• Journal of Acupuncture Research
• /
• 제36권1호
• /
• pp.21-27
• /
• 2019

Background: The intelligent tissue hypothesis holds that an organ's states (be it normal function or stressed states) are reflected in real time at its related acupuncture points (acupoints), causing physical, real-time changes in the local tissue. The experiment was devised to test this. Methods: The patient drank chilled water while the impedance at 6 stomach-related acupoints was monitored in real time (sample rate of 1 kHz). Any changes in the local tissue at the acupoints ought to be reflected in changes in the impedance. Results: The impedance at every test acupoint showed a response to the chilled water being ingested. Also, the duodenal pacesetter and the stomach's slow waves were clearly visible in the impedance pattern at all the acupoints. Conclusion: Hence, many separate details of the stomach's function were reflected at these acupoints. The duodenal features were consistent with the traditional indications for these acupoints, which are noted to be able to treat intestinal conditions. Therefore, the results were consistent with the hypothesis and also provided a possible explanation for how the use of these acupoints is able to treat intestinal conditions.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.73-87
• /
• 1996

새로 개발된 분말침투 및 연속 다중함침법에 의해 제조된 세라믹 섬유 복합체의 기 계적 물성을 3점 곡강도 빛 인장 시험을 통하여 평가하였다. 정확한 물성 측정을 위하여 strain g gauge 빛 acoustic emission 측정 장비가 사용되였다. 실험 시편은 $Al_20_3$직포$Al_20_3$와 SiC직포/SiC를 기본 재료로 하고 있으며, 일방향으로 배열왼 SiC 섬유(Textron SCS - 6)/SiC 복합체를 비교 목적으로 제작 시험하였다. 이론 밀도의 약 73%인 SiC 직포/SiC 복합체의 최대곡강도는 300 MPa이고, 기지내 균열이 처음 발생하는 응력은 77 MPa였다. 인장강도는 곡강도의 1/3 정 도의 낮은 값을 나타내였고, 인장 시험중의 첫번째 기지 균열 응력 또한 곡강도 시험에서 얻은 값보다는 상당히 낮은 값을 보여주였다. 곡강도 물성에 비교하여 상대적으로 낮은 인장물성은 WeibuH 통계 처리 방법에 의하여 응력을 받고 있는 부피의 차로 정량적으로 해석하였다. 해석 결과, 직포가 충으로 배열된 복합체의 최대 인장강도는 응력을 받는 섬유의 길이에 의존하며, 기지내 균열이 생기는 첫번째 응력은 응력을 받는 부피에 의해 결정됨을 보여주었다. SiC 휘스 커를 기지에 보장함으로써 복합체의 기지파괴 strain을 향상시키는 이유로, 첫번째 기지 균일 응력이 증가됨을 확인하였다.

• 대한수의학회지
• /
• 제18권2호
• /
• pp.61-67
• /
• 1978

The detection of Bordetella bronchiseptica which is supposed to be an agent of the infectious atrophic rhinitis of swine, is likely to receive more attention in the future as the pork industry comes to realize that eradication of this infection from breeding herds is a practical possibility. Experiments described here were carried out to establish the rapid plate agglutination test for the detection of the infectious atrophic rhinitis of swine in the field using the criteria of antigen preparation, effects on the antigenecity after storing of the antigen and reaction appearing time. Also, the agglutinabilities between the plate and tube method were compared and the degree of pathological lesions were recorded in relation to tube agglutination titers. Obtained results were as follows: 1. No differences were noted in the agglutinabilities on the plate agglutination test between the treatments in antigen preparation-formolized, merthiolate-killed and living organism. 2. The agglutinability of the antigens did not show any significant changes until 10 weeks of storage at 4 C; however, after 10 weeks of storage, non-specific reaction was observed with the HPCD control sera. 3. The results of the plate and tube agglutination tests were not comparable but the effective use of the plate method in Bordetella bronchiseptica eradication programs in pigs especially in the sow is stressed as a screening test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.325-330
• /
• 2004

Recently, the request for the high strength of material is more and more increased in the area of industrial environment and machinery. To accomplish the high strength of materials, carbonizing treatment, nitrifying treatment, shot-peening method are representatively applied, however, shot-peening method is generally used among the surface processes. Shot peening is a cold working process used to impact Compressive residual stressed in the exposed surface layers. Benefits due to shot peening are increase in resistance to fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this study, the influence of shot peening on the corrosion was investigated on spring steel immersed in 3.5% NaCl. The immersion test as performed on the two kinds of specimens. Corrsion potential, polarization curve, residual stress and etc, were investigated from experiment results. From test result the effect of shot peening on the corrosion was evaluated. The important results of the experimental study on the effects of shot peened on the environment corrosion of spring steels are as follows; In case of corrosion potential, shot peened specimen shows more activated negative direction as compared with parent mental. Surface of specimen, which is treated with the shot peened is placed as more activated state against inner base metal. It can cause t도 anti-corrosion effect on the base metal.

• Annals of Clinical Neurophysiology
• /
• 제10권1호
• /
• pp.29-32
• /
• 2008

Although various criteria on the diagnosis of diabetic neuropathy are applied from trial to trial, being tailored in concert with its purpose, the utmost evidences of the diagnosis are subjective symptoms and objective signs of neurologic deficit. The application and interpretation of auxiliary electrophysiological test including nerve conduction study (NCS) should be made on the context of clinical pictures. The evaluation of the functions of small, thinly myelinated or unmyelinated nerve fibers has been increasingly stressed recently with the advent of newer techniques, e.g., measurement of intraepidermal fiber density, quantitative sensory testing, and autonomic function test. And the studies with those techniques have shed light to the nature of the evolution of diabetic neuropathy. The practical application of these techniques to the diagnosis of diabetic neuropathy in the individual patients, however, should be made cautiously due to several shortcomings: limited accessibility, wide overlapping zone between norm and abnormality with resultant unsatisfactory sensitivity and specificity, difficulty in performing subsequent tests, unproven quantitative correlation with clinical deficit, and invasiveness of some technique. NCS, as an extension of clinical examination, is still the most reliable electrophysiological test in evaluating neuropathy and gives the invaluable information about the nature of neuropathy, whereas the newer techniques need more refinement of the procedure and interpretation, and the accumulation of large scaled data of application to be considered as established diagnostic tools of peripheral neuropathy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1434-1441
• /
• 2005

For anchored system applications, each ground anchor is tested after installation and prior to being put into service to loads that exceed the design. This load testing methodology, combined with specific acceptance criteria, is used to verify that the ground anchor can carry the design load without excessive deformations and that the assumed load transfer mechanisms have been properly developed behind the assumed critical failure surface. After acceptance, the ground anchor is stressed to a specified load and the load is locked-off. The two types of load tests conducted during the research program included performance test and creep test which were carried out in accordance with testing procedures by AASHTO(AASHTO 1990) and FHWA(Weatherby 1998) at Samsung-Dong 00 Site. Form the measurements, ultimate load and creep rate of anchors are proposed for straight shaft pressured grouted anchors in waste landfill. The load distribution on the grout was obtained from the measured strain data at each fraction of the ultimate load during the load tests.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.131-138
• /
• 2000

The research purpose of this paper is to investigate the influential Parameters on the unbonded tendon stress. The parameters were the reinforcing ratio, the prestressing ratio, and the loading type. To this end. first, the influence of parameters were examined with twenty eight test results obtained from references. Then, an experimental study was carried out with nine specimens. Test variables were the reinforcing ratio and the prestressing ratio. Specimens were divided equally into three groups and each group had a different level of the reinforcing ratio. Each specimen within a group has a different level of the prestressing ratio. The investigation with previous and current tests revealed the followings; (1) the length of crack distribution zone does not have a close relation with the length of plastic hinge. (2) the prestressing ratio does not affect both the length of crack distribution and the length of plastic hinge, (3) the tendon stress variation is in reverse relation with the ratios of mild steels and tendons, (4) the loading type nay not affect significantly the length of crack distribution zone, (5) AASHTO LRFD Code equation and Moon/Lim's design equation predicted the test results well with some safety margins.

• 한국유기농업학회지
• /
• 제28권3호
• /
• pp.417-430
• /
• 2020

이상기후로 인한 건조 스트레스에 의해 식물의 기공전도도와 광합성의 감소로 생장과 작물생산량이 감소하는 피해가 발생하고 있다. 이러한 식물의 스트레스를 완화하는 유용 곰팡이를 선발하기 위해 국내 농경지에서 41 균주를 분리하였으며, 발아율 검사로 2종의 곰팡이를 선발하였으며, 식물검정을 통해 최종 Trichoderma sp. GL02를 선발하였다. GL02를 고추 식물체에 처리하였을 때, 대조구에 비해 기공전도도가 증가하고, MDA와 전기전도도는 감소하는 것으로 보아, GL02를 처리한 고추 식물체는 건조 스트레스가 완화되며, 건조 후 재관수하였을 때 회복도 효과적이었다. 이러한 결과는 GL02는 고추 식물체에 건조 스트레스를 완화시키는 유용한 소재로 사용될 수 있음을 시사한다. 또한, 추후 포장 실험을 통하여 Trichoderma sp. GL02의 건조 스트레스 완화 효과가 고추 생산량과 연관이 있는지 확인해 볼 예정이다.

• 한국가정과교육학회지
• /
• 제3권1호
• /
• pp.131-146
• /
• 1991

The purpose of this study is to acquire basic materials to help the students Others of families in their homes through understanding them. This study was based on the questions asked to 100 students without parents in their homes and 100 students in standard homes. Percentage, T-test, counseling sample were used for statistical report. The following are the analysed results of this study. 1. Among the ten events, except for family life and economic problems, there were no distinguished contrasts between the students without parents in their homes and the students in standard homes. 2. The factors influencing stress are mainly plan for future, social environment, school life and learning and students without parents are especially affected by economic problem. 3. Comparing students without parents with one another in stress, the students without parents have economic problem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother the difficulty of house affairs and emotional uneasiness of family. The students with step-mother have much misunderstasnding because of the lack of conversation among their family. The students with step-father hardly kconverse with their father and feel uneasy in family life. Based on all can be gailed these results, the following conclusion. 1) The students Other Types of families are stressed much more than the students in standard homes in family life and economic problems. 2) All Students are Stressed by bad environment, the plan of future, scholl and learning, 3) Comparing the Stubents without parents with one another, the students without parents have economics probem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother house affairs and emotional uneasiness off family. The students of step-father and step-mother have the misuder standing by the lark of comversation, the deficiency of affection and the uneasiness off family life.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.102-107
• /
• 2022

South Korea will soon be a super-aged society, as more than 20.6% of its population will be 65 years and older by 2025. As of 2022, 17.5% of the total population in South Korea is 65 years and older, which exceeds the set threshold for an aged society, where more than 14% of the population is 65 years and older. The proportion of older subway construction workers has increased. Aging workers and their work stress negatively impact their workability. A previous study demonstrated that the stress index measured using the uBioMacpa measurement device (Macpa stress index) had a significant correlation with work stress in South Korea. The device tests vascular health and measures stress levels via Macpa signal analysis. In this study, the pulse waves of subway construction workers were measured using uBioMacpa to identify their stress levels. The stress levels were analyzed by age, years of service, job position, employment type, and work type. Herein, these statistics could not be easily represented by a normal distribution; therefore, the Kruskal-Wallis test, a nonparametric statistical method, was used for the analysis of data. The results showed that age, job position, employment type, and working type affected the Macpa stress index and the stress levels of workers increased with age. In terms of job position, technical engineers were more stressed than other workers because of their poor working environment. In terms of employment type, daily-wage workers were more stressed than other workers. In terms of working type, tunneling, waterproofing, and construction scored the highest Macpa stress indexes without any significant difference, whereas earthworks scored the lowest. Based on the analysis of Macpa stress index, safety and health management plans were proposed to reduce the stress levels of workers. Moreover, a manual for efficient stress management must be developed for subway construction workers.