• The Korean Journal of Physiology
• /
• 제16권2호
• /
• pp.129-136
• /
• 1982

We studied this experiment to compare the effects of exercise and other body conditions: i.e., Flack test, cold pressor test and bicycle ergometry on the electrocardiogram. We had sixty healthy college students who were thirty nine men and twenty one women. Their $mean{\pm}SD$ values of physical characteristics were as follows: age; $22.0{\pm}1.4$, weight; men $61.7{\pm}5.6\;kg$, women $46.2{\pm}7.47\;kg$. We observed the changes of P-Q and Q-T interval, R and T amplitude, mean QRS vector, S-T segment deviation, and P and T vector. The result obtained were summarized as follows: P vector was shifted rightward regardless of the type of stress. T vector was shifted var-in each stress but in the bicycle ergometry T vector was shifted leftward. Mean QRS vector was shifted rightward immediately after the bicycle ergometry. Percentage of the occurrence of the depression of S-T segment was 21.7% at the immediately after the submaximal bicycle ergometry in lead II. The elevation of S-T segment was often observed after the mild stresses. Increased amplitude of T wave in the cold pressor test and decreased amplitude of T wave in the bicycle ergometry were observed. In the bicycle ergometry and other stresses, the precise mechanism of S-T segment changes was unexplained but insufficient repolarization in base or apex of the left ventricle due to heart strain was indicated by so called S-T vector analysis.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.

• Current Research on Agriculture and Life Sciences
• /
• 제17권
• /
• pp.59-63
• /
• 1999

벼의 엽록체 small HSP의 고온 스트레스 하에서의 기능을 밝히기 위하여 Oshsp21 cDNA를 pET 발현 vector에 도입하였다. 형질전환된 대장균 배양액에 IPTG를 첨가하여 단백질 발현을 유도시킨 다음 고온 stress 하에서의 생존율을 대조구와 비교하였다. 그 결과 대조균주의 경우 $50^{\circ}C$에서의 생존율이 크게 감소하였으나 Oshsp21이 발현된 대장균의 경우 70% 이상의 생존율을 나타내었다. 또한 대장균 단백질을 $55^{\circ}C$에서 30분간 열처리한 후, 대장균 단백질을 가용성과 비가용성 단백질로 분획한 다음, 각각의 비율을 조사한 결과, 대조균주의 경우 총 단백질의 약 60%가 비가용성 단백질로 변성되었으나, Oshsp21을 발현시킨 대장균의 경우 총 단백질의 약 35%만이 비가용성 단백질로 나타났다. 이러한 결과는 벼의 엽록체 small HSP는 세포내에서 분자 chaperone으로 기능하여 고온내성을 부여할 수 있음을 나타낸다.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.469-475
• /
• 2010

The objective of this study is to integrate reliability analysis into shape optimization problem using the evolutionary structural optimization (ESO) in the application example. Reliability-based shape optimization is formulated as volume minimization problem with probabilistic stress constraint under minimization max. von Mises stress and allow stress. Young's modulus, external load and thickness are considered as uncertain variables. In order to compute reliability index, four methods, i.e., reliability index approach (RIA), performance measure approach (PMA), single-loop singlevector (SLSV) and adaptive-loop (ADL), are used. Reliability-based shape optimization design process is conducted to obtain optimal shape satisfying max. von Mises stress and reliability index constraints with the above four methods, and then each result is compared with respect to numerical stability and computing time.

• 한국지반공학회지:지반
• /
• 제1권1호
• /
• pp.73-84
• /
• 1985

본 연구에거는 유한요소법에 의해서 제상하중을 받고 있는 연약지반의 응력분포와 변위를 규명하 였다. 응력에는 체적응력, 간극수압, 연직응력, 수평응력, 전단응력이 포함된다. 유한요소기법으로서 Christian-Boehmer방법을 택하였으며 진배수 및 비배수조건에서 일반탄성model과 참정 Cam-clay model을 지배방정으로 선정하였다. 그 결과는 다음과 같다. 1. 체적응력은 간극수압과 거의 일치한다. 이는 비배수조건에서 전응력이 간극수탄과 같다는 것 을 의미한다. 2. 연직응력은 배수 및 비배수표건이라 구성식의 model에 관계없이 같은 갈을 나타런다. 3. 수평응력은 배수조건과는 무관하지만 구함식의 model에 따라서 다른 값으로 나타난다. 4. 전단응력은 배수조건 및 구성식의 model model에 따라 다른 값이 된다. 수정 Cam-clay에 의한 해석치가 가장 크게 된다. 5. 변위 Vector의 방향은 하중이 증가하는 동안 성토법면근방에서 외향으로 향한다. 6. 변위의 크기는 수정 Cam-clay에 의한 해석이 탄성 model의 2배가 된다.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.178-185
• /
• 2005

Crack tip displacement is originated by tensile stress component, s and shear stress component, t on pure Mode I and pure Mode II. The crack tip displacement(CTD) depends on combined types of different two stress components under mixed-mode loading conditions (MMLC). Thus, the analysis of crack tip displacement must be CTD vector, dv which is composition of ds and dt under MMLC. In this paper, various effects of MMLC on the crack closure are studied experimentally. The crack closure magnitude is calculated from the information of crack tip displacement under MMLC. This information has been obtained from the high resolution optical microscope in direct observations of crack displacement behavior at the crack tip. Observed crack tip displacement is analyzed by using CTD vector to determine crack opening load. The various effects of MMLC on the crack closure are explained using crack opening ratio with crack length and mode mixture. The effective stress intensity factor considering crack closure is also discussed.

• 한국농공학회지
• /
• 제44권1호
• /
• pp.103-115
• /
• 2002

During this study, various stress path tests in previous isotropic and anisotropic (compression and tension) stress histories are performed on weathered granite soil sampled at Iksan, Jeonbuk. Yielding points are determined from various stress-strain curves(stress ratio-shear strain, volumetric strain, normalized energy and dissipated total energy curves). The shape and characteristics of isotropic and anisotropic yielding curves are examined. The main results are summarized as follows . 1) Yielding curries defined from stress ratio - normarized energy and dissipated total energy curves show almost perfect ellipse. 2) Directions of plastic strain incremental vector are not perpendicular to yielding curve. 3) Normarized energy and dissipated total energy spread with similar tendency with respect to yielding currie in stress space.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.159-165
• /
• 2003

Most engineers interested in stress singularities have focused mainly on the research of power stress singularities for v-notched cracks in dissimilar materials. The logarithmic stress singularity was discussed a little in Bogy's paper. The power-logarithmic stress singularity was reported by Dempsey and Sinclair. It was indicated that the logarithmic singularity is only a special case of power-logarithmic stress singularities. Then, Dempsey reported specific cases which have power-logarithmic singularities even fur homogeneous boundary conditions. It was known that logarithmic stress singularities for v-notched cracks in dissimilar materials occurs when the surfaces of a v-notched crack have constant tractions. In this paper, using the complex potential method, the stresses and displacements having logarithmic stress singularities were obtained and the coefficients vectors were calculated by a numerical program code: Mathematica. It was shown that our analysis models don't have logarithmic stress singularities under the constant tractions, although the coefficient vectors are existing.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.145-151
• /
• 1994

Welded connections have been designed on basis of allowable stresses, wherein the response to loading is assumed to be totally elastic. This is the vector analysis method, which resolves the stresses determined from the direct stress formula and the torsion formula into a vector combination to obtain a solution. It has been known that this method gives conservative answers and typically a very high factor of safety. An analytical method based on the Instantaneous Center of Rotation has been developed which predicts the ultimate strength of an eccentically loaded fillet welded connection. The method of Instantaneous Center of Rotation results in weld resistance capacities greater than the vector analysis method, by recognizing the variation in fillet weld strength with respect to the direction of the applied loading and actual load-deformation response of elemental fillet welds. The procedure of numerical analysis is iterative and complex. The relations between vector analysis method and the method of Instantaneous Center of Rotation on eccentrical distance subjected to variation of load direction are presented in this paper. Considering of the effects on configuration of weld groups, the method of Instantaneous Center of Rotation are provided a more exact results of the numerical analysis.

• International Journal of Concrete Structures and Materials
• /
• 제5권1호
• /
• pp.29-33
• /
• 2011

This article employs Least Square Support Vector Machine (LSSVM) for determination of fracture parameters of concrete: critical stress intensity factor ($K_{Ic}^s$) and the critical crack tip opening displacement ($CTOD_c$). LSSVM that is firmly based on the theory of statistical learning theory uses regression technique. The results are compared with a widely used Artificial Neural Network (ANN) Models of LSSVM have been developed for prediction of $K_{Ic}^s$ and $CTOD_c$, and then a sensitivity analysis has been performed to investigate the importance of the input parameters. Equations have been also developed for determination of $K_{Ic}^s$ and $CTOD_c$. The developed LSSVM also gives error bar. The results show that the developed model of LSSVM is very predictable in order to determine fracture parameters of concrete.