• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.28-36
• /
• 2005

A hydrometallurgical process to leach cobalt from the waste cathodic active material, $LiCoO_{2}$, and subsequently to separate it by solvent extraction was developed. The optimum leaching conditions for high recovery of colbalt and lithium were obtained: 2.0 M sulfuric acid, 5 $vol.\%$ hydrogen peroxide, $75^{\circ}C$ leaching temperature, 30 minutes leaching time and an initial pulp density of 100 g/L. The respective leaching efficiencies for Co and Li were $93\%$ and $94.5\%$. About $85\%$ Co was extracted from the sulfuric acid leach liquor containing 44.72 g/L Co and 5.43 g/L Li, using 1.5 M Cyanex272 as an extractant at the initial pH 5.0 and in organic to aqueous phase ratio of 1.6:1 under the single stage extraction conditions. The Co in the raraffinate was completely extracted by 0.5 M Na-Cyanex272 at the inital pH 5.0, and an organic to aqueous phase ratio of 1;1. The cobalt sulfate solution of higher than $99.99\%$ purity could be recovered from waste $LiCoO_{2}$, using a series of hydrometallurgical processes: sulfuric acid leaching of waste $LiCoO_{2}$- solvent extraction of Co by Na-Cyanex 271 - scrubbing of Li by sodium carbonate solution - stripping of Co by sulfuric acid solution.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.90-94
• /
• 2006

The waste solution discharged from the LCD manufacturing process contains acids like nitric, acetic and phosphoric acid and metal ions such as Al, Mo and other impurities. It is important to removal of impurities to tess than 1ppm in phosphoric acid to reuse as an etchant because the residual impurities even in sub-ppm concentration in semiconductor materials play a major role on the electronic properties. In this study, we have been clearly established that a mixed system of solvent extraction, diffusion dialysis and ion-exchange technique, which made individually the most of characteristics is developed to commercialize in an efficient system for recovering the high-purity phosphoric acid. By applying vacuum evaporation, the yield of the process are almost 99% removal of nitric acid and acetic acid was achieved. And by applying the solvent extraction method with tri-octyl phosphate(TOP) as an extractant, the removal of acetic and nitric acid from the acid mixture was achieved effectively at the ratio O/A=1/3 with four stages and the stripping of nitric acid from organic phase is attained at a ration of O/A=1 with six stages by distilled water. About 97% and 76% removal of Al and Mo were achieved by diffusion dialysis. Essentially complete less than 1ppm removal of Al, Mo by using ion exchange ion resin and purification of the phosphoric acid was obtain.

• Journal of Chest Surgery
• /
• v.40 no.2 s.271
• /
• pp.97-102
• /
• 2007

Background: Endovenous laser treatment has recently been introduced as a less invasive technique, with many good results reported, A 980-nm diode laser was used on the great saphenous vein (GSV) occlusions in patients with varicose veins, due to GSV reflux, and the therapeutic effects analyzed. Material and Method: Between September 2003 and February 2006, 238 patients (332 cases) with GSV reflux underwent endovenous laser treatment with a 980-nm diode laser. Operative procedures were simultaneous endovenous laser treatment and ambulatory phlebectomy. The preoperative clinical findings, postoperative complications and postoperative duplex US follow up results at 1 and 3 months were reviewed. Result: Postoperative complications were ecchymosis in almost cases, paresthesia 68 cases (20.5%) and skin burn in 3 cases (0.9%). Follow up duplex US revealed 26 and 10 cases at 1 and 3 months of GSV reflux or partial recanalization, with therapeutic success rates of 91.3 and 87.9%, respectively. Conclusion: The treatment of GSV occlusion with an endovenous laser is less invasive than traditional GSV stripping, but relatively high recanalization was experienced, possibly due to inadequate laser power, laser fiber pullback speed or an extremely dilated GSV. However, continuous attempts will be required to reduce the recanalization after the procedure, with accurate follow up using duplex US.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.70-72
• /
• 1998

1. 서론 : 최근에 폐수나 지하수 및 음용수에 존재하는 휘발성 유기화합물(Volatile Prganic Compound, VOC)는 심각한 환경오염이 주범이 되고 있다. 이러한 문제를 해결하는 방법으로 흡착, 증류, air stripping 등의 여러 가지 분리기술이 제시되어 왔다. 그러나 전통적인 방법들은 분리된 오염물질이 제2의 상으로 전이된다는 점에서 또 다른 분리공정을 필요로 하는 단점을 지니고 있다. 이에 반해 투과증발공정은 추가적인 분리과정이 없이 효율적으로 오염된 물속의 유기용매를 제거한다는 점에서 많은 관심을 모으고 있다. 이미 알려진 이러한 VOC 제거에는 소수성이면서 고무상인 고분자가 우수한 특성을 가지는 것으로 밝혀졌고 그 중에서 실록산계 고분자가 아주 효과적인 것으로 알려져 있다. 그러나 이러한 실록산계 고분자는 기계적 강도가 약하여 필름의 박막형성능력이 떨어지는 것으로 알려져 있어 이러한 단점을 보완하기 위해 가교구조의 도입이나 공중합체의 구조를 도입하는 연구가 많이 수행되어 왔다. 이러한 연구의 한 방법으로 실록산-아미드공중합체를 이용하여 투과증발에 적용한 연구는 수행되어 왔다. 이들의 제막방법으로 주로 실록산다이아민/방향족다이아민의 비를 달리하거나 실록산다이아민의 분자량의 변화를 달리하면서 실록산-이미드 블록 또는 그래프트중합체를 제조하는 방법을 사용하였다. 이 실험에서는 주로 실록산-이미드의 비율이 낮아지면 유기용매의 선택성에서 물의 선택성으로 바뀌는 percolation point가 관찰되며 이것은 실록산-이미드의 비율이 낮을수록 물속의 유기용매의 제거에 유리하다는 것을 보여준다. 이에 따라 실록산다이아민과 다이안하이드라이드만을 사용한 실록산이미드막이 추천되나 여기에 대한 투과특성연구는 전혀 이루어지지 않았다.정육점이었고 백화점과 재래닭 사육장에서 직접구입도 하고 있었다. 구입 동기는 가족들이 좋아하고 영양가를 생각한다가 62%였으며 구입정보는 주위사람의 권유로 구입하고 있었다. $\bigcirc$ 구입할 때 중점적으로 살펴보는 사항은 신선도와 순수재래종 여부, 위생상태였다. 한편 소비자가 언제나 구입할 수 없다는 의견이 85.2%나 되어 원활한 공급과 시장조성이 아직 정착되지 않고 있었다. $\bigcirc$ 현재 유통되고 있는 재래종닭은 소비자 대부분이 잡종으로 인식하고 있었으며, 재래종과 일반육계와의 구별은 깃털색, 피부색, 정강이색등 외관상으로 구별하고 있었다. 체중에 대한 반응은 너무 작다는 의견이었고, 식품으로의 인식도는 비교적 고급식품으로 인식하고 있다. $\bigcirc$ 재래종닭고기의 브랜드화에 대한 견해는 젊고 소득이 높은 계층에서 브랜드화의 필요성을 강조하고 있다. $\bigcirc$ 재래종달걀의 소비형태는 대부분의 소비자가 좋아하였으나 아직 먹어보지 못한 응답자가 많았다. 재래종달걀의 맛에 대해서는 고소하고 독특하여 차별성을 느끼고 있었다. $\bigcirc$ 재래종달걀의 구입장소는 계란판매점(축협.농협), 슈퍼, 백화점, 재래닭 사육 농장등 다양하였으며 포장단위는 10개를 가장 선호하였고, 포장재료는 종이, 플라스틱, 짚의 순으로 좋아하였다. $\bigcirc$ 달걀의 가격은 200원정도를 적정하다고 하였으며, 크기는 (평균 52g)는 가장 적당하다고 인식하고 있으며, 난각색은 대부분의 응답자가 갈색을 선호하였다. $\bigcirc$ 재래종달걀의 구입시 애로사항은 믿을수 없고, 구입장소를 몰라서, 값

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.359-365
• /
• 2021

GEO-KOMPSAT-2A (GK2A) AMI (Advanced Meteorological Imager) Best Detector Select (BDS) map is pre-determined and uploaded before the satellite launch. After the launch, there is some possibility of a detector performance change driven by an abrupt temperature variation and thus the status of BDS map needs to be evaluated and updated if necessary. To investigate performance of entire elements of the detectors, AMI BDS analyses were conducted based on a technical note provided from the AMI vendor (L3HARRIS). The concept of the BDS analysis is to investigate the stability of signals from detectors while they are staring at targets (deep space and internal calibration target). For this purpose, Long Time Series (LTS) and Output Voltage vs. Bias Voltage (V-V) methods are used. The LTS for 30 secs and the V-V for two secs are spanned respectively for looking at the targets to compute noise components of detectors. To get the necessary data sets, these activities were conducted during the In-Orbit Test (IOT) period since a normal operation of AMI is stopped and special mission plans are commanded. With collected data sets during the GK2A IOT, AMI BDS map was intensively examined. It was found that about 1% of entire detector elements, which were evaluated at the ground test, showed characteristic changes and those degraded elements are replaced by alternative best ones. The stripping effects on AMI raw images due to the BDS problem were clearly removed when the new BDS map was applied.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.119-128
• /
• 2019

About 300,000 tones of oyster shell are annually produced in Korea and, thus, a massive recycling plan is required. Many desulfurizing studies using oyster shells with chemical composition of $CaCO_3$ have been performed so far; however, most of them have focused on dry desulfurization. This study investigates the possibility of using oyster shells for wet desulfurization after calcination. For this, a simulated wet desulfurization facility of spray type was devised and compared the SOx-stripping characteristics of calcined oyster shell with those of limestone. The calcined oyster shell slurry indicate a better desulfurizability than the slurries of raw shell or limestone because the oyster shell transformed to a more reactive phase ($Ca(OH)_2$) by the calcination and hydration. Because of this reason, when the calcined oyster shell slurries were used, the reaction residue showed the higher gypsum ($CaSO_4{\cdot}2H_2O$) contents than any other cases. In the continuous desulfurization experiments, calcined oyster shell slurry showed a wider pH variation than limestone or raw oyster shell slurries, another clear indication of high reactivity of calcined oyster shells for $SO_2$ absorption. Our study also shows that the efficiency of wet desulfurization can be improved by the use of calcined oyster shells.

• Resources Recycling
• /
• v.28 no.2
• /
• pp.46-53
• /
• 2019

In this study, the extraction and reduction behavior of platinum group metals in a non-aqueous solvent based on ionic liquids was investigated in order to confirm a new extraction technology of platinum group metals. Platinum was selectively extracted using an ionic liquid $[C_4mim]PF_6$ from a mixed solution of $PdCl_2$, $PtCl_4$ and $RhCl_3$ dissolved with concentration ratio of 10:1:0.5 M. After stripping of the metals by 1 M $HNO_3$ solution, the platinum was preferentially reduced by aqueous electrolysis on gold electrode at -0.8 V (vs. Pt-QRE). The residual palladium and rhodium were transferred to ionic liquid of $[C_4mim]Cl$. The metallic palladium and rhodium could be sequentially reduced on gold and STS304 as working electrodes by non-aqueous electrolysis, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.36-44
• /
• 2019

Swallowing impairment is a frequent complication following stroke. The characteristics of swallowing impairment with stork patient can facilitate identification of individuals at risk of dysphagia would be of great helpful. The present study examined oropharyngeal swallowing impairment with subacute stroke patients using the Modified Barium Swallowing Impairment Profile(MBSImP). The 49 consecutive patients with the supratentorial stroke met inclusion criteria for the present study. A retrospective review was performed of patients who underwent the videofluoroscopic swallowing study(VFSS). Of Stroke patients, 95.9% exhibited abnormal function of lip closure. 98% and 57.1 % shown abnormal tongue function and lingual motion, respectively. Oral residue was present in 51% and delayed pharyngeal response was present in 89.9%. In addition, abnormal laryngeal and hyoid excursion was seen in 42.9% and 87.8%, respectively. Abnormal function of soft palate elevation was present in 18.4% and abnormal epiglottic movement was seen in 4.1%. 30.6% of 30.6% of these patients exhibited abnormal laryngeal closure. All of the stroke patients(100%) in this study exhibited abnormal pharyngeal stripping wave and pharyngoesophageal segment opening. Abnormal tongue base retraction and oral reside were present 91.8%, respectively. The results suggest that stroke patient is more likely to exhibit reduced swallowing functions including lip closure, tongue control, initiation of pharyngeal swallow, anterior hyoid motion, tongue base retraction, pharyngeal residue and pharyngoesophageal contraction. Therefore, these data could provide valid and precise information regarding physiological evidence to delineate symptoms of dysphagia in this stroke cohort. Future studies should explore the bolus effect in the swallowing impairment.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.57-66
• /
• 2021

In this study, we attempted to separate and recover Cu from low-grade copper ore by a hydrometallurgical process. The leaching sample obtained after crushing and sieving by 0.355 mm of low-grade copper ore contained 1.5% Cu, 4.7% Fe, 1.0% Mn, and 0.3% Zn. The Cu in the oxide ore was very well leached into sulfuric acid and 97% Cu leaching efficiency was achieved at 80℃ and 3 M sulfuric acid (H₂SO₄). From the leaching solution, Cu was separated by solvent extraction from Fe, Mn, and Zn using LIX984N. The separation tendency between Cu and other metals was confirmed through the distribution ratio and separation factor. By plotting the McCabe-Thiele Diagram, the optimum condition for recovering Cu is 5 vol.% LIX984N, 2-stage counter-current solvent extraction, and an O/A ratio of 0.5. Using this method, 99% of the Cu was extracted and a CuSO₄ solution was finally obtained that contained 1.6 g/L Cu after the stripping process using 2 M H₂SO₄.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.100-105
• /
• 2021

Recently, all-solid-state batteries have attracted much attention to improve safety of rechargeable lithium batteries, but the solid-state batteries of conductive ceramics or solid polymer electrolytes show poor electrochemical properties because of several problems such as high interfacial resistance and undesired reactions. To solve the problems of the reported all-solid-state batteries, a hybrid solid electrolyte is suggested, in this study, NASICON-type nanoparticle Li_1.5Al_0.5Ti_1.5P₃O₁₂ (LATP) conductive ceramic, PVdF-HFP, and a carbonate-based liquid electrolyte were composited to prepare a quasi-solid electrolyte. The hybrid solid electrolyte has a high voltage stability of 5.6 V and shows an suppress effect of lithium dendrite growth in the stripping-plating test. The LiNi_0.83Co_0.11Mn_0.06O₂ (NCM811)-based battery with the hybrid solid electrolyte exhibits a high discharge capacity of 241.5 mAh/g at a high charge-cut-off voltage of 4.8V and stable electrochemical reaction. The NCM811-based battery also shows 139.4 mAh/g discharge capacity without short circuit or explosion at 90℃. Therefore, the LATP-based hybrid solid electrolyte can be an effective solution to improve the safety and electrochemical properties of rechargeable lithium batteries.