• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.381-385
• /
• 2010

An aging Society solitary life old mans are increasing. The nurses have to visit old mans and must confirm their disease, because they do not act well. It is very difficult to take care old man, because the number of Nurses are small. This problem is solved by collection of data about condition of old mans from long distance. Data communication with Ethernet have benefit to collection of measurement of old man's condition. The Data storage system an long distance place are storaged data and after several day data was transmitted to the DB over the Ethernet. For Miniaturization of such system the system must be OS-less Embedded Ethernet Server system. Such system manages the file management system only with H/W. The Storage device is used SD-card. SD Card is small size and operates with small power. By using 512MB sd memory card, it is possible to storage during 5~6 years, 10 byte of temperature value per second. In this paper, we make a Embedded Ethernet Server using W3100A, Atmega128 MCU and data stroage device using SD-Card. This system operates with O/S-less Embedded Ethernet Server. We talk about file System, Storage and Ethernet. We explained about MCU Atmega128, Interface between LAN LSIand W3100A, Interface between W3100A and Phyceiver RTL8201, data I/O between MCU and SD-Card and File System. We shows the experiment device and result of monitoring.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.204-214
• /
• 2005

This study compared the microtensile bond strength (${\mu}$TBS) and microscopic change of two 2-step and two 1-step self-etching adhesives to dentin according to storage times in distilled water. Occlusal dentin was exposed in 48 human molars. They were divided to four groups by different adhesives: SE Bond group (Clearfil SE Bond), AdheSE group (AdheSE). Adper group (Adper Prompt L-Pop), and Xeno group (Xeno III) . Each group was stored in 37$^{\circ}C$ distilled water for 1, 15, and 30 days. Resin-bonded specimens were sectioned into beams and subjected to ${\mu}$TBS testing with a crosshead speed of 1 mm/minute. For SEM observation, one specimen was selected and sectioned in each group after each stroage time. Resin-dentin interface was observed under FE-SEM. In all storage times, mean ${\mu}$TBS of SE group was significantly higher than those of other groups (p < 0.05). There was no significant difference between mean ${\mu}$TBS of SE group and AdheSE group among all storage times, but significant difference between 1- and 30-day storage in mean y${\mu}$TBS of Adper group and Xeno group (p > 0.05). For 1-and 15-day storage, all groups showed the close adaptation between resin-dentin interfaces. For 30-day storage, resin-dentin interfaces showed wide gap in Adper group and separate pattern in Xeno III group.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.45-54
• /
• 1986

A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.681-695
• /
• 2019

A Transient Storage Model (TSM) is one of the most widely used model accounting for complex solute transport in natural river to understanding natural river properties with four TSM key parameters. The TSM parameters are estimated via inverse modeling. Parameter estimation of the TSM is carried out by solving optimization problem about finding best fitted simulation curve with measured curve obtained from tracer test. Several studies have reported uncertainty in parameter estimation from non-convexity of the problem. In this study, we assessed best combination of optimization method and objective function for TSM parameter estimation using Cheong-mi Creek tracer test data. In order to find best optimization setting guaranteeing convergence and speed, Evolutionary Algorithm (EA) based global optimization methods, such as CCE of SCE-UA and MCCE of SP-UCI, and error based objective functions were compared, using Shuffled Complex-Self Adaptive Hybrid EvoLution (SC-SAHEL). Overall results showed that multi-EA SC-SAHEL with Percent Mean Squared Error (PMSE) objective function is the best optimization setting which is fastest and stable method in convergence.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

• Journal of Environmental Health Sciences
• /
• v.17 no.2
• /
• pp.78-94
• /
• 1991

The purpose of this study is to research the actual conditions of industrial accident patients and to produce worker satisfaction and a rational and effective counter measure pain. Direct interviews with 179 cases (in and out patients) were carried out during a three month period from April to July 1990, at six hospitals two general hospitals Sun Lin and Sung Mo in Po Hang, and four general hospitals in Taegu Kyung Pook University Hospital, Dong San Medical Center, Young Nam Medical Center and Catholic Hospital. The results of this study are summarized as follows: 1. Among the 179 cases, 51.6 % were male and 48.4 % were female. The two largest age groups were 30~39, 31.8 % and 20~29, 27.4 %. Among the 179 cases, 51.6% were married, the largest family number was 2 to 3, 41.1% and 4 to 5, 25.6%. Educationally, graduation from high school was the largest group, 46.4% among the patients, followed by middle school and primary school. The largest group income level was from 40~69만원, 45.2%. The largest group of patients who worked over 50 hrs. a week was 52.0%. The largest group of patients who worked less than 1 year was 44.7%, of the patients in work places of less than 100 people, 60.3% were injured and in work places of 100~299 people, 20.1% were injured. In manufacturing, the lagest group injured was 55.3%, the next group was transport, stroage, communication. The largest group of production workers injured was 40.2%. 2. The cause of injury in the largest group was facility problems, 33.5%. The next group was unsafe habits, 30.2% a lack of safety knowledge, 17.9% and insufficient supervision, 12.3%. The 30~39 year age group was head the highest number of injuries, 40.4% work places with more than 10 yeras of work, 44.4% work palces with more than 1000 people, 56.3% and mining accidents, 80.0%. Among these groups the highest cause of injury was due to facility problems. 3. The accident pattern showed machinery injuries 28.5% as the largest group, followed by falls & falling objects 17.3%, fire & electric 15.1%, struke by an object 14.5%, followed by overaction and vehicular accidents. The accident pattern showed 46.4 % among workers over the 50 year age group, workers in the 5~10 year group, 50.0 % places employing more than 1000 workers, 35.3 % : construction 73.7%, and construction workers 57.1%, among these fall & falling objects caused the greatest number of injuries. 4. The largest group of injuries was fractures 54.8%, trauma 14.5%, amputation 11.7%, open wound, and burns. The largest number of fractures occurred in people in the 30~39 year age group, 63.2 % over 10 years of work, 55.6% in work places of 300~400 people, 63.6% construction 63.2% and general workers 57.2 %. 5. The largest group of injuries was upper extremity 45.3%, lower extremity 24.0%, trunk 18.5 % and head or neck 12.2%. Of these groups, upper extremity injuries were the highest in those less 20 years old 75.0%, less than 1 years of work 59.5%, in work places of 500~999 people 60.0%, manufacturing 56.6 % and production workers 55.6%. 6. Periods of injury showed 34 people injured in September, to be the largest followed by October, 32 August, 22 people July, 19 people and the lowest December, 2 people. During the week, Friday had the largest group injured, 35 people followed by Saturday, 26 people and the lowest was Wednesday, 17 people, During the day 1400 hours had the largest group injured, 38 people followed by 800 hours, 31 people. 7. On a basis of 5 as the highest mark, the average, according to worker satisfaction showed facility safety 3.55, work environment 3.47, income 3.44, job 3.21 and treatment 2.98. 8. The correlation between general characteristics and injury showed that age was directly correlated to the duration of work(r=.2591) p<0.01, age was directly correlated to industry (r=2311) p<0.01, and the duration was directly correlated to occupation(r =.4372) p<0.001.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.479-485
• /
• 2001

A study of the levels of phthalate and adipate esters, which are suspected as endocrine disruptors, in food packaging wraps and packaged foods were carried out. Among 11 wrap samples, 8 household wraps purchased at retail markets were polyvinyl chloride(PVC) and polyethylene(PE), while 3 commercial wraps at wholesale markets were PVC. All of 51 selected food samples, such as 12 samples of vegetable, 11 samples of fruit, 6 samples of bread and rice cake, 4 samples of meat and poultry, 4 samples of fish and 14 samples of side dish, packaged with commercial PVC wraps containing adipate esters were purchased at retail markets. The level of di-(2-ethylhexyl) adipate(DEHA) and diisononyl adipate(DINA) was from 2.2 to 17.9% and from 4.2 to 22.3% in household PVC wraps, respectively. In the commercial PVC wraps, the level of DEHA showed from 18.3 to 22.5%, while other phthalate esters were not detected. The phthalate and adipate esters were not detected in PE wraps. The level of DEHA in packaged foods, such as vegetable, fruit, bread and rice cake, meat and poultry, fish and side dish, were determined up to $8.2\;{\mu}g/cm^2,\;17.4\;{\mu}g/cm^2,\;31.0{\mu}g/cm^2,\;8.3\;{\mu}g/cm^2,\;2.1\;{\mu}g/cm^2$ and $92.3\;{\mu}g/cm^2$, respectively. The results suggested that migration levels of DEHA in foods were closely related to the fat content, wrapping condition of food and stroage time and temperature.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.117-120
• /
• 2011

Purpose: There are 3 warnings for Glucagon tests. First, EDTA tubes that already contain Aprotinin must be used for plasma collection. Second, for freezer storage of centrifuged plasma, glass tubes must be used. Last, glass tubes must be used for testing procedure. So we compared the glucagon results of next 3 situation to those of control group. First, We compared to results by tubes without Aprotinin and with aprotinin. Second, we compared to results by tubes(plastic vs glass) for plasma storage. Third, we compared to results by tubes(plastic vs glass) for testing. We tried to evaluate the results of the 3 different condition. Materials and Methods: 40 healthy adults were studied with normal results on the general medical check up and laboratory tests. We compared the results of 3 different condition belows: Blood were collected in EDTA tube containing aprotinin and plasma was stored in the glass tube for 3 days in a freezer and results were obtained by tests in the glass tubes. Results from EDTA plasma without aprotinin, results from platic tubes for freezer stroage, results from plastic tube when testing. Simple linear regression analysis and paired t-test using SPSS were done for statistical analysis. Commercial glucagon kit(RIA-method)which made by Siemens company were used. Results: Correlation coefficient between results of EDTA tubes with Aprotinin vs without Aprotinin was r=0.783 (p=0.064). Result of specimen in plastic tubes stored 3 days in a freezer showed lower value compared to those in glass tube(r=0.979, p=0.005). Also, results of testing in plastic tubes showed lower values than those testing in glass tubes. (r=0.754, p<0.001). Conclusion: It is recommended for glucagon determination to use EDTA tube with Aprotinin which is a inhibitor of protein breakdown enzyme. Results of plastic tube when storage and testing showed lower value than those of glass tubes, so it is recommended to store and test in glass tubes.