• 콘크리트학회논문집
• /
• 제28권1호
• /
• pp.41-48
• /
• 2016

본 연구는 두 종류의 수축저감제를 혼입한 변형경화형 시멘트 복합체(SHCC)의 압축, 인장 및 휨 특성을 평가하기 위하여 계획되었으며, 재령과 수축저감제의 종류 및 혼입률을 변수로 진행되었다. SHCC는 설계기준압축강도 50 MPa이며, 섬유는 PVA 섬유를 2.2% 혼입하였다. 배합에 혼입된 수축저감제는 상변이 물질로 수화현상으로 발생되는 열을 흡수 또는 방출하여 급격한 수축 및 팽창을 제어하는 물질이다. 수축저감제의 혼입에 대한 영향은 선변형 길이변화 실험과 압축, 인장 및 휨 성능의 측면에서 평가되었으며, 수축저감제를 혼입할 경우 초기 재령에서의 수축량이 감소되었다. 또한 수축저감제를 혼입함에 따라 균열 분산 성능과 인장 및 휨 성능이 개선되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권4호
• /
• pp.528-534
• /
• 2000

Sixteen specific pathogen free 4-wk-old crossbred weanling pigs were allotted into a $2{\times}2$ factorial design to evaluate chromium picolinate (CrPic) on growth and physiological responses. Two factors included (1) no Cr or 400 ppb Cr supplementation from chromium picolinate and (2) lipopolysaccharide (LPS) injection on day 21 (d 21) and 35 (d 35) compared to saline application. Plasma samples and rectal temperature were obtained from all piglets before (h 0) and at 2 h (h 2), 4 h (h 4), 8 h (h 8), and 24 h (h 24) after LPS injection ($200{\mu}g/kg$ BW, intraperitoneally). The rectal temperature on d 21 was significantly decreased (p<0.05) of about $0.36^{\circ}C$ with Cr supplementation before LPS injection. After LPS injection, the daily gain of piglets was decreased during d 35-38. Supplementation of Cr had no effect in general on growth performance particularly after LPS injection. The plasma glucose, triglycerides and urea nitrogen concentrations were changed in different ways after LPS injection. Plasma cortisol level was significantly elevated at h 2 after LPS injection on d 21 and d 35. The supplementation of Cr in the diet can delayed plasma cortisol release on d 35. The results suggest that 400 ppb Cr supplementation from CrPic may modulate the physiological response during immune stress in weanling pigs.

• 비파괴검사학회지
• /
• 제7권2호
• /
• pp.42-47
• /
• 1988

이상의 결과를 요약하면 다음과 같다. 1) 초음파 C-scan 법에 의하여 층간분리, 기지균열 등의 손상 정도, 크기 및 형태의 판별이 가능하며 충격손상은 주로 섬유의 주축방향으로 성장한다. 2) 복합재료의 인장파괴시 적층구조에 따라 상이한 AE 양상을 나타내며 이 원인은 파괴 mode의 차이에 기인한다. 3) 섬유의 파단은 기지파단의 경우 보다 강력한 AE activity를 나타내며 peak amplitude의 분포를 분석하여 파괴 mode의 해석이 가능하다. 4) 복합재료의 파괴강도는 적층구조, 충격 손상 등에 영향을 받으며 응력파 계수(SWF)의 측정에 의해 정성적 평가가 가능하다.

• Biomolecules & Therapeutics
• /
• 제21권6호
• /
• pp.435-441
• /
• 2013

Emodin, a naturally occurring anthraquinone derivative isolated from Polygoni cuspidati radix, has several beneficial pharmacologic effects, which include anti-cancer, anti-diabetic, and anti-inflammatory activities. In this study, the authors examined the effect of emodin on the production of proinflammatory cytokines, such as, tumor necrosis factor (TNF)-${\alpha}$ and interleukin (IL)-6, in mouse bone marrow-derived mast cells (BMMCs) stimulated with phorbol 12-myristate 13-acetate (PMA) plus the calcium ionophore A23187. To investigate the mechanism responsible for the regulation of pro-inflammatory cytokine production by emodin, the authors assessed its effects on the activations of transcriptional factor nuclear factor-${\kappa}B$ (NF-${\kappa}B$) and mitogen-activated protein kinases (MAPKs). Emodin attenuated the nuclear translocation of (NF)-${\kappa}B$ p65 and its DNA-binding activity by reducing the phosphorylation and degradation of $I{\kappa}B{\alpha}$ and the phosphorylation of $I{\kappa}B$ kinase B (IKK). Furthermore, emodin dose-dependently attenuated the phosphorylations of MAPKs, such as, extracellular signal-regulated kinase 1/2 (ERK1/2), p38 MAP kinase, and the stress-activated protein kinases (SAPK)/c-Jun-N-terminal kinase (JNK). Taken together, the findings of this study suggest that the anti-inflammatory effects of emodin on PMA plus A23187-stimulated BMMCs are mediated via the inhibition of NF-${\kappa}B$ activation and of the MAPK pathway.

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.121-126
• /
• 2005

건축구조물이나 합 등의 구조물이 부등침하의 영향으로 기울어지게 되는 것은 그리 드문 현상이 아니다. 그동안 구조물의 기울기를 감소시키기 위한 다양한 공학적인 해결방안이 시도되어 왔는데, 그 가운데는 soil extraction 공법도 포함되어 없다. 본 논문에서는 최신의 로보트 굴착장비를 이용한 2개의 원심모형실험을 실시하여 soil extraction공법을 이용하여 기울어진 건물의 경사를 감소시키는 데 있어서의 주된 요소에 대한 연구를 실시하였다. 원심모형실험에서는 모형토조가 고속으로 회전하는 가운데 로보트를 이용하여 기울어진 건물의 주변에 구명을 천공하였다. 지반에 구멍을 천공함으로 지중응력의 감소를 유도하여 건물의 기울기를 성공적으로 감소시킬 수 있었다. 원심모형실험을 통해서 분석된 천공의 순서, 지반의 밀도 및 배열 등이 건물의 기울기를 감소시키는 정도에 대하여 심도 있는 연구를 실시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.2004-2006
• /
• 1996

A thermally driven polysilicon micro actuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS (tetracthylorthosilicate) as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE (vapor phase etching) process was also used as an effective release method for the elimination of sacrificial TEOS layer. The thickneas of polysilicon is $2{\mu}m$ and the lengths of active and passive polysilicon cantilevers are $500{\mu}m$ and $260{\mu}m$, respectively. The actuation is incurred by die thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon micro actuator was experimentally conformed as large as $21{\mu}m$ at the input voltage level of 10V and 50Hz square wave. The actuating characteristics are investigated by simulating the phenomena of heat transfer and thermal expansion in the polysilicon layer. The displacement of actuator is analyzed to be proportional to the square of input voltage. These micro actuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as micro relay, which requires large displacement or contact force but relatively slow response.

• 한국터널지하공간학회 논문집
• /
• 제9권1호
• /
• pp.83-89
• /
• 2007

터널 굴착은 응력해방을 발생시키기 때문에 연약한 지반에서의 터널 굴착 시에는 막장의 안정성 확보가 무엇보다도 중요한 사안으로 대두되고 있다. 이에 대한 대책 공법 중 굴착대상 막장면을 일정한 강성을 가진 강봉이나 유리섬유 파이프를 이용하여 선행 보강하는 페이스 볼트 공법이 적용되고 있다. 본 연구에서는 이러한 페이스 볼트를 이용한 막장 보강공법의 적용성을 검토하기 위해 페이스 볼트 공법이 필요한 연약한 지반에서 타설 되는 볼트의 개수를 0, 20, 40, 60, 80, 100개의 6가지 Case와 길이를 0.5D (2가지), 1.0D, 1.5D, 2.0D의 5가지 Case에 관하여 $FLAC^{3D}$ Ver.2.1을 이용해 3차원 연속체 해석을 실시하였다.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.381-390
• /
• 1990

The purpose of this study was to evaluate the effects of heat treatment on mechanical properties in $0.016^{{\prime}{\prime}}{\times}0.022^{{\prime}{\prime}}$ blue Elgiloy wires and to measure the amounts of nickel and chromium released from the wires in artificial saliva. Ultimate tensile strength, yield strength and elongation were measured with universal testing machine (Instron). and the amounts of nickel and chromium released from the sample were measured with atomic absorption spectrophotometer after one week immersion in the artificial saliva. Ultimate tensile strength and yield strength were progressively increased below $1000^{\circ}F$, but elongation was decreased. And the results were reversed above $1100^{\circ}F$. After heat treatment of the sample for 9 minutes at $1000^{\circ}F$, the maximum tensile strength and yield strength were $213.6kg/mm^2$, $140.1kg/mm^2$, respectively. Both tensile strength and yield strength were decreased progressively above $1100^{\circ}F$. Elongation was appeared the minimum value (8.6%) after heat treatment for 9 minutes and 12 minutes at $1000^{\circ}F$. There was a pronounced increase in nickel and chromium liberation with increasing time and temperature. The maximum amounts of nickel and chromium released form the sample were $4.947{\mu}m/cm^2$, $3.088{\mu}g/cm^2$, respectively after heat treatment for 12 minutes at $1300^{\circ}F$. Heat treatment is applied to orthodontic wires, especially cobalt-chromium alloys, for the purpose of stress-relievning and hardening. When the heat-treatment of orthodontic wires, the heating procedure should be well controlled in order to have no effect on corrosion resistance and mechanical properties.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.640-645
• /
• 2010

This paper describes the power generating property of hydrothermally grown ZnO nanorods on a flexible polyethersulfone (PES) substrate. The piezoelectric currents generated by the ZnO nanorods were measured when bending the ZnO nanorod by using I-AFM, and the measured piezoelectric currents ranged from 60 to 100 pA. When the PtIr coated tip bends a ZnO nanorod, piezoelectrical asymmetric potential is created on the nanorod surface. The Schottky barrier at the ZnO-metal interface accumulates elecntrons and then release very quickly generating the currents when the tip moves from tensile to compressed part of ZnO nanorod. These ZnO nanorods were grown almost vertically with the length of 300-500 nm and the diameter of 30-60 nm on the Ag/Ti/PES substrate at $90^{\circ}C$ for 6 hours by hydrothermal method. The metal-semiconductor interface property was evaluated by using a HP 4145B Semiconductor Parameter Analyzer and the piezoelectric effect of the ZnO nanorods were evaluated by using an I-AFM. From the measured I-V characteristics, it was observed that ZnO-Ag and ZnO-Au metal-semiconductor interfaces showed an ohmic and a Schottky contact characteristics, respectively. ANSYS finite element simulation was performed in order to understand the power generation mechanism of the ZnO nanorods under applied external stress theoretically.