• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.155-163
• /
• 2018

One of the major disadvantages of isogeometric analysis(IGA) is that local refinement is nearly impossible in a conventional manner because of the tensor product nature in NURBS. In this research, we investigate a local refinement scheme for isogeometric analysis, named multi-resolution approach where different resolutions are employed at each subdomain, using h-refinement relation to endow displacement compatibility on an interface of subdomains. Then, we develop shape sensitivity analysis possessing same compatibility condition as in the analysis. Numerical examples are shown to demonstrate the computational efficiency of the method in analysis especially stress concentration problem and accurate sensitivity results which is also compatible on the interface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.132-138
• /
• 2011

A micromachined silicon accelerometer capable of surviving and detecting very high accelerations(up to 200,000 times the gravitational acceleration) is necessary for a high impact accelerometer for earth-penetration weapons applications. We adopted as a reference model a piezoresistive type silicon micromachined high-shock accelerometer with a bonded hinge structure and performed structural analyses such as stress, modal, and transient dynamic responses and sensor sensitivity simulation for the selected device using piezoresistive-structural coupled-field analysis. In addition, structural optimization was introduced to improve the performances of the accelerometer against the initial design of the reference model. The design objective here was to maximize the sensor sensitivity subject to a set of design constraints on the impact endurance of the structure, dynamic characteristics, the fundamental frequency and the transverse sensitivities by changing the dimensions of the width, sensing beams, and hinges which have significant effects on the performances. Through the optimization, we could increase the sensor sensitivity by more than 70% from the initial value of $0.267{\mu}V/G$ satisfying all the imposed design constraints. The suggested simulation and optimization have been proved very successful to design high impact microaccelerometers and therefore can be easily applied to develop and improve other piezoresistive type sensors and actuators.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.469-476
• /
• 2017

This study analyzed consumers' preferences and price sensitivity to native chickens. A survey was conducted from Jan 6 to 17, 2014, and data were collected from consumers (n=500) living in Korea. Statistical analyses evaluated the consumption patterns of native chickens, preference marketing for native chicken breeds which will be newly developed, and price sensitivity measurement (PSM). Of the subjects who preferred broilers, 24.3% do not purchase native chickens because of the dryness and tough texture, while those who preferred native chickens liked their chewy texture (38.2%). Of the total subjects, 38.2% preferred fried native chickens (38.2%) for processed food, 38.4% preferred direct sales for native chicken distribution, 51.0% preferred native chickens to be slaughtered in specialty stores, and 32.4% wanted easy access to native chickens. Additionally, the price stress range (PSR) was 50 won and the point of marginal cheapness (PMC) and point of marginal expensiveness (PME) were 6,980 won and 12,300 won, respectively. Evaluation of the segmentation market revealed that consumers who prefer broiler to native chicken breeds were more sensitive to the chicken price. To accelerate the consumption of newly developed native chicken meat, it is necessary to develop a texture that each consumer needs, to increase the accessibility of native chickens, and to have diverse menus and recipes as well as reasonable pricing for native chickens.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.

• Agricultural and Biosystems Engineering
• /
• v.7 no.1
• /
• pp.27-41
• /
• 2006

Assessment of nitrogen and chlorophyll content from crop leaves can help growers adjust N fertilizer rates to meet the demands of the crop. Numerous researchers have presented their studies about spectral signature of plant leaves to characterize the plant features. However, interrelational review and summary were limited and a communication gap exists between the plant science and optical engineering. Understanding the mechanism of leaf interaction to electromagnetic radiation and factors affecting spectrophotometric measurements can enhance the foundation of optical remote sensing technologies. This paper provides extensive review of previous works in optical sensing and explains the basics of plant optics, spectral measurements for plant stress, factors that affect sensitivity to spectral analysis, and applications that deploy optical remote sensing technologies.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.7
• /
• pp.508-513
• /
• 1999

The response properties of quartz crystal coated with stearic acid LB films to organic gases were investigated by measuring the shift of resonant frequency. Stearic acid was used as a sensing material and deposited on the surface of quartz crystal using the Langmuir-Blodgett(LB) method. The effect of temperature on the quartz crystal coated with stearic acid LB films was also investigated by Scanning Maxwell-stress Microscopy(SMM). As a result, the sensitivity of the quartz crystal coated with LB films to organic gases is dependent on temperature, thickness of LB film and molecular weight of organic gas.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.227-230
• /
• 2009

In order to predict failure behavior of advanced high-strength steel sheets (AHSS) in hole expansion tests, damage model was developed considering surface condition sensitivity (with specimens prepared by milling and punching: 340R, TRIP590, TWIP940). To account for the micro-damage initiation and evolution as well as macro-crack formation, the stress triaxiality dependent fracture criterion and rate-dependent hardening and ultimate softening behavior were characterized by performing numerical simulations and experiments for the simple tension and V-notch tests. The developed damage model and the characterized mechanical property were incorporated into the FE program ABAQUS/Explicit to perform hole expansion simulations, which showed good agreement with experiments.

• Advances in nano research
• /
• v.9 no.3
• /
• pp.147-156
• /
• 2020

This research is related to nonlinear stability analysis of advanced microbeams reinforced by Graphene Platelets (GPLs) considering generic geometrical imperfections and thermal loading effect. Uniform, linear and nonlinear distributions of GPLs in transverse direction have been considered. Imperfection sensitivity of post-bucking behaviors of the microbeam to different kinds of geometric imperfections have been examined. Geometric imperfection is first considered to be identical as the first buckling mode, then a generic function is employed to consider sine-type, local-type and global-type imperfectness. Modified couple stress theory is adopted to incorporate size-dependent behaviors of the beam at micro scale. The post-buckling problem is solved analytically to derive load-amplitude curves. It is shown that post-buckling behavior of microbeam is dependent on the type geometric imperfection and its magnitude. Also, post-buckling load can be enhanced by adding more GPLs or selecting a suitable distribution for GPLs.

• Korea-Australia Rheology Journal
• /
• v.21 no.2
• /
• pp.83-89
• /
• 2009

Coating process plays an important role in information technology such as display, battery, chip manufacturing and so on. However, due to complexity of coating material and fast deformation of the coating flow, the process is hard to control and it is difficult to maintain the desired quality of the products. Moreover, it is hard to measure the coating process because of severe processing conditions such as high drying temperature, high deformation coating flow, and sensitivity to the processing variables etc. In this article, the coating process is to be re-illuminated from the rheological perspectives. The practical approach to analyze and quantify the coating process is discussed with respect to coating materials, coating flow and drying process. The ideas on the rheology control of coating materials, pressure and wet thickness control in patch coating process, and stress measurement during drying process will be discussed.

• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.49-65
• /
• 2001

This paper presents new compromise ALT plan which is applied to situations that true relationship between stress and parameters is not known exactly. The assumed failure distribution of this study is one of location-scale family, i. e., exponential, Weibull, and lognormal distributions which have been ones of the popular choices of failure distributions. The method of applying the stress is constant, and the censoring mechanism is Type I censoring. Compared with existing compromise plans under true simple linear model in terms of statistical efficiency, the efficiency of new compromise plan is better than the corresponding other compromise ones in most cases. For case when true model is quadratic, this plan can be used without any severe loss in statistical efficiency. The proposed new compromise ALT plan is illustrated with a numerical example and sensitivity analyses are conducted to study effects of pre-estimates of design parameters.