• 동력기계공학회지
• /
• 제18권5호
• /
• pp.28-34
• /
• 2014

This paper deals with optimum PI controller design using genetic algorithm to improve control performance and robustness for an oil cooler system. The optimum PI gain was found to minimize an object function, integrated absolute error, and to satisfy control design specifications such as overshoot and settling time based on practical transfer function of the oil cooler system. The control performance and robustness were investigated by comparing indicial responses and Bode diagram analysis with respect to three kinds of PI gains obtained from different gain decision manners. Moreover, the robustness against to input disturbances, sinusoidal wave form and abrupt single pulse, was evaluated. The computer simulation results showed that the suggested optimum gain can establish desirable control performance and strong robustness with easy design process.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.89-94
• /
• 2001

This paper presents an approach to leak detection and location of gas pipelines based on a strong tracking filter(STF). The STF has strong robustness against model uncertainties, which will deteriorate the performance of the extended Kalman filter. Hence, much faster and more accurate leak detection and location has been obtained. Computer simulation results demonstrate the effective-ness of the proposed approach.

• 한국음향학회지
• /
• 제38권6호
• /
• pp.716-723
• /
• 2019

음악 검색을 서비스하기 위해서는 핑거프린트 정합 정확도가 중요하다. 본 논문에서는 파워 가중치를 이용하여 오디오 핑거프린트 정합 성능을 제고하고자 한다. 파워 가중치는 핑거프린트 비트 추출 과정에서 유실되는 정보를 이용하여 구한 핑거프린트 비트의 예측 강인도이다. 기존 파워 마스크 방법은 저장 공간을 줄이기 위해서 이진화를 통해서 강인한 비트와 연약한 비트로 나눈다. 본 논문에서는 정합 성능을 향상시키기 위해서 실수 값 형태의 파워 가중치를 사용하는 방법을 제안한다. 또한 시간축 방향으로 연관성이 강한 파워 가중치의 특성을 이용하여 압축하여 저장공간을 줄일 수 있도록 한다. 공개된 음악 데이터셋에서 실험을 수행하여, 제안된 파워 웨이트가 오디오 핑거프린트 정합성능을 제고함을 확인하였다.

• Journal of Information Processing Systems
• /
• 제13권2호
• /
• pp.256-267
• /
• 2017

An active research area in computer vision, stereo matching is aimed at obtaining three-dimensional (3D) information from a stereo image pair captured by a stereo camera. To extract accurate 3D information, a number of studies have examined stereo matching algorithms that employ adaptive support weight. Among them, the adaptive census transform (ACT) algorithm has yielded a relatively strong matching capability. The drawbacks of the ACT, however, are that it produces low matching accuracy at the border of an object and is vulnerable to noise. To mitigate these drawbacks, this paper proposes and analyzes the features of an improved stereo matching algorithm that not only enhances matching accuracy but also is also robust to noise. The proposed algorithm, based on the ACT, adopts the truncated absolute difference and the multiple sparse windows method. The experimental results show that compared to the ACT, the proposed algorithm reduces the average error rate of depth maps on Middlebury dataset images by as much as 2% and that is has a strong robustness to noise.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2016년도 추계학술대회
• /
• pp.82-84
• /
• 2016

We propose a new reliable SVD-based watermarking scheme having high fidelity and strong robustness with no false-positive problem. Each column of the principal component of a watermark image is embedded into singular values of LL, LH, HL and HH sub-bands of cover image with different scale factors. Each scale factor is optimized by trading-off fidelity and robustness using Differential Evolution (DE) algorithm. The proposed scheme improves fidelity and robustness of existing reliable SVD based watermarking schemes without any false-positive problem. Index Terms - watermarking, reliable SVD, DWT, principal component, Differential Evolution.

• 전기학회논문지P
• /
• 제55권2호
• /
• pp.78-82
• /
• 2006

This paper is proposed genetic algorithm tuning(GAT) control)or for high performance of induction motor drive. We employed GA to the classical PI controller. The approach having ability for global optimization and with good robustness, is expected to overcome some weakness of conventional approaches and to be more acceptable for industrial practices. The control performance of the GAT PI controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1434-1447
• /
• 2018

The control design of inductive power transfer (IPT) systems has attracted a lot of attention in the field of wireless power transmission. Due to the high-order resonant networks and multiple loads in IPT systems, a simplified model of an IPT system is preferred for analysis and control design, and a controller with strong robustness is required. Hence, an active disturbance rejection control (ADRC) for IPT systems is proposed in this paper. To realize the employment of ADRC, firstly a small-signal model of an LC series-compensative IPT system is derived based on generalized state-space averaging (GSSA), then the ADRC is implemented in the designed IPT system. The ADRC not only provides superior robustness to unknown internal and external disturbances, but also requires few knowledge of the IPT system. Due to the convenient realization of ADRC, the designed IPT system retains its simple structure without any additional circuits. Finally, a frequency domain analysis and experimental results have validated the effectiveness of the employed ADRC, especially its robustness in the presence of frequency drifts and other common disturbances.

• Journal of the Korean Data and Information Science Society
• /
• 제26권3호
• /
• pp.549-559
• /
• 2015

MDPDE는 이상치에 강건한 성질을 가진 추정량으로써 최대우도추정량의 대안으로 많은 연구자들에 의해 연구되어 왔다. MDPDE는 조율모수에 따라 성질이 변하게 되는데, 로버스트성과 점근효율성이 서로 상충하는 현상으로 인해 최적의 조율모수를 선택하는 것은 쉽지 않다. 본 연구에서는 MDPDE의 최적의 조율모수를 선택하는 방법으로 Fujisawa와 Eguchi (2006)가 제시한 방법과 Warwick (2006)이 제시한 방법을 소개하고, 모의실험을 통해 비교분석하였다. 연구 결과 Warwick (2006)의 방법은 특정한 경우 매우 작은 조율모수를 선택하게 될 수도 있다는 사실을 알 수 있었는데, 같은 경우에 Fujisawa와 Eguchi (2006)의 방법은 이러한 현상을 보이지 않았다. 따라서, Fujisawa와 Eguchi (2006)의 방법이 범용적으로 사용하기에 적절하다고 판단된다.

• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.106-113
• /
• 1997

A new algorithm based upon TDC (Time Delay Control) is proposed to improve the robustness of TDC performance in systems where the stick-slip friction is strong. Experiments were performed at the different levels of friction. The reponses of the TDC and the modified TDC were compared each other, and against those of a PID controller with an anti-windup. The results show that the TDC and the modified TDC equally perform better than the PID, and that the modified TDC performs consistently well even with variations in the friction level while the TDC does not.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.402-410
• /
• 2019

This paper deals with the disturbance observer (DOB) based sliding mode control (SMC) for a DC motor to control motor rotating speed precisely and to ensure strong robustness against disturbance including load torque and parameter variation. The reason of steady state error in speed on conventional SMC without DOB is analyzed in detail. Especially, the suggested DOB is designed to prevent measuring noise and harmonics caused by derivative operation on rotating speed. The control performance of the DOB based SMC is evaluated by the various simulations. The simulation results showed that the DOB based SMC had more robust performance than the SMC system without DOB. Especially, precise speed control was possible even though motor parameter variation and load torque was added to the system.