• Computational Structural Engineering
• /
• v.31 no.2
• /
• pp.4-8
• /
• 2018

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3353-3360
• /
• 2022

Using data from the design earthquake of the Korean standard nuclear power plant, seismic analyses of a fuel assembly are conducted in this study. The modal characteristics are used to develop an input deck for the seismic analysis. With a time history analysis, the responses of the fuel assembly in the event of an earthquake are obtained. In particular, the displacement, velocity, and acceleration responses at the center location of the fuel assembly are obtained in the time domain, with these outcomes then used for a detailed structural analysis of the fuel rods in the ensuing analyses. The response spectra are also generated to determine the response characteristics in the frequency domain. The structural integrity of the fuel assembly can be ensured through this type of time history analysis considering the input excitations of various earthquakes considered in the design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.29-35
• /
• 2014

This paper aims to obtain the effect of lightweight on Radius rod. The response surface method used in the paper is the statistical method. Optimization method is performed with the Radius rod using the lightweight material. Structural analysis is executed by using the ANSYS program to find static and dynamic responses. From this study result, it is verified that the response surface method has the advantage of optimum value in comparison with other optimization methods. The analysis is also performed by response surface method to derive optimal design values. Steel model and aluminium initial model are obtained by finite element analysis to clarify design criteria and the results are compared with three models each other. The weights can be reduced by optimal design analysis results of these models similar to those of existing products. The quantitative goals in this study can also attained through results of fatigue analyses. The reliability on optimal design of Radius rod can be improved by use of structural and fatigue analysis results.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.176-179
• /
• 1998

In structural analysis using FEM or BEM, pre_ and post_processor is necessary pre_ and post_processor and analyzer use same structural model. But many other tasks related to structural design, such as optimization, design of layout, etc, do not share that model in spite of their resemblance of requiring data. So, a pre_ and post_ processor was developed using a relational database managing system. Developed system uses the DBMS as a data storage and interacts with it using SQL interface. In this way, many other tasks that uses same structural data can be developed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2438-2450
• /
• 2000

The Design Axioms provide a general framework for design methodologies. The axiomatic design framework has been successfully applied to various design tasks. However, the axiomatic design has been rarely utilized in the detailed design process of structures where the optimization technology is generally carried out. The relationship between the axiomatic design and the optimization is investigated and Logical Decomposition method is developed for a systematic structural optimization. The entire optimization process is decomposed to satisfy the Independence Axiom. In the decomposition process, design variables are grouped according to sensitivities. The sensitivities are evaluated by the Analysis of Variance(ANOVA) to avoid considering only local values. The developed method is verified through examples such as the twenty -five members transmission tower and the two -bay-six-story frame.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.9-14
• /
• 2015

To build a high precision machine tool and increase its productivity, structural analysis needs to be carried out for vibration and stiffness of the machine tools before any detailed design. Therefore, in this paper, static and dynamic analysis is carried out to evaluate 8-axis multi tasking machining beds for automotive power train shafts; then, selection of an appropriate device is made for application to bed design. The results of structural and modal analysis confirmed the structural characteristics of the 8-axis multi tasking machine for automotive power train shaft beds: and the second shape bed is the safest is considered secure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.6
• /
• pp.683-691
• /
• 2010

In this paper, using an adjoint variable method, we develop a design sensitivity analysis(DSA) method applicable to heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume respectively. Through several numerical examples, the developed DSA method is verified to yield very accurate sensitivity results compared with finite difference ones, requiring less than 0.25% of CPU time for the finite differencing. Also, the topology optimization yields physical meaningful results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.604-610
• /
• 2018

Recently, due to the rapid growth of the leisure industry, demand for small-scale flotation and mooring pontoon platforms has been increasing rapidly. Standard rules for the design and structural safety of such structures have become necessary. This paper provides criteria that can be referenced when designing pontoon platforms, and also introduces structural safety evaluation procedures. In this study, the structural safety and stability of a 15-meter pontoon platform were investigated through structural design and finite element analysis. For platforms of less than 10 meters in length, a simple structural calculation can be used, but for platforms over 10 meters, a detailed structural strength review must be considered to meet safety guidelines defined in existing regulations. The structural strength of the initial design was examined and its structural safety was verified. For future research, it is an evaluative system was developed that can be used to examine the various loading conditions during design.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.274-278
• /
• 2015

There are different kinds of aircrafts, such as conventional airplane, rotorcraft, fighter, and unmanned aerial vehicle. Their shape and feature are dependent upon their assigned mission. One of the fundamental analyses during the design of the aircraft is the structural analysis. The structural analysis becomes more complicated and needs more computations because of the on-going complex aircrafts' structure. In order for efficiency in the structural analysis, a simplified approach, such as equivalent beam or plate model, is preferred. However, it is not clear which analysis will be appropriate to analyze the realistic configuration, i.e., an equivalent beam or plate analysis for an aircraft wing. It is necessary to assess the boundary between the one-dimensional beam analysis and the two-dimensional plate theory for an accurate structural analysis. Thus, in this paper, the static structural analysis results obtained by EDISON solvers were compared with the three-dimesional results obtained from MSC NASTRAN. Before that, EDISON program was verified by comparing the results with those from MSC NASTRAN program and analytic solution.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2010

An integrated machining center is developed for high precision and productivity manufacturing. The developed machine is composed of the high precision spindle using ball bearings, the high stiffness bed and the three axis CNC controller with the high resolution AC servo motor. In this paper, structural and modal analysis for the developed machine are carried out to check the design criteria of machine. The analysis is carried out by FEM simulation with using the commercial software, CATIA V5, ANSYS and ARMD. The simulation model of machine is made by shell and solid finite elements. This study also presents the measurement system on the modal analysis of an integrated machining center. The weak part of the machine is found by the analytical evaluation. The results provide with the structural modification data for good dynamic behaviors. And the safety of machine is confirmed by the modal analysis of modified machine design. As this study results can be trustworthy with the analysis of ANSYS and CATIA, integrated machining center can be successfully developed.