• Geomechanics and Engineering
• /
• v.18 no.3
• /
• pp.277-289
• /
• 2019

In this study, an innovative anchoring approach has been developed dealing with all relevant aspects in consideration of previous works. An ultimate pulling force calculation of anchor is presented from a geotechnical point of view. The proposed umbrella anchor focuses not only on the friction resistance capacity, but also on the axial capacity of the composite end structure and the friction capacity occurring around the wedge. Even though the theoretical background is proposed, in-situ application requires high-level mechanical design. Hence, the required parts have been carefully improved and are composed of anchor body, anchor cap, connection brackets, cutter vanes, open-close ring, support elements and grouting system. Besides, stretcher element made of aramid fabric, interior grouting system, guide tube and cable-locking apparatus are the unique parts of this design. The production and placement steps of real sized anchors are explained in detail. Experimental results of 52 pullout tests on the weak dry soils and 12 in-situ tests inside natural soil indicate that the proposed approach is conservative and its peak pullout value is directly limited by a maximum strength of anchored soil layer if other failure possibilities are eliminated. Umbrella anchor is an alternative to conventional anchor applications used in all types of soils. It not only provides time and workmanship benefits, but also a high level of economic gain and safe design.

• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.203-210
• /
• 2011

Bake hardening steels have to resist strain aging to prevent the yield strength increment and stretcher strain during press process and to enhance the bake hardenability during baking process after painting. The bake hardening steels need to control the solute carbon and the solute nitrogen to improve the bake hardenability. Ti and/or Nb alloying for nitride and carbide precipitation and low carbon content below 0.003% are used to solve strain aging and formability problem for automotive materials. However, in the present study, the effect of micro-precipitation of copper sulfide on the bake hardenability and fatigue properties of extremely low carbon steel has been investigated. The bake hardenability of Cu-alloyed bake hardening (Cu-BH) steel was slightly higher (5 MPa) than that of Nb-alloyed bake hardening (Nb-BH) steel, but the fatigue limit of Cu-BH steel was far higher (45 MPa) than that of Nb-BH steel. All samples showed the ductile fracture behavior and some samples revealed distinct fatigue stages, such as crack initiation, stable crack growth and unstable crack growth.

• Journal of radiological science and technology
• /
• v.45 no.3
• /
• pp.205-211
• /
• 2022

This study aimed to provide basic data for 3D printing in the medical health field by developing upper wear fixation device (UWFD), an auxiliary device for shortening chest AP examination time on emergency room beds and non-contact with patients. The standard of hooks was modeled according to the bed frame using the Autodesk Fusion 360. It was printed with Form2 (Formlabs, Somerville, MA, USA), as SLA (stereo lithography apparatus) method, and was washed and hardened using Form Wash and Form Cure. The completed UWFD conducted an online survey on 4 items of stability, convenience, availability, preference and general characteristics. The total stability average was 3.93±0.80, the total convenience average was 3.93±0.68, the total availability average was 4.01±0.89, and the total preference average was 3.80±1.08. This study was significant in suggesting improvements in the general X-ray examination process in the emergency room by designing and making aids to easily fixing the patient's top to the frame of the emergency bed while meeting promptness and non-contact with the patient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5292-5298
• /
• 2012

The purpose of this study is to perform the effectively advanced airway management in an emergency patient with cardiac arrest and trauma by comparing the appearance of influence in a change of visual-field height upon endotracheal intubation according to a change in position with intubation of paramedics in a moving ambulance and by analyzing the appearance of the influence in a patient's change in position with intubation upon speed in endotracheal intubation. Research subjects were randomly extracted 60(30 people for control group, 30 people for experimental group) people as the paramedics who are working at 13 fire stations in C Province. Data analysis was carried out ${\chi}^2$-test, independent t-test, paired t-test by using SPSS WIN 14.0 Version. As a result of research, to improve speed of the advanced airway management, it is considered to be likely effective in a patient's sniffing position and in the endotracheal intubation in the upper space of the main stretcher. The self-confidence in intubation after experiment increased significantly. Thus, the continuous education(training) on the intubation position and method within ambulance is considered to be likely needed for improving efficiency of the advanced airway management.

• Journal of the Society of Disaster Information
• /
• v.14 no.1
• /
• pp.65-71
• /
• 2018

In this study, it is aimed to prevent the spread of pollutants in the event of a major disaster caused by CBRNE accidents and attacks and build up system to provide optimal transport environment for each patient condition By identifying characteristics of existing products and make them immediately applicable in the field. The purpose of this study is suggesting essential consideration in both functional and performance in the development of the isolation unit. As a result of the study, it suggests (1) basic function, (2) efficient field utilization, (3) isolation unit interface and combination of modules in development of isolation unit.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.340-344
• /
• 1997

We proposed and demonstrated a tunable wavelength optical add/drop multiplexer(OADM) employing piezoactuated fiber grating pairs and polarization beam splitters. We used piezostack act as a fiber stretcher, using the fact that the resonant wavelength of the grating can be controlled by the axial strain along the fiber grating. The polarization controlled configuration showed high stability because the reflected signals from the two identical gratings are dropped or added not by interference but by polarizations of the beams. We could add and drop not noly 1549.3nm signal channel(original gratings), but also 1550.1nm(tuned gratings) with PZT actuators and in both cases, we found that the rejection of adjacent channels was more than -26dB, and signal leakage at the gratings was less than -34dB.

• The Korean Journal of Emergency Medical Services
• /
• v.17 no.3
• /
• pp.9-20
• /
• 2013

Purpose: This research project addressed the need to designing more safe and efficient interior of the future ambulance in Korea. Methods: The study sample contained 760 paramedics in 4 districts. Data was collected by using a revised and complemented questionnaire based on literature review. Results: In relation to the efficacy and safety of work, answers related to storage closet showed to be the highest, and the most difficult part of paramedic work in an ambulance was lurching. CPR is the most frequently used emergency care inside an ambulance, but 66% of the paramedics responded that accurate CPR is not possible during vehicle transfer. Safety belts are not worn for 82.8% of the time, because of discomfort (51.3%). 13.8% of the paramedics responded that stretchers are unstable, 29.5% had an experience of having patients fall off the stretcher inside an ambulance. There were comments on installing equipments to prevent noise, and assist communication. Conclusion: The suggested practical layout contains five main modifications 1. Developing specially designed belt is needed for paramedic safety & efficient work. 2. The seats are molded to be ergonomically friendly. 3. Equipments to secure the body and safety devices for CPR are needed. 4. System improvement for communication between the driver seat and paramedics is needed. 5. The stretchers are molded to be maximize efficiency and minimize injury.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.41-48
• /
• 2006

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. Therefore, it has been thought that the distribution of the earth pressure in the crib wall system differ from that of the concrete retaining wall. In this study, the surcharge tests using the scaled model crib wall was carried out to observe the distribution of the earth pressure in the segmental grid retaining wall. The earth pressure was measured in the six specified height of wall, and the distribution of the pressure was analyzed. Furthermore, the earth pressure by computation or by the test using the concrete retaining wall was also considered to make comparison.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.1
• /
• pp.43-53
• /
• 2005

The purpose of this study was to survey a perception of frequency & importance level of job performance, from 249 paramedics who were working at fire station. The job related activities of 4 duties, 18 tasks and 145 task elements were checked by 4 rating scale. The data were analyzed using a SPSS program for descriptive statistics. The results of the study were as follows ; 1. Some of the most frequent tasks were medical tx, managing people & organization, trauma care, pt assessment, general coping skill 2. Some of the most frequent task elements were preparation of written reports, operation of pt lifting supplies, transportation of patients on stretchers, administration of cervical collar and utilization of scoop stretcher. 3. Some of the highest level of importance in task were resuscitation of circulation, surgical tx, safety & infection control, environmental emergency care, trauma care. 4. Some of the highest level of importance in task elements were administration of cervical collar, adult CPR, infant CPR, child CPR, and AED. 5. The highest level of task elements in perception of frequency & importance were administration of cervical collar, infection control after pt care, utilization of long back board, disinfection of ambulance after ride a long, care of chest pain pt, care of unconscious pt, tx of asthma. 6. A difference between frequent & importance score were due to lack of supplies(41%), structural problems(30%) and medical control system(16%), lack of skills(10%), Suggestion; 1. This paper would be more reliable and confirm through wilder range of survey. 2. It would be necessary of more depth survey through dacom study from paramedic. 3. Development of field oriented protocol & curriculum that based on task elements which have high score of both frequency & importance level is required.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.516-520
• /
• 2005

We proposed an efficient phase stepping method for the use in fiber-optic ESPI. To improve phase-stepping accuracy and efficiency, a fiber-optic Michelson interferometer was phase-modulated by a ramp-driven fiber stretcher, resulting in 4$\pi$ phase excursion in the PD interference signal. The zero-crossing points of the signal, which have consecutive $\pi$ phase difference, were carefully detected and used to generate trigger signals for the CCD camera. From the experimental results by using this algorithm, $\pi$/2 phase-stepping errors between the speckle patterns were measured to be less than 0.6 mrad with 100 Hz image capture speed. Also it has been shown that the error from the nonlinear phase modulation and environmental perturbations could be minimized without any feedback algorithm.