• 한국안전학회지
• /
• 제27권4호
• /
• pp.50-61
• /
• 2012

In recent years, various research and developments to introduce composite bridges of new concept have been performed. The types of integral bridge and portal rigid frame bridge are having advantages in bridge maintenance and structural efficiency by eliminating expansion joints and bridge supports. However, the detail of typical girder-abutment connection has problems such as complexity of construction and increase of the construction cost. A new type of bridge, called prestress integral composite girder(PIC girder) bridge, is proposed in this study, which decreases the cost of construction and improves the efficiency of construction by simplifying the detail of construction for girder-abutment connection. PIC girder bridge has the connection detail in which the steel girder and the abutment are integrated by using the PS bar installed in the connection. In this study, finite element analysis and mock-up load test are conducted to evaluate the propriety of design, the effective of fabrication and structural safety for PIC girder bridge. The adequacy of the PIC giredr bridge is verified by the results of static/dynamic load test and finite element analyses.

• Structural Monitoring and Maintenance
• /
• 제1권1호
• /
• pp.111-130
• /
• 2014

The increased use of carbon fiber reinforced polymer (CFRP) in retrofitting reinforced concrete (RC) members has led to the need to develop non-destructive techniques that can monitor and characterize the unique damage mechanisms exhibited by such structural systems. This paper presented the damage characterization results of six CFRP retrofitted RC beam specimens tested in the laboratory and monitored using acoustic emission (AE). The focus of this study was to continuously monitor the change in AE parameters and analyze them both qualitatively and quantitatively, when brittle failure modes such as debonding occur in these beams. Although deterioration of structural integrity was traceable and can be quantified by monitoring the AE data, individual failure mode characteristics could not be identified due to the complexity of the system failure modes. In all, AE was an effective non-destructive monitoring tool that can trace the failure progression in RC beams retrofitted with CFRP. It would be advantageous to isolate signals originating from the CFRP and concrete, leading to a more clear understanding of the progression of the brittle damage mechanism involved in such a structural system. For practical applications, future studies should focus on spectral analysis of AE data from broadband sensors and automated pattern recognition tools to classify and better correlate AE parameters to failure modes observed.

• Smart Structures and Systems
• /
• 제26권2호
• /
• pp.135-146
• /
• 2020

This paper deals with an application of adaptive blind source separation (BSS) method, equivariant adaptive separation via independence (EASI), and Teager Energy Operator (TEO) for online identification of structural modal parameters. The aim of adaptive BSS methods is recovering a set of independent sources from their unknown linear mixtures in each step when a new sample is received. In the proposed approach, firstly, the EASI method is used to decompose structural responses into independent sources at each instance. Secondly, the TEO based demodulation method with discrete energy separation algorithm (DESA-1) is applied to each independent source, and the instantaneous frequencies and damping ratios are extracted. The DESA-1 method can provide the fast time response and has high resolution so it is suitable for online problems. This paper also compares the performance of DESA-1 algorithm with Hilbert transform (HT) method. Compared to HT method, the DESA-1 method requires smaller amounts of samples to estimate and has a smaller computational complexity and faster adaption due to instantaneous characteristic. Furthermore, due to high resolution of the DESA-1 algorithm, it is very sensitive to noise and outliers. The effectiveness of the proposed approach has been validated using synthetic examples and a benchmark structure.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2000년도 International Symposium on Bioinformatics
• /
• pp.32-34
• /
• 2000

Computational chemistry is a discipline using computational methods for the calculation of molecular structure, properties, and reaction or for the simulation of molecular behavior. Relating and turning the complexity of data from genomics, high-throughput screening, combinatorial chemical synthesis, gene-expression investigations, pharmacogenomics, and proteomics into useful information and knowledge is the primary goal of bioinformatics. In particular, the structure-based molecular design is one of essential fields in bioinformatics and it can be called as structural bioinformatics. Therefore, the conformational analysis for proteins and peptides using the techniques of computational chemistry is expected to play a role in structural bioinformatics. There are two major computational methods for conformational analysis of proteins and peptides; one is the molecular orbital (MO) method and the other is the force field (or empirical potential function) method. The MO method can be classified into ab initio and semiempirical methods, which have been applied to relatively small and large molecules, respectively. However, the improvement in computer hardwares and softwares enables us to use the ab initio MO method for relatively larger biomolecules with up to v100 atoms or ∼800 basis functions. In order to show how computational chemistry can be used in structural bioinformatics, 1 will present on (1) cis-trans isomerization of proline dipeptide and its derivatives, (2) positional preference of proline in ${\alpha}$-helices, and (3) conformations and activities of Arg-Gly-Asp-containing tetrapeptides.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.821-827
• /
• 2015

This study concentrates on a wave energy converter with floaters that extracts the ocean's energy by moving up and down with the wave motion. The floater is connected to an arm structure, including a hydraulic cylinder that drives a hydraulic generator. This study focuses on a structural analysis of the floater unit, including arm and cylinder components, platform and jack-up system, along with spud columns. Previous studies have been conducted for miniature models for experimentation, but this study focuses on the full-scale model structural analysis. Static structural analysis is conducted using fine numerical grids. Due to the complexity of the whole model, it is analyzed in separate pieces. The floater unit, with arm and cylinder, are combined into one system. The platform is analyzed separately as a single system. There are four jack-up systems for each spud column; only one jack-up system is analyzed, as uniform loads are assumed on each system. There are several load cases for each system, all of which are analyzed thoroughly for stress (von Mises, shear, and normal) and deformation. Acceptable results were obtained for most of the components; unsafe components were redesigned.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1079-1092
• /
• 2020

A parametric study of several parameters relevant to design safety on the spent nuclear fuel (SNF) rod response under a drop accident is presented. In the view of the complexity of interactions between the independent safety-related parameters, a factorial design of experiment is employed as an efficient method to investigate the main effects and the interactions between them. A detailed single full-length fuel rod is used with consideration of post-irradiated fuel conditions under horizontal and vertical free-drops onto an unyielding surface using finite-element analysis. Critical drop heights and critical g-loads that yield the threshold plastic strain in the cladding are numerically estimated to evaluate the fuel rod structural resistance to impact load. The combinatory effects of four uncertain parameters (pellet-cladding interfacial bonding, material properties, spacer grid stiffness, rod internal pressure) and the interactions between them on the fuel rod response are investigated. The principal finding of this research showed that the effects of above-mentioned parameters on the load-carrying capacity of fuel rod are significantly different. This study could help to prioritize the importance of data in managing and studying the structural integrity of the SNF.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.731-741
• /
• 2019

Shear deformation effects are neglected in most structural system identification methods. This assumption might lead to important errors in some structures like built up steel or composite deep beams. Recently, the observability techniques were presented as one of the first methods for the inverse analysis of structures including the shear effects. In this way, the mechanical properties of the structures could be obtained from the nodal movements measured on static tests. One of the main controversial features of this procedure is the fact that the measurement set must include rotations. This characteristic might be especially problematic in those structures where rotations cannot be measured. To solve this problem and to increase its applicability, this paper proposes an update of the observability method to enable the structural identification including shear effects by measuring only vertical deflections. This modification is based on the introduction of a numerical optimization method. With this aim, the inverse analysis of several examples of growing complexity are presented to illustrate the validity and potential of the updated method.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.653-662
• /
• 2014

구조실험을 위한 데이터 저장소는 구조실험에 관련된 실험정보를 구조공학자와 연구자들이 편리하게 저장하고 열람할 수 있도록 효율적인 구성을 가져야 한다. 데이터 저장소에 대한 평가는 데이터 저장소 자체적인 구성에 대한 평가와 데이터 저장소에 저장된 실제 정보의 구성에 대한 평가로 나눌 수 있다. 데이터 저장소의 자체적인 구성은 클래스로 나타낼 수 있고 데이터 저장소 내에 저장된 실제의 실험정보는 객체로 표현할 수 있는데 본 논문은 클래스와 객체가 가지고 있는 속성구성에 대한 평가요소를 제안한다. 클래스의 속성구성 평가요소로는 클래스내 속성수와 구체적인 값 또는 객체에 의해 구분한 속성의 종류별 수 등이 있는데 이러한 평가요소들을 이용하여 데이터 저장소가 정한 구성을 이해할 수 있다. 객체의 속성구성 평가요소로는 객체내 값있는 속성수 등이 있는데 데이터 저장소내의 실제 실험정보가 레벨별로 어떻게 저장되어 있는가를 파악할 수 있다.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.675-683
• /
• 1987

In general, texture images with regular patterns can be described by using the standard texture model regularity vectors for their shape analysis. Early methods not only take much time but also have computational complexity in obtaining regularity vectors. The proposed some improved preprocessing algorithms for texture analysis. Finally, we showed the utility of the proposed method through texture synthesis by making use of the results of texture analysis.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.145-152
• /
• 1997

We present a continuous resource allocation problem with maximin objective functions under the generalized lower bound(GLB) and generalized upper bound(GUB) constraints. This problem is an extension for the problems of previous studies. An efficient algorithm is developed by exploiting extended structural properties, where n is the total number of variables. The worst computational complexity of the proposed algorithm is O(nlogn).