• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.96-104
• /
• 2000

This paper represents to develop a computer software system which is capable to analyze the phase transformation of high strength steel(BV-AH32) and to predict heat transfer and welding residual stress due to phase transformation during Gas Metal Arc(GMA) welding. The developed model was considered temperature dependent properties such as young's modules, coefficient of thermal expansion and yield stress as well as the double ellipsoidal heat distribution by the moving arc. From the results, it was found that the longitudinal and transverse residual stresses calculated by the coupled analysis of heat transfer, residual stress and phase transformation showed good agreement with the experimental data. In addition, the temperature distribution as well as longitudinal and transverse residual stresses of weldment by the 1-pass and 2-pass of welding were also determined.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.319-330
• /
• 2011

We consider the stress-strength model in which a unit of strength $T_2$ is subjected to environmental stress $T_1$. An important measure considered in stress-strength model is the reliability parameter R=P($T_2$ > $T_1$). The greater the value of R is, the more reliable is the unit to perform its specified task. In this article, we consider the situations in which $T_1$ and $T_2$ are both independent and dependent, and have certain bivariate distributions as their joint distributions. To study the effect of dependency on R, we investigate several bivariate distributions of $T_1$ and $T_2$ and compare the values of R for these distributions. Numerical comparisons are presented depending on the parameter values as well.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.89-106
• /
• 2009

The purpose of this study is to provide necessity of job stress management to chief executives officers at small and medium size printing companies. At the same time, this study offers information of successful job stress management. When managing job stress is successfully accomplished, it increases job involvement of workers and brings high productivity eventually. Independent variables are decision-making right at the job, insecurity of job, and unreasonable reward at the company, while job involvement is dependent variable at this study. After analyzing data gathered, decision-making right influences job attachment and pursuing job outcome. And insecurity of job, that is the difficult job transferring, is significant to job accomplishment.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.513-516
• /
• 2001

Water stress measurements of rice that use spectral reflection characteristics have been conducted to detect a water stress of rice during growing stage. Water stress reaction was measured using a spectroradiometer in the wavelength range from 300nm to 1100nm. In order to maintain all the experimental conditions, the measurement time have been settled at a fixed solar radiation times. Spectral reflectance were measured as a function of the moisture content. The results indicate that the spectral reflectance of rice was dependent on moisture content. As the moisture content is lowered the spectral reflectance of rice formed in NIR wavelength range increased. This effect can be best explained in terms of water stress.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1115-1120
• /
• 2003

In this paper, we investigated the position dependent stress distribution of indium-tin-oxide (ITO) film on Polycarbonate (PC) substrate by external bending force. It was found that there are the maximum crack density at the center position and decreasing crack density as goes to the edge, In accordance with crack distribution, it was observed that the change of electrical resistivity of ITO islands is maximum at the center and decrease as goes to the edge. From the result that crack density is increasing at same island position as face plate distance (L) decreases, it is evident that the more stress is imposed on same island position as L decreases.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.264-266
• /
• 2004

for the kぉ mechanics analysis of a crack in a weld of dissimilar steels, residual stress analysis and fracture analysis must be performed simultaneously. The standard definition of the J-integral leads to a path dependent value in the presence of a residual stress field. And unlike cracks in homogeneous materials, a bimaterial interface crack always induces both opening and shearing modes of stress in the vicinity of the crack tip. Therefore, it is necessary to develope a path independent J-integral definition for a crack in a residual stress field generated by welding of dissimilar steels. This paper addresses the modification of the Rice-J-integral to produce a path independent J-integral when residual stresses due to welding of dissimilar steels and external forces are present. The residual stress problem is heated as an initial stain problem and the J-integral proposed for this class of problems is used And a program which can evaluate the 1-integral for a crack in a weld of dissimialr steels is developed using proposed J-integral definition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.172-179
• /
• 1996

For mechanical systems operating at high tempertature, thermal fatigue phenomenon has been recognized as a major cause of mechanical component failures. To evaluate cumulative fatigue damage as a conesquence of thermal fatugue on real time, the stress tranfer function(Green's function) approach is popularly used. The objective of this paper is to investigate the effect of thermophsical properties on the stress tranfer function. For this purpose a modified Green's function approach considering temperature-dependent thermophysical properties is proposed. Two case studies were performed and the proposed approach agrees well with full finite element analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.547-553
• /
• 1990

With alumina ceramics to copper brazement of cylindrical shape, the thermal stress analysis was carried out by finite element method. Elastic and plastic behaviour was considered to copper, but only elastic behaviour was considered to alumina. Also material properties of alumina and copper were considered in not constant values but variable functions dependent on temperature. The result of analysis is shown that maximum tensile longitudinal stress is occurred at perimeter of alumina side interface and maximum compressive radial and tangential stresses are occurred at center of alumina side interface. Because of bending effect, tensile raidial and tangential stresses are occurred at near bottom of alumina, far from interface.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.689-705
• /
• 2016

The Drucker-Prager yield criterion is combined with an equilibrium equation to provide the elastic-plastic stress distribution within rotating annular hyperbolic discs and the residual stress distribution when the angular speed becomes zero. It is verified that unloading is purely elastic for the range of parameters used in the present study. A numerical technique is only necessary to solve an ordinary differential equation. The primary objective of this paper is to examine the effect of the parameter that controls the deviation of the Drucker-Prager yield criterion from the von Mises yield criterion and the geometric parameter that controls the profile of hyperbolic discs on the stress distribution at loading and the residual stress distribution.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.145-156
• /
• 2019

Since behaviors of loose, dense, silty sands vary under seismic loading, understanding the liquefaction mechanism of sandy soils continues to be an important challenges of geotechnical earthquake engineering. In this study, 36 deformation controlled cyclic simple shear tests were performed and the liquefaction potential of the sands was investigated using three different relative densities (40, 55, 70%), four different effective stresses (25, 50, 100, 150 kPa) and three different shear strain amplitudes (2, 3.5, 5%) by using energy based approach. Experiments revealed the relationship between per unit volume dissipated energy with effective stress, relative density and shear strain. The dissipate energy per unit volume was much less affected by shear strain than effective stress and relative density. In other words, the dissipated energy is strongly dependent on relative density and effective stress. These results show that the dissipated energy per unit volume is very useful and may contain the non-uniform loading conditions of the earthquake spectrum. When multiple regression analysis is performed on experiment results, a relationship is proposed that gives liquefaction energy of sandy soils depending on relative density and effective stress parameters.