• Structural Engineering and Mechanics
• /
• 제61권1호
• /
• pp.117-124
• /
• 2017

Load testing is one of the important tests to determine if the structural elements can be used at the intended locations for which they have been designed. It is nothing but gradually applying the loads and measuring the deflections and other parameters. It is usually carried out to determine the behaviour of the system under service/ultimate loads. It helps to identify the maximum load that the structural element can withstand without much deflection/deformation. It will also help find out which part of the element causes failure first. The load-deflection behaviour of the road bridge girder has been studied by carrying out the load test after simulating the field conditions to the extent possible. The actual vertical displacement of the beam at mid span due to the imposed load was compared with the theoretical deflection of the beam. Further, the recovery of deflection at mid span was also observed on removal of the test load. Finally, the beam was checked for any cracks to assert if the beam was capable of carrying the intended live loads and that it could be used with confidence.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.302-309
• /
• 2017

The ageing of XLPE cable insulation will lead to the accelerating accumulation of space charge, which will greatly affect the safe operation of the HVDC cable. In order to investigate the influence of different ageing modes on the space charge distribution of the HVDC cable, thermal stressed, electrical stressed and electro-thermal stressed endurance tests were carried out on the XLPE peelings. The tested XLPE peelings were obtained from 160kV HVDC cable insulation. The endurance tests were carried at thermal stress of 363K, electrical stress of 20kV/mm DC and a combination of both. The Pulsed Electro-Acoustic (PEA) method was used to measure the space charge distribution of the samples. The influences of ageing on the trap energy distribution were analyzed based on the isothermal relaxation theory and the decay characteristics of the space charge. The results showed that thermal ageing would help to improve the crystalline morphologies of the XLPE at the early stage. The total amount of space charge decreased compared to the ones before thermal ageing. The long term of electrical stress would result in the cleavage of polymer molecule chains which would intensify the accumulation of space charge and increase the density and depth of electron traps. With a combination of electrical and thermal stress, the injection and migration of space charge were more significant. Besides, the depth and density of electron traps increased rapidly with the increase of endurance time.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.56.1-56.1
• /
• 2009

• 대한전기학회논문지:전력기술부문A
• /
• 제51권11호
• /
• pp.535-543
• /
• 2002

Modern power grids are becoming more and more stressed with the load demands increasing continually. Therefore large stressed power systems exhibit complicated dynamic behavior when subjected to small disturbance. Especially, it is needed to analyze special conditions which make small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability and operating conditions can be identified well using node-focus point and 1:1 resonance point. Also, the weak point which limits operating range is found by the analysis of resonance condition, and it is shown that reactive power compensation may solve the problem in the weak points. The proposed method is applied to test systems, and the results illustrate its capabilities.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.94-100
• /
• 2009

This paper proposes a novel curved shape piezoelectric unimorph using a new fabrication method. Instead of using thermal coefficient mismatch, which has been used for conventional processes for curved shape unimorphs, we used pre-stressed substrates and the room temperature adhesion process. A difference of the mechanical strains between the substrate and the piezoelectric layer makes the final manufactured unimorph get curved. Several performance tests of the proposed unimorph actuators were accomplished and the test results showed the proposed unimorph actuator got comparable actuation capability compared with conventional curved shape actuators.

• 음성과학
• /
• 제2권
• /
• pp.135-147
• /
• 1997

This thesis describes pronunciation differences of vowel lengths between Koreans and Americans speaking English words and sentences. This study also analizes the reasons for these differences with the help of acoustic instruments. Sixteen sentences and eight words were selected as the experimental material. The informants for this study were 9 males; 3 Americans and 6 Koreans, who were asked to pronounce the test words and sentences five times. In this study, the acoustical analysis to measure duration was done through computer digital techniques. According to the results of the experiment, duration of 8 English vowels pronounced between Koreans and Americans shows very different features. When Koreans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much shorter than in other positions, such as in the sentence-initial and in word position. On the contrary, when Americans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much longer than in other positions. If the correlation between length and stress were to be studied in a more detailed manner, it would give fundamental help to the study of relation between stress and length.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.109-111
• /
• 2001

Modern power grids are becoming more and more stressed with the load demands increasing continually. Therefore large stressed power systems exhibit complicated dynamic behavior when subjected to small disturbance. Especially, it is needed to analyze special conditions which make small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability and operating conditions can be predicted well using node-focus point and 1:1 resonance point. Also, the weak point which limits operating range can be identified by the analysis of resonance condition. The proposed method is applied to test systems, and the results illustrate its capabilities.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.257-259
• /
• 2003

Sulfide Stress Corrosion Cracking(SSCC) of welded Steel pipe has been investigated. A specimens are stressed into the synthetic sea water saturated with H$_2$S. Therefore SSCC occur at the hardnest point. we are discusses the test methods used for laboratory corrosion testing of welded steel pipe and the results of test.

• 영어어문교육
• /
• 제15권2호
• /
• pp.261-280
• /
• 2009

This study focuses on providing the pedagogical implications of stress in English pronunciation teaching since stress is one the most important characteristic factors in English pronunciation (Bolinger, 1976; Brown, 1994; Celce-Murcia, Brinton & Goodwin, 1996; Kreidler, 1989). The author investigated stress production regarding in terms of duration, pitch, and intensity by a group of native speakers of English and a group of low-proficiency South Kyungsang Korean college students for their pre-test. For both of the pre- and post-test, the same stimuli, which consisted of a one-syllable word, two two-syllable words, three three-syllable words, and three four-syllable words, were used along with the various sentence positions: isolation, initial, medial, and final. Soft ware programs, ALVIN and Praat, were used to record and analyze the data. Since Celce-Murcia et al. (1996), Klatt (1975), and Ladefoged (2001) treat duration of the stressed syllable more significantly than other factors, pitch and intensity, with respect to the listener's point of view, the author developed a special method of teaching English stress using a traditional Korean drum to emphasize duration. In addition, the results from the native speakers' production showed that their main strategy to realize stress was through lengthening stressed syllables. After six weeks of stress instruction using the drum, the production of the native speakers and the SK Korean participants from the pre- and post-test were compared. The results from the post-test indicated that the participants showed great improvement not only in duration but also in pitch after the stress instruction. Pitch improvement was unexpected but well-explained by the statement that long vowels receive accent in loan word adaptation in North Kyungsang Korean. The results also showed that the Korean participants' pitch values became more even in their duration values for each syllable as the structure of the word or the sentence became more complex, due to their dependency upon their L1.