• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.585-595
• /
• 2007

Representative impacts and effectiveness of surface meteorological observation data assimilation were examined in order to use wind resources estimation around southern coastal area of the Korean Peninsula. The data used in study are observational wind and temperature data at 5 and 41 sites of Regional Meteorological Offices and Automatical Weather Systems, respectively. Observation wind speed data tends to show small effective radius with limited area. Especially assimilation impacts of data observed at peninsula type sites like Yeosu play only around the inside of the peninsula. This limited effective radius for wind speed is caused by the strong correlation between topography and wind speed. And the efficient radius for surface air temperature is larger than that of wind. Data assimilation for observational air temperature is useful to increase the accuracy of wind energy estimation. However assimilation of wind data requires special care in its application due to high sensitivity of topographical complexity.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.441-451
• /
• 1996

The surface meteorological and upper layer meteorological observation carried out to investigate influences of sea breeze effect on lower layer atmosphere at Gori nuclear power plant for 29∼30 July, 1996. According to surface meteorological data, the inflow of sea breeze was occurred 11:30 on 29 July, 10:30-on 30 July, respectively, at observation site. And the meteorological tower data showed that wind direction of sea breeze was identified as south-westerly, and wind speed of 58 m was 2 times stronger than that of 10 m. It is notworthy that surface inversion layer which built from the night time to daybreak of next day was not broken off by seab reeze's inflow for daytime, and strong inversion layer observed at 47∼243 m with moderately stable class (F) by URC. It was found that strong stable layer of potential temperature appeared at that layer, maximum relative humidity observed at the bottom of inversion layer and maximum mixing ratio observed in the low of inversion layer.

• 대한토목학회논문집
• /
• 제30권6B호
• /
• pp.617-625
• /
• 2010

풍속의 세제곱에 비례하는 풍력발전기의 전기발전량을 효과적으로 증대시키기 위해서는, 풍속이 강한 부지 선정이 중요하다. 일반적으로 내륙지역보다 풍속이 강한 연안지역에 풍력발전기를 설치하는 것이 바람직하다. 또, 해상풍력개발은 풍력발전기의 중요한 단점 중 하나인 소음 문제를 해결할 수 있는 방법으로 기대된다. 풍력개발 사업을 실행하는 과정에서, 어떤 지역의 풍력발전 가능성을 미리 파악하는 것은 풍력발전의 최적지를 선정하는데 있어서 중요한 요소들 중 하나이다. 본 연구는 기상청이 10년간 관측한 제주도 14개 지역의 풍향 및 풍속데이터를 가지고 제주 연안지역의 풍력발전 가능성에 대해 검토하였다. 풍력발전기의 설치높이를 80 m로 가정하고 풍속데이터를 보정하였으며, 이 값을 가지고 풍력에너지 밀도와 연간 풍력에너지량을 산출하였다. 그리고 모든 관측지점의 연간 전기발전량과 에너지취득률은 3,000 KW 풍력발전기에 관한 정보를 이용하여 산출되었다.

• 한국방재학회 논문집
• /
• 제9권4호
• /
• pp.37-44
• /
• 2009

본 연구에서는 1970년부터 2008년까지 연중 강풍 발생이 많은 지역인 군산, 목포, 여수, 완도에서 관측된 시간별 평균 바람자료를 이용하여 원인별 강풍발생특성을 분석하였다. 기상청 강풍주의보 기준인 13.9 m/s 이상인 바람을 강풍으로 정의하였다. 강풍 발생 원인을 태풍, 겨울 계절풍, 전선풍으로 구분하였다. 태풍의 경우 관측지점 상륙을 전후로 급격한 풍향 및 풍속의 변화를 나타냈고, 겨울 계절풍의 경우에는 북서풍 계열이 우세하며 풍속의 주기성을 보였다. 전선풍은 전선의 위치에 따라 관측지점의 풍향이 남서풍 계열에서 북서풍 계열로 변화하였다. 강풍의 발생빈도는 군산, 목포, 여수, 완도의 순이었고, 발생 원인별로 겨울 계절풍은 군산과 목포, 완도에 가장 영향이 크고, 태풍의 영향이 가장 적었으며, 여수는 태풍에 의한 영향이 가장 많고 겨울 계절풍의 영향이 가장 적었다. 지구온난화와 연관된 강한 태풍의 발생은 매년 태풍의 수가 일정함에도 불구하고 강풍 발생빈도를 증가시켰으며, 겨울 계절풍과 전선풍에 의한 빈도는 점차 감소하는 경향을 보였다. 강풍의 지속시간의 결과에서는 각 발생원인 모두 1시간 지속시간의 비율이 가장 높고, 시간이 증가할수록 빈도는 감소하였다. 이러한 결과는 각 지점의 지리적 위치에 의한 영향이 크게 반영되어 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.557-560
• /
• 2009

When we urgently need to develop and supply an alternative energy, wind power is growing with much interest because it has relative low cost of power and area of tower. To estimate the wind power resource, it is necessary to make an observation first. Although the large wind falm and resources are near coast and mountain area, the wind energy in urban area has the strong thing of direct access to power generator. In this study, we estimate the probability of wind energy above urban area using SODAR data, which is located at the top of the tall building (140m).

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.37-42
• /
• 2003

We have analyzed the characteristics of the sea surface winds and wind waves near the Korean marginal seas on the basis of prediction results of the sea surface winds from MM5/KMA model, which is being used for the operation system at the Korea Meteorological observation buoy data to verify the model results during Typhoon events. The correlation coefficients between the models and observation data reach up to about 95％, supporting that these models satisfactorily simulate the sea surface winds and wave heights even at the coastal regions. Based on these verification results, we have carried out numerical experiments about the wave modulation. When there exist an opposite strong current for the propagation direction of the waves or wind direction, wave height and length gets higher and shorter, and vice versa. It is proved that these modulations of wave parameters are well generated when wind speed is relatively week.

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.640-652
• /
• 2007

The MM5, RAMS and WRF, meteorological models have provided the dynamical parameters as inputs to air quality model. A major content of this study is that significant characteristics of three models for high-ozone occurrence analyze for surface wind and air temperature fields and compare with observation data in Seoul metropolitan area. An analysis of air temperature field revealed that location of core in high temperature of MM5 and WRF differed from that of RAMS. MM5 and WRF indicated high temperature in Seoul but RAMS represented it on the outskirts of Seoul. MM5 and WRF were underestimated maximum temperature during daytime but RAMS simulated similar value with observation data. Surface wind field with three models, it was shown many differences at horizontal distribution of wind direction. RAMS indicated weak wind speed in land and strong sea breeze at coastal areas than MM5 and WRF. However wind speed simulated by three model were overestimated during both daytime and nighttime.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.498-500
• /
• 2009

When we urgently need to develop and supply an alternative energy, wind power is growing with much interest because it has relative low cost for generating power and small area for wind turbine. To estimate the wind power resource, it is necessary to make an observation first. Although the large wind farm and resources are near coast and mountain area, the wind energy in urban area has the strong thing of direct access to power generator. In this study, we estimate the probability of wind energy in urban mountain area using A2C (Atmospheric to CFD) model, which is used for horizontally urban scale phenomena. In the steady state results, the site C is most suitable for wind power in the point of the only wind speed. But, estimating the TKE and vertical wind shear, the site B is showing the better results than the site C.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.633-637
• /
• 1999

A series of meterological observation using automation weather station(AWS) carried out to investigate characteristics of nocturnal meteorological parameters for 16~17 June 1998 at Buljeongdong mountain slope, Kyungbuk. Dry temperature at valley was lower than mountain because of high lapse rate at valley, so the strong inversion layer occurrenced at mountain slope for nighttime. Contrary of dry temperature, relative humidity of valley was higher than mountain for nighttime. Wind speed at valley from sunset to next day morning was lower than mountain, but that of valley after sunrise was higher than mountain. Wind direction at valley for all observation time were southeasterlies(SE), that of mountain for nighttime were northeasterlies(NE) or northnorthwesterlies(NNW), and that of mountain after sunrise were irregular. Vapor pressure at valley for all observation time was higher mountain, particularly the difference was high for nighttime.

• Wind and Structures
• /
• 제5권5호
• /
• pp.393-406
• /
• 2002

Aerodynamic pressures and forces were measured on a model of a solar panel containing six slender, parallel modules. Of particular importance to system design is the aerodynamically induced torque. The peak system torque was generally observed to occur at approach wind angles near the diagonals of the panel ($45^{\circ}$, $135^{\circ}$, $225^{\circ}$ and $315^{\circ}$) although large loads also occurred at $270^{\circ}$, where wind is in the plane of the panel, perpendicular to the individual modules. In this case, there was strong vortex shedding from the in-line modules, due to the observation that the module spacing was near the critical value for wake buffeting. The largest loads, however, occurred at a wind angle where there was limited vortex shedding ($330^{\circ}$). In this case, the bulk of the fluctuating torque came from turbulent velocity fluctuations, which acted in a quasi-steady sense, in the oncoming flow. A simple, quasi-steady, model for determining the peak system torque coefficient was developed.