• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.34-43
• /
• 1994

In order to improve thickness profile of cold rolled steel strip, a computer simulation and actual cold rolling experiments on a 4-high tandem cold mill were carried out. In this study, tapered barrel end at top work roll and incurved barrel body at bottom work roll were examined for reducing edge drop and threading of stripe. Also, the most effective stand of tandem cold mill and magnitude of optimal taper crown at several stand were investigated under a typical rolling condition. From actual rolling experiments, it was verified that thickness deviation over strip width could be improved up to 1.06% by applying tapered and incurved work roll only at the second and up to 0.89% by applying them at both the second and the third stand.

• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.528-534
• /
• 2016

The aim of this paper is to consider the effect of the manufacturing processes on corrosion and centerline cracking of ancient bronze spoons. The ancient bronze spoons in question were made by several steps of forging, in reheated condition with cast ingots. The manufacturing method is similar to that of the modern spoons. The investigations include observations from light and scanning electron microscopes of the microstructure in terms of the crack propagation. Cracks in the centerline are caused by solute segregation in the center-line region; this solute is solidified in the final stage of bronze spoon manufacture. Centerline cracking is also caused by ${\alpha}$ phase segregation, accompanied by forged overlapping along the longitudinal direction of the spoons. A vertical stripe with cracks along the centerline of the spoon's width is formed by folding in the wrought process. The overlapping area causes crack propagation with severe corrosion on the spoon surfaces over a period of a thousand years. The failure mechanisms of ancient bronze spoons may be similar to that of modern spoons, and the estimation of the failure mechanisms of ancient spoons can be appropriate to determine failure causes for such modern spoons.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.235-243
• /
• 2002

Theoretical analysis have been performed to design the high power semiconductor laser for an optical sensor at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest loss wavelength in optical fiber. The materials of active region and SCH were $Ln_{1-x}Ga_xAs_yP_{1-y}$. In order to use the light source of optical sensors, it has to satisfy wide spectral width and short coherence length. Therefore, in order to suppress lasing oscillation, we proposed laterally tilted PBH type with a window region. Also, tapered stripe structure was applied for high coupling efficiency into a single mode fiber. From these analyses, the devices of laterally tilted angled and bending structure were fabricated and their characteristics were measured. In the results of the measurement, the fabricated devices have sufficient output power and wide FWHM to apply to the light source of optical fiber sensors.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1100-1105
• /
• 1997

The verial black stripe is one of the defects in a chrge-coupled device(CCD). Vertical black stripes are caused by some signal chrges which fail to transport form the vertical CCD region to the horizontal one. The defective transport of signal charges orignates in the potential barrier with the narrow width effects in the verti-cal-horizintal interface stuccture. The vertical black stripes show up when the charge transfer dfficiency is less than 99.2% under the low illumination condition. In this research, we designed and developed a new vertical-horizontal interface structre of a delta type, thus marking it possible to eliminate the vertical black stripes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.57-65
• /
• 1995

The effects of device geometry and layout on high speed performance such as current gain outoff frequency(f$_{T}$) and maximum oscillation frequency(f$_{max}$) are of very improtant for the scaling-down of geterojunction bipolar transistors(HBT$_{s}$). In this paper AlGaAs/GaAs HBTs are fabricated by MBE epitaxial growth and conventional mesa process, and the experimental data of emitter-base geometru dependency of HBT performance are presented in order to provide the quantitative information for optimum device structure design. It is shown that f$_{T}$ and f$_{max}$ are inversely proportional to the emiter stripe width, while the low emitter perimeter/area ratio is better to f$_{T}$ and worse ot f$_{max}$. It is also demonstrated the f$_{T}$ and f$_{max}$ are highly improved by the emitter-base spacing reduction resulting in less parsitic effects. As the result f$_{T}$ of 42GHz and f$_{max}$ of 23GHz are obtained for fabricated HBT with emitter area of 3${\times}20^{\mu}m^{2}$ and E-B spacing of 0.2$\mu$m.m.m.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.45-54
• /
• 2008

We have manufactured a photoresist which has excellent dispersity and good applying property due to 330 cps of viscosity for environment-friendly and economical maskless screen plate making. And the photoresist applied on the screen stretched was exposed with mask by UV-LED light source so we could manufacture the photoresist which proper for the UV light source. And it was developed by air spray with $1.7\;kgf/cm^2$ of injection pressure. Because of the excellence of power and resolution of the UV-LED light sourse, the pencil hardness and solvent resistance of curing photoresist film were excellent as those of conventional photoresist film. Moreover the $100{\mu}m$-width stripe image which has sharp edges was formed. So we confirmed a possibility of dry development process by air spray method.

• Korean Journal of Veterinary Research
• /
• v.59 no.3
• /
• pp.119-122
• /
• 2019

The goals of this study were, first, to evaluate the feasibility of inducing gastric perforation with 99% alcohol injection after electrocautery (EA-method), and, second, to observe "enhanced peritoneal stripe sign (EPSS)" and other lesions upon induction of gastric perforation. Six clinically normal beagle dogs were prepared for gastric perforation using endoscopy. After gastric perforation, EPSS and other lesions on ultrasonography were observed eventually (at 0 h, 3 h, day 1, day 2, day 3, day 4, day 5, and day 6). We graded the EPSS depending on its width and number. EPSS was observed until day 4 of the examination in all the 6 dogs. The grades of EPSS were the highest at 3 h and declined gradually. Peritoneal effusion was observed in all dogs at 3 h and on day 1. Regional bright mesenteric fat was confirmed in all dogs on days 3 and 4. In conclusion, gastric perforation can be induced by EA-method. EPSS and peritoneal effusion appear at a very early stage, and regional bright mesenteric fat was identified on days 3 and 4 in almost all dogs with gastric perforation.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.701-707
• /
• 2023

In laser imaging, accurate extraction of the laser's center is essential. Several methods exist to extract the laser's center in an image, such as the geometric mean, the parabolic curve fitting, and the Gaussian curve fitting, etc. The Gaussian curve fitting is the most suitable because it is based on the physical properties of the laser. The width of the Gaussian laser beam depends on the distance from the laser source to the target object. It is assumed in general that the distance remains constant at a laser spot resulting in a symmetric Gaussian model for the laser image. However, on a curved surface of the object, the distance is not constant; The laser beam is narrower on the side closer to the focal point of the laser light and wider on the side closer to the laser source, which causes the distribution of the laser beam to skew. This study presents a modified Gaussian model in the laser imaging to incorporate the slant angle of a curved object. The proposed method is verified with simulation and experiments.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.371-380
• /
• 2006

We design and fabricate a novel tunable wavelength filter, which utilizes long-range surface plasmon-polaritons excited along nm-thick-metal strips. A gold metal strip, with $\sim$ cm length, 20 nm thickness, and $\sim$ 5$\mu$m width, is embedded in thick thermo-optic Polymer films supported by a silicon wafer. A dielectric Bragg grating structure is Placed on the metal strip, so that transmission signals at telecom wavelength are selected by thermal effect of the thermo-optic polymer. High extinction ratio of 25 dB and total insertion loss of $\sim$25 dB/cm can be measured by single-mode coupling of optical fibers. We also verify that wavelength tuning of the long-range surface plasmon-polariton filters can be achieved by electric current directly applied to the metal-strip waveguides.

• Journal of Fashion Business
• /
• v.2 no.1
• /
• pp.25-34
• /
• 1998

This study has it's purpose in examining the materialized background. characteristic of African traditional costume and the A fro fashion of the year 1960. and it's influence on the contemporary fashion. Then the findings are applied to suggest a new way of image creation. 1960' s was the year in which people tried to free oneself from the ruling culture of the social standards. war. and the development of science. By such movement. people started to get interested in the environment and ecology. This then lead to the interest of the rights of the minority. With the youngs as the central figure A fro hair style and dashiki appeared as the street fashion. The characteristics of African costume applied to A fro fashion in 1990' s is as below. First. the North African style. Djellaba. and wrap style in the most common silhouette. Second. heavy materials such as stone. copper. silver. and gold are used. Necklace can be classified according to it's simple but. modern style. delicate but grand style. Bracelets are however. broad in width and many rings are worn widely. Third. Multi colored stripe and prints inspired by tattoo and deformation using red brown. dark beige. and orange are printed on textiles such as see through. Fourth. image of tattoo and deformation are applied to make-up. A fro hair and corn beads are also African taste. Fifth. African taste in recent fashion showed off the black beauty by appointing black models at the collection. In analyzing the study done above. characteristic images of African costume. accessaries and body painting was applied in presenting 3 creative designs. The first design named "Geometric I", took it's motif from the geometric pattern of the body painting with the afro hair. "Geometric II", the second design, showed it's application of geometric pattern of mutilation and the silhouette of the costume by using the see through. The third design called the "Geometric III" showed that the aesthetic and decorative side of clothing can be satisfied by applying various form and color of accessaries as the motif. A fro fashion is chosen as one of the folklore mood and it's beauty is conveyed on till today.