-Schulman, Green-Lindsay) in the absence and presence of rotation.

• 전산구조공학
• /
• 제23권3호
• /
• pp.69-74
• /
• 2010

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.23-30
• /
• 1976

이 논문에서는 위상회전에 의한 오목구조의 짐출로서 필기체 한글을 인식하는 한 방법을 검토한다. 문자 Pattern를 오목구조적인 기본 Segment로 분해하여 집합으로 분류하고, 그들 집함에 대한 각 Segment의 폐상태와 위상특징을 logic으로 표현한다. 다음 그들 logic pattern의 위상회전으로서 오목구조의 topological성질과 위상특징을 검출하여 문자를 결정한다. 이 방법은 필기체의 변화와 문자의 대소, 경사 띤 위치 변위에 대한 식별의 유연성을 가지며, 인식율이 높다. In this paper, a method is proposed for the recognition of hand-written Hangeul. This is peiformed by extraction of the concave structural segments by phase rotation. Character patterns can be decomposed into the fundamental concave structural segments which are also categorized into segment sects, and the closure and phase features of each segment in set is represented by logics. By rotating the logic pattern, the topological and phase features of segment are extracted for the reliable recognition of the character. It is also evaluated that this method applies to a wide variety of shape, position and declination of the character.

• Structural Engineering and Mechanics
• /
• 제73권2호
• /
• pp.123-132
• /
• 2020

Steel spherical hinged bearings have high loading capacity, reliable load transfer, flexible rotation with universal hinge and allowance of large displacement and rotation angle. However, bearings are in complex forced states subject to various load combinations, which lead to the significant influence on integral structural safety. Taking the large-tonnage complex steel spherical hinged bearings of Terminal 2 of Guangzhou Baiyun International Airport as an example, full-scale rotation and shear behaviour tests of the bearings subject to axial tensile load are carried out, and the corresponding finite element simulation analyses are conducted. The results of experiments and finite element simulations are in good agreement with the coincident development tendency of stress and deformation. In addition, the measured rotational moment is less than the calculated moment prescriptive by the code, and the relationship between horizontal displacement and horizontal shear force is linear. Finally, based on these results, the rotation and shear stiffness models of bearings subject to axial tensile load are proposed for the refinement analysis of integral structure.