• 전기학회논문지
• /
• 제60권4호
• /
• pp.694-699
• /
• 2011

This paper compares the performance of lightning shielding analysis methods using the seven striking distance formulae in substation. For comparison, we evaluate the number of expected strikes and exposed area using WinIGS Software. Seven striking distance formulae are compared using the electrogeometric model analysis and the rolling sphere method. Based on the electrogeometric model analysis, the risk of shielding failure in either the whole substation or parts of it is determined. According to the simulation results, one can justify whether the substation satisfies the criterion of shielding design. In particular, according to the rolling sphere method, the exposed areas in substation determine the location of the additional shielding poles or shield wires. Therefore, the installation of the additional shielding poles and shield wires in substation was accepted by shield design at the phase conductors exposed in the larger area.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1288-1293
• /
• 2014

본 논문은 MIL-STD-662F의 방호한계속도 산출을 위해 충돌속도를 추정하는 새로운 방법을 제안하였다. 기존 MIL-STD-662F의 방법은 충돌속도를 추정하기 위해 상대공기밀도, 항력계수, 형상인자, 탄도계수 등이 필요하여 기초연구가 필수적이라는 한계를 가지고 있다. 하지만 제안한 방법은 기초연구 없이도, 기기에서 측정된 속도와 측정기기와 타격점까지 거리만으로 충돌속도를 추정할 수 있다. 이를 검증하기 위해 M193탄과 M80탄을 사용하였고, 미국의 검증된 PRODAS의 데이터를 기반으로 MIL-STD-662F 방법의 충돌속도 추정값과 제안한 방법의 충돌속도 추정값을 비교하고 분석였다. 실험결과에서 제안한 방법이 일부 속도구간에서는 MIL-STD-662F의 방법보다 오차가 크지만 방호한계속도 산출은 가능하였고, 대부분의 속도구간에서는 MIL-STD-662F보다 오차가 작다는 것을 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.950-958
• /
• 2017

Viaduct increases the height of subway catenary, namely magnifies lightning attraction scope that lead to higher possibility of suffering lightning stroke. Therefore, it is necessary to analyze performance of lightning striking to catenary of subway in viaduct section and propose an improving lightning protection scheme. In this paper, using ATP-EMTP simulation software to establish an associated model to evaluate lightning withstand level of catenary with existing lightning protection schemes including arrester and grounding point, an improving lightning protection scheme is proposed - every pillar ground earth and arresters are installed with some installing spacing between 200m to 400m based on lightning damage degree and reliability requirements - according to analyzing results: while lightning withstand level is lowest for lightning striking to the neutral pillar, lightning withstand level is greatest for lightning striking to the both-ends pillar that arrester and grounding point are both installed; grounding point could obviously improve lightning withstand level for lightning striking to ground wire while arrester could obviously improve the lightning withstand level for lightning striking to catenary; every pillar ground earth could enhance the lowest lightning withstanding level up to 2.5 times than of that pillar ground earth across every 200m.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2008년도 추계학술대회 및 정기총회
• /
• pp.359-363
• /
• 2008

In recent warfare, importance of counter-fire is increased. New weapon system and counter-fire have critical impact on defeating of the enemy. At an initial battle counter-fire, we need to study about striking plan against the enemy mine artillery. In this paper, we studied, using MANA(agent based model), how much cannon's hit probability and UAV-based target acquisition have influence on striking the mine artillery. We constructed MANA model based on the characteristics of a regional database of Korean peninsula. If we develop detail database of the ROK Army, the proposed MANA model can be used as a war-game model for the regimental level of the Army.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.1022-1032
• /
• 1989

King Sejong's Striking Clepsydra was an elaborate timekeeping and annunciating system incorporating biological automata capable of annunciating hours, intervals and night-watches based on Shou-shih calindrical systems automatically. In this paper the author has studied the original manuscripts on the Striking Clepsydra [Sejong sillock, 65: 1a-3b ff` 16th year, 7th month(1434)] from the technical point of view undertaking a close analysis of this monumental clock and aiming to our modern understanding of the full degree of delicate mechanisms and sophisticated controls built into the night-watch and division announcing clockwork(jackwork). Based on the input/output model, timekeeping, ball-rack, ball-relay, and audible time-indicating mechanisms were synthesized reconstructing night-watch annunciating systems. It revealed that the night-watch and division announcing processes were entirely renewed automatically. Historical and philological data concerning the improvements of the proposed model were discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.787-792
• /
• 1996

The method of manipulation by striking a part and letting it slide until it comes to rest, has been very little studied. However, the manipulation method is not uncommon in our daily lives. We analyze the dynamic behavior of a rigid polygonal part being striked and sliding on a horizontal surface under the action of fiction. There are two parts in this problem; one is the impact problem, and the other is the sliding problem. We characterize the impact and sliding dynamics with friction for polygonal parts, and present the possibility of reverse calculation for motion planning of striking operations. Using a high speed video camera, the computer simulation results are experimentally verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.702-706
• /
• 1996

The King Sejong's Striking water-clock was named for its distictive day and night time announcing system. Its time announcing system generates acoustic and visual signals for the twelve double hour, and combinations of two different acoustic signals for the five night watches, The mechanism of this signal generation system is triggered by a copper ball which is mechanically digitized time keeping signal, and is generated from the water clock. The time announcing system consisted four parts: 1) the mechanical amplifier which changes small copper to heavy steel ball, 2) day time announcing system, 3) night time announcing system, 4) sounding mechanism. The time announcing system of King Seong's Striking Clepsidra is remotely related to the Arabic clock system, however, it does have world-widely distictive mechanisms of its era, such as mechanical amplifier, self-weight rachet mechanism, and resetable mechanical computer etc.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1161-1168
• /
• 2002

Vibration and sound characteristics of King Song-Dok Bell are measured and the modal property is investigated. The effect of striking position and modal property on the beat characteristics is examined. It is first found that the beat characteristics are quite different according to the position on the bell surface and clear beat is periodically generated on the circumference. It turns out that in King Song-Dok Bell, striking Dangjwa(the present striking position) makes a beat in the first vibration mode, as well as it produces very clear beat in the second vibration mode.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.1-14
• /
• 1997

This paper describes a series of numerical simulations of colision between a 310, 000 DWT double hull VLCC (struck ship) and three 35, 000, 70, 000 and 105, 000 DWT tankers (striking ships) using LS/DYNA3D. Collisions are assumed to occur at the middle of the VLCC with the striking ships moving at right angle to the VLCC centerline. Striking ship speeds are varied to find a critical speed without failure of inner side shell, and the informations of collision force and absorption energy of each case are also reported. The validation of LS/DYNA3D in this study was made by comparing the result of numerical simulation of LS/DYNA3D with that of double hull tanker grounding experiment by the Carderock Division of Navla Surface Warfare Center (CDNSWC).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.708-712
• /
• 2013

The appearance of the Korean bell is exceptional comparing to that of other bells. The sound of the Korean bell is also distinguishable because of its remarkable appearance. The sound of the Korean bell is composed of striking sound and residue sound. This study focuses mainly on the striking sound of the Korean bell. The primary purpose of this study is to suggest a proper sound quality evaluation method for Korean bell. To implement this study, examine the formerly established methods which are method using rating method and method using generally used Psychoacoustics metrics. Also, subjective Sound Quality evaluation was conducted to compare the results of method using rating method and the method using psychoacoustics metrics.