• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1760-1765
• /
• 2007

This paper shows a derating design approach for LED reliability improvement. The LED is widely used in display devices or circuits. The main failure of interest is defined as 100% reduction of the light output intensity of LED resulting from corrosion due to stresses, i.e. temperature and humidity. The lifetime is varied according to the stress levels under where the LED operates so that correlation of the lifetime to these stress levels over time is modeled through accelerated life testings. A derating design approach to accomplish a required reliability level of LED is proposed to determine adequate the stress levels. In the approach, $B_{10}$ life, Failure rate, Sensitivity Analysis of LED are used as a reliability metric.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.25-29
• /
• 2017

This paper presents a unique pressure sensor design for environmental applications. The design uses a new geometry for a multi bossed beam-membrane structure with a SOI (silicon-on-insulator) substrate and a mechanical transducer. The Intellisuite MEMS CAD design tool was used to build and analyze the structure with FEM (finite element modeling). The working principle of the multi bossed beam structure is explained. FEM calculations show that a sensing diaphragm with Mises stress can provide superior linear response compared to a stress-free diaphragm. These simulation results are validated by comparing the estimated deflection response. The results show that, the sensitivity is enhanced by using both the novel geometry and the SOI substrate.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.124-131
• /
• 1996

The dynamic material property of Mn-B ally high-strength steel is investigated through the rod impact test which is one of simple test methods for the analysis of the material behavior under high-strain-rate. Rod impact test is performed to produce the deformed shape of rod and analyzed by the one-dimensional theory based on conservation law and the two-dimensional hydrocode AUTODYN-2D. The dynamic yield stress is determined and compared with the static yield stress to investigate the strain-rate sensitivity of Mn-B alloy high-strength steel.

• Mycobiology
• /
• v.42 no.1
• /
• pp.52-58
• /
• 2014

A nucleoside diphosphate-linked moiety X (Nudix) hydrolase-like gene, YSA1, has been identified as one of the gromwell plant extract-responsive genes in Cryptococcus neoformans. Ysa1 is known to control intracellular concentrations of ADP-ribose or O-acetyl-ADP-ribose, and has diverse biological functions, including the response to oxidative stress in the ascomycete yeast, Saccharomyces cerevisiae. In this study, we characterized the role of YSA1 in the stress response and adaptation of the basidiomycete yeast, C. neoformans. We constructed three independent deletion mutants for YSA1, and analyzed their mutant phenotypes. We found that ysa1 mutants did not show increased sensitivity to reactive oxygen species-producing oxidative damage agents, such as hydrogen peroxide and menadione, but exhibited increased sensitivity to diamide, which is a thiol-specific oxidant. Ysa1 was dispensable for the response to most environmental stresses, such as genotoxic, osmotic, and endoplasmic reticulum stress. In conclusion, modulation of YSA1 may regulate the cellular response and adaptation of C. neoformans to certain oxidative stresses and contribute to the evolution of antifungal drug resistance.

• Journal of applied mathematics & informatics
• /
• v.6 no.2
• /
• pp.631-638
• /
• 1999

Sensitive testing has been widely employed for many years in connection with the development and evaluation explosives detonation devices and propellants. Perhaps its earliest and possibly most important implementation was in biological studies of dosage mortality and response to drugs. Recently sensitivity experiments has been employed in the evaluation of new materials subject to stress in various environments and in delineanation of unstable combustion regions in chemical propulsion systems. This paper discussed a sta-tistical development of sensitivity testing.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.160-167
• /
• 2001

Cracking in connote structures is one of the main issues of structural design next to ensuring the load-bearing capacity. Thermal analysis is used to prevent thermal mucking, but concrete properties are uncertain variable, and analysis results have uncertainty, too. In this study, sensitivity analysis is performed to investigate the effect of conductivity, specific heal and pouring temperature. The results show that lower conductivity and higher specific heat increase the maximum temperature and maximum tensile stress. The structure with internal restraint is mostly influenced by the change of conductivity and specific heat.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.174-181
• /
• 2007

This paper is concerned with the thermo-mechanical behavior of steel sheet for an auto-body including temperature dependent strain rate sensitivity. In order to identify the temperature-dependent strain rate sensitivity of SPRC35R, SPRC45E and TRIP60, uniaxial tensile tests are performed with the variation of the strain rates from 0.001/sec to 200/sec and the variation of environmental temperatures from $-40^{\circ}C$ to $200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained from the static tensile test and that at the intermediate strain rate is obtained from the high speed tensile test. Experimental results show that the variation of the flow stress and fracture elongation becomes sensitive to the temperature as the strain rate increases. It is observed that the dynamic strain aging occurs with TRIP60 at the temperature above $150^{\circ}C$. Results also indicate that the flow stress and tincture elongation of SPRC35R are more dependent on the changes of strain rates and temperature than those of SPRC45E and TRIP60.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.746-752
• /
• 2001

Design sensitivity analysis for nonlinear structural problems has been emerged in the last decade as a glowing area of engineering research. As a result, theoretical formulations and computational algorithms have already developed for design sensitivity of nonlinear structural problems. There is not enough research for practical nonlinear problems using multi-element, due to difficulties of implementation into FEA. Therefore, nonlinear response analysis for stiffened shell which consists of Mindlin plate and Timoshenko beam, was considered. Specially, it presents the backward-Euler method which is adopted to describe an exact yield state in the stress computation procedure. Then, design sensitivity analysis of nonlinear structures, particularly elasto-perfectly-plastic structure, is developed using direct differentiation method. The accuracy of the developed sensitivity analysis was compared with the central finite difference method. Finally, on the basis of above results, design improvement for stiffened shell is suggested.

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.167-169
• /
• 2011

The Saccharomyces cerevisiae S288c strain does not show haploid and diploid filamentous growth, and biofilm formation, because it has a flo8 nonsense mutation unlike ${\Sigma}1278b$ strain which has a FLO8 gene. During the heat stress experiments to investigate the role of ScKns1, LAMMER kinase in S. cerevisiae, we found that ${\Sigma}1278b$ strain revealed heat sensitivity at $37^{\circ}C$, a mild heat stress in contrast to S288c strain. We also found that the disruption of ScKns1 and the addition of sorbitol suppress heat sensitivity of ${\Sigma}1278b$ strain. These results suggest the possibility that Flo8 and ScKns1 may interact to transducer a signal for regulating heat stress through a novel signaling pathway.

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.