• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.759-767
• /
• 2014

This study examined the effect of Momordica charantia L. (bitter melon: BM) on lipid and hepatic antioxidative enzyme levels in diabetic rats. Diabetes mellitus was induced in male Sprague-Dawley rats by injection of streptozotocin (STZ), and rats were fed for 4 weeks with experimental groups divided into four groups: a normal control group, STZ-control and STZ-BM 5% & STZ-BM 10% treated groups. Levels of free fatty acids (FFA), high-density lipoprotein cholesterol (HDL-chol), triglycerides (TG) in plasma and malondialdehyde (MDA) & protein in liver, catalase (CAT), superoxide dismutase (SOD), glutathione-S-transferase (GST), and xanthine oxidase (XOD) were measured in liver cytosol. Level of HDL-chol significantly increased in the STZ-BM 5% diabetic group. TG & FFA levels were significantly higher in all diabetic groups compared to the control group. MDA and protein levels were significantly higher in the STZ-BM 5% group compared to all other experimental group. CAT level was higher in the supplementary group with BM compared to the STZ-control group, although the difference was not significantly different. SOD level was not significant in any experimental groups. GST level was significantly higher in the BM-treated groups compared to the STZ-control group. XOD level was significantly lower in the BM 5% group and significantly decreased in all experimental groups. These results show that supplementation of BM fruit powder may have beneficial effects on diabetic complications and damage caused by oxidative stress.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.211-222
• /
• 2011

In this paper a structural analysis of the PWR(pressurized water reactor) canister with 102cm diameter is carried out to evaluate the structural safety of the canister for the impact force occurring at the moment of collision with the ground in the falling plumb down accident from the carriage vehicle which may happen during the canister handling at the spent nuclear fuel disposal repository. For this, a rigid body dynamic analysis of the canister is executed to compute the impact force using the commercial CAE system, RecurDyn, and a nonlinear structural analysis is performed to compute stresses and deformations occurring inside the canister for this computed impact force using the commercial FEM code, NISA. From these analysis results, the structural safety of the canister is evaluated for the falling plumb down accident from the carriage vehicle due to the inattention during the canister handling at the repository. The rigid body dynamic analysis performed assuming the canister as a rigid body shows that the canister falls plumb down to the ground in two types. And also it shows that early collision impact force is the biggest one and following impact forces decrease gradually. The height of the carriage vehicle in the repository is assumed as 5m in order to obtain the stable structural safety evaluation result. The nonlinear structural analysis of the canister is executed for the biggest early impact force. The structural analysis result of the canister shows that the structural safety of the PWR canister is not secured for the falling plumb down accident from the moving carriage vehicle because the maximum stresses occurring in the cast iron insert of canister are bigger than the yield stress of the cast iron.

• Journal of Life Science
• /
• v.22 no.11
• /
• pp.1529-1537
• /
• 2012

In order to determine the effective concentration, 2, 7, and 14 brix black garlic extracts (BGE) were fed to restraint stressed rats and the lipid metabolism was analyzed. The dietary intake of the 14 brix BGE-fed group was $547.64{\pm}13.99$ g/4 weeks and it was significantly higher than that of the control group. The weight of all organs from the all BGE-fed groups showed no significant differences. While BGE concentration increased, BGE-fed groups tend to have low content of blood glucose. It was the lowest in the 14 brix BGE-fed group ($121.32{\pm}3.50$ mg/dl). Total cholesterol content was $54.54{\pm}1.63{\sim}65.84{\pm}2.61$ mg/dl. Total cholesterol content of the 14 brix BGE-fed group was the lowest and, in addition, lower than the normal group. Triglyceride content of serum showed the same tendency. HDL-cholesterol concentrations of the restraint stressed control (RSC) group were significantly higher than those of 7 and 14 brix BGE-fed groups. LDL and VLDL-cholesterol contents showed contrary results. GOT, GTP, and ALP activity of serum were lower when BGE concentration was higher. It is expected that BGE has a liver protective activity. In the liver, total lipids and triglyceride contents were significantly lower in BGE-fed groups than in the ISC group. However, total cholesterol content showed no significant difference between groups. TBARS content in liver of the 2 brix BGE-fed group was not significantly different than control, while 7 and 14 brix BGE-fed groups were lower than control. Glycogen content in the liver was only significantly lower in the 14 brix BGE-fed group than in the RSC group. Findings indicate that feed of BGE over 7 brix contributes to resolving the restraint-stressed rats by improving the lipid metabolism and liver protective activity.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.501-509
• /
• 2013

Formaldehyde (FA) is widely used in industries, and it is an indoor and outdoor pollutant. Exposure to FA may cause inflammation and respiratory oxidative stress. Studies have demonstrated that FA can cause cancer in animal models. During the regeneration process of injured starfish (Asterina pectinifera), several changes have been observed in the expression of cytokines. In particular, higher TGF-${\beta}1$ expression has been detected in arm cut starfish extract after eight days. The current study was designed to elucidate the in-vitro and the in-vivo pharmacological effects of starfish extract on FA exposure. We investigated the protective effects of intact starfish extract and arm cut starfish extract on an IMR-90 cell line and on mouse lung injury in response to FA exposure. In the presence of FA, inhalation of the arm cut starfish extract was associated with more promising cell proliferation, TNF-${\alpha}$, NF-${\kappa}B$ decrement, and $I{\kappa}-B{\alpha}$ increment. In the experimental group, the pulmonary structure of the arm cut starfish extract-treated group in the presence of FA exposure was similar to the control group, whereas the FA exposure group showed damage to the pulmonary structure. Moreover, the arm cut starfish extracts was more effective than the intact starfish extracts in terms of the expression of TNF-${\alpha}$, NF-${\kappa}B$, $I{\kappa}-B{\alpha}$, and surfactant protein A. The results obtained in this study demonstrate that arm cut starfish extracts are more effective in protecting pulmonary structure and function against FA exposure than intact starfish extracts.

• Food Science of Animal Resources
• /
• v.33 no.2
• /
• pp.258-267
• /
• 2013

This study was conducted to determine the antioxidative and neuroprotective effect of pig skin extracts (PS) and pig skin gelatin hydrolysates (LPS) using a human neuroblastoma cell line (SH-SY5Y). The extraction yield of PS was 3 fold higher than that of LPS. The protein content of PS was about 10 fold higher than that of LPS (p<0.05). Also LPS increased antioxidative activity dose dependently, and the activity was significantly higher than PS at all concentration (p<0.05). DPPH radical scavenging activity of LPS at 50 mg/mL was 92.97%, which was similar to $1{\mu}M$ vitamin C as a positive control. ABTS radical scavenging activity of LPS (20 mg/mL) was 89.83% and oxygen radical absorbance capacity of LPS at 1 mg/mL was $141.39{\mu}M$ Trolox Equvalent/g. No significant change of human neuroblastoma cells was determined by MTT test. Cell death by oxidative stress induced by $H_2O_2$ and amyloid beta 1-42 ($A{\beta}_{1-42}$) was protected by LPS rather than PS. Acetylcholine esterase was significantly inhibited, by up to 33.62% by LPS at 10 mg/mL. Therefore, these results suggest that pig skin gelatin hydrolysates below 3 kDa have potential to be used as anti-oxidative and neuroprotective functional additives in the food industry, while further animal test should be determined in the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.643-651
• /
• 2001

Paddlewheel-driven circulation in a culture pond has been simulated based on the depth integrated 2 dimensional hydrodynamic model. Acceleration by paddlewheel is expressed as shaft force divided by water mass discharged by paddlewheel blades. The model has been calibrated and applied to culture ponds as following steps:- i) The model predicted velocities at every 10 m along longitudinal direction from the paddlewheel. The model was calibrated comparing the results with the measured values at mass correction factor $\alpha$ and dimensionless eddy viscosity constant $\gamma$, respectively, in a range $15\~20$ and 6. ii) Wind shear stress was simulated under conditions of direction $0^{\circ}C,\;90^{\circ}C\;and\;180^{\circ}C$ and speed 0.0, 2.5, 5.0 and 7.5 m/s. Change rate of current speed was <$1\%$ at wind in parallel or opposite direction to the paddlewheel-driven jet flow, while $4\%$ at orthogonal angle. iii) The model was then applied to 2 culture ponds located at the Western coast of Korea. The measured and predicted currents for the ponds were compared using the regression analysis. Analysis of flow direction and speed showed correlation coefficients 0.8928 and 0.6782 in pond A, 0.8539 and 0.7071 in pond B, respectively. Hence, the model is concluded to accurately predict circulation driven by paddlewheel such that it can be a useful tool to provide pond management strategy relating to paddlewheel operation and water quality.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.278-286
• /
• 2003

Alcohol is well known agent which can damage the human tissues such as liver via stimulating lipid peroxidation. On the other hand, carotenoids in addition to vitamins A, C and I play important roles in protecting these oxidative damages as well as preventing the production of free radicals. This study was carried out to investigate the effect of dietary vitamin A on lipid peroxidation and antioxidants status in ethanol-treated rats. In the experiment, male Sprague-Dawley rats weighing 160~180 g were given a liquid diet containing 36% of total calories as ethanol for 7 weeks. The pair-fed control rats received an isocaloric amount of diet containing sucrose instead of ethanol on the following day Additionally, the liquid diet contained adequate amount of $\beta$-carotene, retinyl acetate or 13-sis-reinoic acid except vitamin A-deficient diet. The results obtained are as follows. The levels of plasma and hepatic lipid peroxide were increased after chronic ethanol feeding in rats. Retinyl acetate supplementation significantly reduced lipid peroxidation induced by ethanol feeding Glucose 6-phosphatase activity was significantly reduced in rats fed vitamin A-deficient diet with ethanol and alkaline phosphatase activity was significantly induced in rats fed 13-cis-reinoic acid diet with ethanol. Catalase and alcohol dehydrogenase activities did not show a consistent tendency in experiment groups. The hepatic antioxidant enzyme activities did not significantly changed by chronic ethanol feeding groups. The striking decrease in conversion of $\beta$-carotene to retinol was observed in rats fed a $\beta$-carotene diet with ethanol feeding The level of retinol and retinoic acid in plasma and liver was decreased after chronic ethanol administration Based on this result, these data suggest that ethanol feeding enhances oxidative stress especially in those fed a vitamin A-deficient diet, and vitamin A supplementation, especially, retinyl acetate intake can prevent enhanced lipid peroxidation and related damage to some extent.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.280-286
• /
• 1989

The present study was to examine the effects of light, temperature, and water stress on the photosynthesis and respiration rates and its seasonal changes in 3-Year-old Fraxinus rhynchophylla and Fraxinus mandshurica seedlings raised in pot in nursery. The results obtained are as follows: 1. The estimated light compensation points at which net photosynthesis approached zero were 35 and $28{\mu}Em^{-2}\;s^{-1}$ for F. rhyrachophylla and F. mandsdzurica leaves, respectively, The light saturation points occurred at $700{\mu}Em^{-2}\;s^{-1}$ in these species. 2. The maximum rates of net photosynthesis of leaves occurred at about $25^{\circ}C$ in F. rhynchophylla and at $20^{\circ}C$ in F. mandshurica. 3. The decrease in net photosynthetic rates of leaves began at -13 bars in F. rhynchophylla and -10 bars in F. mandshurica, and then its rates approached approximately zero at -23 bars in F. mandshurica and -29 bars in F. rhynchophylla. 4. The dark respiration rates of leaves were similar from $10^{\circ}C$ to $40^{\circ}C$ between these species, Also these increased from -10 bars to -28 bars, and then decreased remarkably in these species. 5. The net photosynthetic rates of leaves of F. mandshurica were higher than those of F. rhynchoplaylla until June, and after that lower than F. rhynchophylla. The dark respiration rates of leaves of F. rhynchophylla were higher than those of F. mandshurica from June to August, and After that similar between these species. 6. The respiration rates of stem and root were highest in April during the growing season. These values of F. rhynchophylla were slightly higher than those of F. mandshurica throughout the growing season.