• Structural Engineering and Mechanics
• /
• v.67 no.5
• /
• pp.527-544
• /
• 2018

In this paper, the effect of homogenization models on stress analysis is presented for functionally graded plates (FGMs). The derivation of the effective elastic proprieties of the FGMs, which are a combination of both ceramic and metallic phase materials, is of most of importance. The majority of studies in the last decade, the Voigt homogenization model explored to derive the effective elastic proprieties of FGMs at macroscopic-scale in order to study their mechanical responses. In this work, various homogenization models were used to derive the effective elastic proprieties of FGMs. The effect of these models on the stress analysis have also been presented and discussed through a comparative study. So as to show this effect, a refined plate theory is formulated and evaluated, the number of unknowns and governing equations were reduced by dividing the transverse displacement into both bending and shear parts. Based on sinusoidal variation of displacement field trough the thickness, the shear stresses on top and bottom surfaces of plate were vanished and the shear correction factor was avoided. Governing equations of equilibrium were derived from the principle of virtual displacements. Analytical solutions of the stress analysis were obtained for simply supported FGM plates. The obtained results of the displacements and stresses were compared with those predicted by other plate theories available in the literature. This study demonstrates the sensitivity of the obtained results to different homogenization models and that the results generated may vary considerably from one theory to another. Finally, this study offers benchmark results for the multi-scale analysis of functionally graded plates.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.146-153
• /
• 2014

This study looks at the impact of psychological and physical factors of the working conditions on the health of workers depending on whether technology is used by such workers. The data used for the study is the third work environment survey. Out of 50,032 respondents, a total of 29,711 paid workers were used as analysis subjects. Although it was anticipated that the use of technology was a factor that hindered job autonomy and teamwork autonomy. However, the analysis results showed low levels of job autonomy and teamwork autonomy in the group that did not use technology. The study assumes a regression analysis model about work environment and work organizational practices of workspaces that have an impact on musculoskeletal complaints, stress symptoms and level of work satisfaction by controlling the social demographic variable that represents the level of individual sensitivity. As a result of the study, ergonomic risk had a significant effect on both groups that did or did not use technology with respect to stress symptoms, musculoskeletal complaints and level of work satisfaction. In particular, as workspace practices and work environment had an effect on the development of musculoskeletal complaints in the group that used machines, there is a need to improve such situation. The autonomous team work or level of job autonomy within the group that used technology may act as a risk factor to the health and welfare of workers. However, because it may also act as a buffer factor, there is a need for a change to reduce stress symptoms and increase the level of work satisfaction by improving autonomous team work and the level of job autonomy.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.338-351
• /
• 2018

This study was conducted in a long-term experimental forest in the central hardwoods region of southwestern Michigan to retrospectively examine the role of past forest management practices and climate on red oak (Quercus rubra L.) productivity. Initially, in 1971, plots within the experimental forest were treated separately with a clearcut and shelterwood regeneration harvest in an attempt to increase red oak regeneration. From 1987-1989, a new study was initiated within a portion of the clearcut and shelterwood plots to evaluate the effectiveness of additional oak crop tree release using mechanical and chemical applications. Cumulative diameter and mortality rates of 719 red oaks were monitored across the four silvicultural treatments: Clearcut-A (clearcut without additional release treatment), Clearcut-B (clearcut with additional release treatment), Shelterwood-A (shelterwood without additional release), and Shelterwood-B (shelterwood with additional release) plus an untreated control. Increment cores were obtained from red oak trees and neighboring competitor species. Tree-ring analyses (dendrochronology) were applied to examine the effect of these silvicultural treatments and climatic factors (temperature and precipitation) on red oak productivity. The results indicated that crop tree release following a clearcut or shelterwood harvest reduced mortality rates and thus increased survival of red oak. Red oak in control plots or plots only receiving the initial regeneration harvesting treatment and no additional competition release were negatively affected by climatic stress, which included summer moisture stress. In contrast, red oak in plots that received the competition release treatment from shade tolerant tree species not only had higher tree level productivity (i.e., tree basal area) and lower mortality rates, but were also relatively more resilient to climatic stress by showing limited or no associations between climate and growth.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.371-378
• /
• 2006

This study investigates the effects of the material properties and the fatigue behaviors in the SM490A material butt weld specimens due to the heat-treatment and the grinding. In the fatigue behavior, the heat-treatment affects the fatigue life. The S-N curves of both matrix specimen and butt weld specimen are reversed at some cycle by the existence or nonexistence of heat-treatment. The grinding on the bead makes the fatigue limit decrease in the all specimens. But the reinforcement removed, the fatigue limit increases at the high cycle. Also, this study investigates the fatigue life estimation by examining butt weld bead profiles. The butt weld beads, which are welded by semi-robot method, have non-uniform bead profiles described by $\theta,\;\rho$ and h. The stress concentration factors $K_t$, are changed by each different $\theta,\;\rho$ and h from 1.395 to 2.863. Hence, the sensitivity of $K_t$ is changed by each $\theta,\;\rho$ and h. As $\theta$ becomes lower and $\rho$ and h become higher, $K_t$ increases. The fatigue life can he estimated very closely for the AAY specimens without residual stress using only butt weld bead profiles. But, fur the AAN specimens with residual stress, the fatigue life must be estimated by considering both the weld bead profiles and the residual stress data.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.244-251
• /
• 2003

A two-dimensional BEM code, $FRACOD^{2D}$, was applied to simulate fracture initiation and propagation processes in a rock pillar during an in situ heater test of a rock pillar planned at the $\"{A}sp\"{o}$ Underground Rock laboratory of SKB, in Southern Sweden. To take the advantage of conventional BEM for simulating fracturing processes, but without efforts for domain integral transformation, a hybrid approach is developed to simulate the fracturing processes in rock pillar under coupled thermo-mechanical loading. The code FRACOD was used for simulating the fracture initiation and propagation processes with its boundary tractions reflecting the effects of the initial and redistributed thermomechanical stresses in the domain of interest at multiple excavation and heating steps were produced by a special algorithm of stress inversion, based on resultant thermo-mechanical stress fields at each excavation and heat loading step by a FEM code without considering fracturing processes. This hybrid approach can take the advantages of both types of numerical methods and avoids their shortcomings for fracturing process simulation and domain effects, respectively. In this paper, we present the hybrid approach for the stress, displacements, and fracturing processes at sequential excavation and heating steps of the in situ heater test as a predictive modelling, the formulation of the fracturing models and the predictive results. Two sections of borehole depth, 0.5 m and 1.5 m below the tunnel floor are considered. The pillar area is modelled with the FRACOD and the stress field produced by excavation and heating is transferred with corresponding boundary stresses. From the modelling results, the degree of fracturing and damage are evaluated for 120 days of heating. Dominated shear fracturing in the vicinity of the central pillar was observed from the models at both sections, but spalled area appears to be limited. Based on the modelling results, a sensitivity study for the effect of pre-existing fractures in the vicinity of the holes is also conducted, and the initiation and evolution of EDZ around the deposition holes are investigated using this particular numerical technique.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.230-230
• /
• 2017

About 200 rice varieties for irrigated and rainfed lowland ecosystems were released in the Philippines, which were bred for improving yield under favorable conditions. Root plasticity plays key roles in maintaining crop productivity under abiotic stressed conditions. We hypothesized that some of these varieties possess root plasticity traits in response to water stressed conditions. This study aimed to evaluate the root system development and dry matter production of 14 randomly selected rice varieties (6 irrigated lowland and 9 rainfed varieties) under progressive drought (PDR) and soil moisture fluctuations (SMF) stress conditions. Two experiments were done in rootbox and line source sprinkler systems (LSS). Each of the varieties was subjected to well-watered (WW), PDR and SMF conditions during vegetative stage in rootbox system while the same genotypes were subjected to different intensities of drought stress under LSS. Under rootbox system, PDR and SMF significantly reduced shoot dry matter production in all varieties relative to their WW controls. Among varieties, NSIC Rc238 (irrigated lowland) showed the least reduction in shoot dry weight (SDW) in both PDR (by 11.8%) and SMF (by 26.9%) conditions. Less reductions in SDW of NSICRc238 were partially attributed to the promotion of L-type lateral roots, thus increasing total lateral root length by 24.2% and 30.7% under PDR and SMF, respectively. In LSS, SDW of NSIC Rc238 under mild drought stress (16-21% soil moisture content (SMC) had 31.8% reduction relative to its WW control (${\geq}22%SMC$) and had lower sensitivity drought index. Compared with the IR64 susceptible check and NSIC Rc9 tolerant check, NSIC Rc238 had higher SDW by 90.8% and 38.6%, respectively. Furthermore, no rainfed lowland varieties included in the experiment performed well under different water stress treatments. The results implied that some other irrigated lowland rice varieties may also possess drought dehydration avoidance root plasticity traits under water-stressed growing environments.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.159-163
• /
• 2006

Background: Despite the enormous amount of basic research on neuropathic pain, there is the lack of an objective diagnostic test for complex regional pain syndrome (CRPS). The aim of this study was to evaluate the usefulness of cold stress thermography in the diagnosis of CRPS. Methods: The study involved 12 patients with CRPS type 1, according to the IASP criteria, who were compared with 15 normal healthy volunteers. All subjects underwent thermographic examination under baseline conditions at $21^{\circ}C$. A cold stress test (CST; $10^{\circ}C$ water for 1 minute) was then applied to both hands below the wrists, immediate, and after 10 and 20 minutes. Results: The temperature asymmetry between the patients with CRPS and the volunteers showed significant discrimination at the baseline and after a 20 minute recovery period from the CST. Among the study subjects having temperature asymmetry of both hands of less than $1^{\circ}C$ (8 out of 12 CRPS patients and 14 out of 15 volunteer), 7 (87.5%) of the 8 CRPS patients and 3 (21%) of the 14 volunteers showed a temperature difference of more than $1^{\circ}C$ after the 20 minute recovery period. The actual temperature values during the four periods did not discriminate between the patients with CRPS and the volunteers. Conclusions: Thermography, under the CST, could be a more objective test for the diagnosis of CRPS. A temperature asymmetry greater than $1^{\circ}C$ during the 20 minute recovery period following CST provides strong diagnostic information about CRPS, with both high sensitivity and specificity.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.129-138
• /
• 2008

The finite element method(FEM) was one of tools used to solve problem of previous Concrete Pavement and was applied to Korea Pavement Research Program Study. This study used the ABAQUS and the fortran analysis program to calculate the critical stress on jointed concrete pavement and compared and analyzed the results by using neural networks and linear regression model. In that case, which are not enough analysises by using FEM programs though many input variables, when the results of FEM with NN and linear regression models are compared, there are some differences. The other cases, which are reduced input variables and a lot of analysises each of them, results of Neural Networks(NN) and linear regression models are simulated to them of FEM. But, the result of NN is more exact than them of linear regression at the (0,0), (1,1). On the results of this study, it is suggested that the calculation of stress using NN is more compatible to Korea Pavement Research Program Study.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.1
• /
• pp.38-45
• /
• 2014

This study was performed to investigate the physiological responses of Oplopanax elatus by water condition. Drought stress was induced by withholding water for 26 days. The results show that $P_{N\;max}$, SPAD, gs, E and Ci were significantly decreased with decreasing of soil moisture contents. However, AQY and WUE were decreased slightly only at 26 day. This implies that photosynthetic rate is reduced due to an inability to regulate water and $CO_2$ exchange through the stomatal. According to JIP analysis, ${\Phi}_{PO}$, ${\Psi}_O$, ${\Phi}_{EO}$ and $PI_{ABS}$ were dramatically decreased at 21 day and 26 day, which reflects the relative reduction state of the photosystem II. On the other hand, the relative activities per reaction center such as ABS/RC, TRo/RC were significantly increased at 26 day. Particularly, Dio/RC and DIo/CS increased substantially under drought stress, indicating that excessive energy was consumed by heat dissipation. These results of chlorophyll a fluorescence show that the sensitivity changes photosystem II activity. Thus, according to the results, O. elatus was exhibited a strong reduction of photosynthetic activity to approximately 10% soil moisture contents, and JIP parameters could be useful indicator to monitor the physiological states of O. elatus under drought stress.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.679-687
• /
• 2008

The fatigue life of ship structure under cyclic loading condition is made up of crack initiation and propagation stages. For a welding member in ship structure, the fatigue crack propagation life is more important than the fatigue crack initiation life. To calculate precisely the fatigue crack propagation life at the critical welding location, the knowledge of the residual stress sensitivity on the fatigue strength is necessary. In this study, thermo elastic-plastic analysis was conducted in order to examine the effect of residual stress on the fatigue crack propagation life. Also the fatigue crack propagation lives considering residual stress were calculated using fatigue crack growth code, AFGROW, on the basis of fracture mechanics. AFGROW is widely used for fatigue crack growth predictions under constant and variable amplitude loading. The reliability of AFGROW on the fatigue of ship structure was confirmed by the comparison of the estimated results with the fatigue propagation test results.