• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1034-1040
• /
• 1997

A solar cell conversion effiency was degraded by grain boundary effect in polycrystalline silicon. Grain boundaries acted as potential barriers as well as recombination centers for the photo-generated carriers. To reduce these effects of the grain boundaries we investigated various influencing factors such as emitter thickness thermal treatment preferential chemical etching of grain boundaries grid design contact metal and top metallization along boundaries. Pretreatment in $N_2$atmosphere and gettering by POCl$_3$and Al were performed to obtain multicrystalline silicon of the reduced defect density. Structural electrical and optical properties of slar cells were characterized before and after each fabrication process. Improved conversion efficiencies of solar cell were obtained by a combination of pretreatment above 90$0^{\circ}C$ emitter layer of 0.43${\mu}{\textrm}{m}$ Al diffusion in to grain boundaries on rear side fine grid finger top Yb metal and buried contact metallization along grain boundaries.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1430-1432
• /
• 1997

A solar cell conversion effiency was degraded by grain boundary effect in polycrystalline silicon. To reduce these effects of the grain boundaries, we investigated various influencing factors such as preferential chemical etching of grain boundaries, grid design, transparent conductive thin film, and top metallization along grain boundaries. Pretreatment in $N_2$ atmosphere and gettering by $POCl_3$ and Al were performed to obtain polycrystalline silicon of the reduced defect density. Structural, electrical, and optical properties of solar cells were characterized. Improved conversion efficiencies of solar cell were obtained by a combination of Al diffusion into grain boundaries on rear side, fine grid finger, top Yb metal grid on Cr thin film of $200{\AA}$ and buried contact metallization along grain boundaries.

• 한국결정학회지
• /
• 제6권2호
• /
• pp.69-74
• /
• 1995

Ge bicrystal 기판 위에 OMVPE 기법을 이용하여 GaAs 에피층을 성장시킴으로써 특정한 교차각을 갖는 GaAs 기울임입계를 제조하였다. 또한 (110) Ge 기판 위에 성장된 GaAs 에피층 내의 쌍정들로부터 ∑ =9 기울임입계들이 생성되었다. 고분해 투과전자현미경을 이용하여 1차 및 2차 쌍정계면들의 구조적 특징들을 고찰하였다. 입계에서의 결합극성은 특정한 회절조건에서 입계 양쪽의 입자로부터 기록된 (200) 수렴성 빔 디스크 내의 HOLZ 선 콘트라스트를 응용하여 파악하였으며, 원자컬럼이나 채널등과 상관된 구조상 콘트라스트 양태를 동일한 사진 내의 1차 쌍정계면 거울면의 콘트라스트로부터 파악하였다. ∑ =9, (115)/(111)[110] 기울입입계는 5-6-7- 모서리 링으로 구성된 단위구조를 나타내며, 입계 양쪽에 놓인 입자들은 입계에서 anti-site type cross-boundary bonding의 분율이 최소화되도록 배향되어 있다.

• 음성과학
• /
• 제11권2호
• /
• pp.137-150
• /
• 2004

This paper investigates the prosodic characteristics of discourse boundaries in spontaneous conversation. In this study, the term 'conversation' is taken to refer to a kind of talk in which two or more participants alternate in speaking about particular topics. Such a definition implies that there are at least two sorts of structures in the conversation: textual structure and interactive structure. This requires us to consider not just the textual influences on prosody but also the impact of interactive context. The aim of this study is to find out the acoustic-prosodic means used by speakers to signal discourse boundaries in conversational interaction. The results show that the conflict between the structural level and the interactive level obliges the speakers to reorganize the prosodic variables according to the type of discourse boundaries.

• 비파괴검사학회지
• /
• 제8권1호
• /
• pp.30-37
• /
• 1988

Interfaces, both grain boundaries and phase boundaries, play a very important role in the mechanical behavior of structural materials. The problemis particularly intense in composite materials where interfaces play a primary role in the meehanical response of the composites. This paper will concentrate on the approaches to perform nondestructive evaluation of the interfaces in a man nor in which some measure of the mechanical behavior of the interface can be established. Some of the possible approaches that may have potential for the nondestructive evaluation of interfaces are optical, electronic/ electrical, and acoustic approaches.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.85-91
• /
• 2000

The smallest value of the load when the equilibrium condition becomes to be unstable is defined as the buckling load. The primary objective of this paper is to analyse stability boundaries for star dome under combined loads and is to investigate the iteration diagram under the independent loading parameter In numerical procedure of the geometrically nonlinear problems, Arc Length Method and Newton-Raphson iteration method is used to find accurate critical point(bifurcation point and limit point). In this paper independent loading vector is combined as proportional value and star dome was used as numerical analysis model to find stability boundary among load parameters and many other models as multi-star dome and arches were studied. Through this study we can find the type of buckling mode and the value of buckling load.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.413-420
• /
• 2003

In this paper an analytical study is carried out to examine the effectiveness of absorbing boundaries using dashpot. Validity of the absorbing boundary conditions suggested by Lysmer-Kuhlemeyer and White et al. is investigated by adopting the solution of Miller and Pursey. The Miller and Pursey's problem is then numerically simulated using the finite element method. The absorption ratios are calculated by comparing the displacements at the absorbing boundary to those at the free field without the absorbing boundary. The numerical verification is carried out through comparison of displacement at the boundary.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.107-110
• /
• 2004

In this paper, a new structural health monitoring technique for composite laminates through the use of embedded fiber Bragg grating (FBG) sensors is presented. The method traces the ply stress states of a laminate and compares them with failure criteria during the service time of structures. The ply stress state of every ply composing the composite laminate can be obtained using classical lamination theory by embedded FBG sensors in the laminate. Graphite/epoxy laminate specimens, embedded with three FBG sensors, were fabricated. Tension tests were performed to evaluate the ply stress states tracing technique. Experimental results show that laminates experience fracture when the ply stress states are over the boundaries of failure criteria. In this method, critical damage can be detected by the ply stress states which are close to the boundaries of the failure criteria.

• 한국결정학회지
• /
• 제7권2호
• /
• pp.156-164
• /
• 1996

GaAs ∑19, {331}/{331} [110]과 ∑3 {111}/{111} [110] 기울임입계의 구조적 특징을 고분해투과전자현미경을 이용하여 분석하였다. 이 입계들은 격자일치점의 면밀도가 높은 결정면을 평행하게 놓여 있으며, 특정한 원자배열단위를 나타낸다. 입계에서 관측된 이차입계전위들의 코어 직경의 약 2nm정도이며 이들이 놓인 입계부분에서 입계계단이 생성된다. 이들 입계계단과 이차입계전위의 상관관계를 DSC격자를 이용하여 고찰하였다.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.377-386
• /
• 2022

This paper considers dynamic impedance functions and presents a detailed analysis of the soil plasticity influence on the pile-group foundation dynamic response. A three-dimensional finite element model is proposed, and a calculation method considering the time domain is detailed for the nonlinear dynamic impedance functions. The soil mass is modeled as continuum elastoplastic solid using the Mohr-Coulomb shear failure criterion. The piles are modeled as continuum solids and the slab as a structural plate-type element. Quiet boundaries are implemented to avoid wave reflection on the boundaries. The model and method of analysis are validated by comparison with those published on literature. Numerical results are presented in terms of horizontal and vertical nonlinear dynamic impedances as a function of the shear soil parameters (cohesion and internal friction angle), pile spacing ratio and frequencies of the dynamic signal.