• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3931-3943
• /
• 2014

국내의 산업단지는 노후화와 환경문제 등으로 인하여 점점 더 경쟁력을 상실하고 있는 실정이다. 첨단산업단지로의 재편을 위해 공공 및 환경디자인의 질적 향상과 경쟁력 강화를 위한 방향성 정립이 시의적으로 필요하다. 본 연구는 서울디지털산업단지의 이용자 만족도에 영향을 미치는 계획요인을 PLS 회귀모형을 통해 규명하고자 하였다. 분석결과, 총 32개의 계획요인 중 중요도(VIP)값이 1.0 이상으로 매우 의미 있는 디자인 계획요인이 12개로 나타났으며, 0.9~1.0 사이의 비교적 중요한 계획요인이 8개로 도출되었다. 이들 계획요인은 디자인개선사업 시행 시 정량적 우선순위를 가늠할 수 있는 전략적 디자인 계획요인으로 판단할 수 있으며, 서울디지털산업단지의 경쟁력 강화에도 도움이 될 것으로 사료된다.

• 지역사회간호학회지
• /
• 제31권2호
• /
• pp.179-188
• /
• 2020

Purpose: The purpose of this study is to identifying factors influencing organizational commitment of nurses in Korean Red Cross Blood Center (KRCBC). Methods: A cross sectional survey was conducted for 224 nurses who worked for more than three months in KRCBC. Data were collected using a structured questionnaire from August 28 to September 20, 2018. Data were analyzed using independent t-test, Mann-Whitney U test, one-way ANOVA, Pearson's correlation coefficient, and hierarchical multiple regression analysis with SPSS (ver. 23.0). Results: The mean score of organizational commitment was 3.37±0.52 on a scale of 5 points, the mean of positive psychological capital was 3.51±0.51, communication ability score was 3.60±0.48, and social support score was 3.68±0.57. The factors influencing organizational commitment of nurses in KRCBC were social support (β=.41, p<.001), job satisfaction (β=.27, p<.001), and total length of employment in KRCBC (β=.19, p=.016). The model explained 36.1% of the organizational commitment of the nurses. Conclusion: It is necessary to develop an organizational commitment program for strengthening social support and job satisfaction to improve organizational commitment of nurses in KRCBC. Such a program is eventually expected to improve the quality of nursing care of nurses with a short career in KRCBC.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.819-838
• /
• 2013

This paper summarises the results of an experimental study to investigate the flexural behaviour of reinforced concrete beams strengthened using carbon-fibre reinforced polymer (CFRP) laminate in four-point bending. The experimental parameters included are the reinforcing bar ratio ${\rho}_s$ and preload level. Four bar ratios were selected (${\rho}_s=0.13$ to 0.86%), representing the section of two longitudinal tensile reinforcements, with diameters of 8, 14, 16, and 20 mm in order to reveal the effect of bar ratio on failure load and failure mode. Eight beams that could be considered "full-scale" in size, measuring 200 mm in width, 400 mm in total height and 2300 mm in length, were tested. Three beams were selected with different bar ratios (${\rho}_1$, ${\rho}_2$, ${\rho}_3$), and considered as control specimens (without ), while three other beams identical to the control beams with the same CFRP laminates ratio and a seventh beam with ${\rho}_{min}$ (the lowest bar ratio) were also used. In the second part of the study, two beams with the bar ratio ${\rho}_2$ were preloaded at two levels, 50 and 100% of their ultimate loads, and then repaired. This experimental investigation was consolidated using an analytical model. The experimental and analytical results indicate that the flexional capacity and stiffness of strengthened and repaired beams using CFRP laminate were increased compared to those of control beams, and the behaviour of repaired beams was nearly similar to the undamaged and strengthened beams; unlike the ductility of strengthened beams, which was greatly reduced compared to the control.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.38-58
• /
• 2004

The regain of independent ambulatory ability is a important goal in the rehabilitation program of hemiplegic patient. Not only the function of lower extremity muscles, but also trunk muscles which stabilize extremities and pelvis, are important factors in normal gait. Therefor, it is necessary to develop an effective program which can improve muscle strength and symmetric activity of trunk muscles. The purpose of this study was to evaluate the influence of trunk muscle strengthening by forceful respiratory exercise on the gait asymmetry ratio in hemiplegic patient. 45 Hemiplegic patients due to stroke was randomized in 3 groups, forceful expiratory training(FET), forceful inspiratory training(FIT) and control group. In the experimental groups, ordinary physical therapy with forceful expiratory training and forceful inspiratory training for 20 minutes duration 3 times per week for 6 weeks were respectively performed. In the control group, only ordinary physical therapy was done. Before and after experiments, temporal-spatial gait parameters was measured in all patients. The data of 28 patients who carried out the whole experimental course were statistically analysed. The results of these experiment are as follows : 1. In comparison of difference of single support time asymmetry ratio among 3 groups, the FET group was significantly decreased than the control group (p<.05). 2. In comparison of difference of step length asymmetry ratio among 3 groups, the FIT group was significantly decreased than the control group (p<.05). Based on these results, it is concluded that the forced respiratory exercise program for 6 weeks can be improve the gait asymmetry ratio in hemiplegic patients. Therefore, the forced respiratory exercise is useful to improve the walking ability in hemiplegic patients. Since this study dealt only with the patients who could walk more than 3 meters in distance on floor independently, the further study for evaluating the influence of the forceful respiratory exercise on patients with acute stage stroke and also the development in various methods of use are expected.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.310-320
• /
• 2007

Statement of the problem. The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured acrylic resin using glass fibers, have been suggested over the years. But problems such as poor workability, rough surface, poor adhesion of glass fiber resin complex are not solved yet. Purpose. The aim of the present study was to investigate the effect of short glass fibers on the transverse strength of heat-polymerized denture base acrylic resin and roughness of resin complex after abrasion test. Material and methods. To avoid fiber bunching and achieve even fiber distribution, glass fiber bundles were mixed with acrylic resin powder in conventional mixer with a non-cutting blade, to produce the glass fiber($10{\mu}m$ diameter, 3mm length, silane treated) resin composite. Glass fibers were incorporated at 0%, 3%, 6% and 9% by weight. Transverse strength were measured. After abrasion test, surface roughness was evaluated and scanning electron microscope view was taken for clinical application. Results. 1. 6% and 9% incorporation of 3mm glass fibers in the acrylic resin enhanced the transverse strength of the test specimens(p<0.05). 2. Before abrasion test, incorporation of 0%, 3%, 9% glass fiber in the resin showed no dirrerence in roughness statisticaly(p>0.05). 3. After abrasion test, incorporation of 0%, 3%, 6% glass fiber in the resin showed same surface roughness value statistically(p>0.05). 4. In SEM, surface roughness increased as the percentage of the fibers increased. 5. In the areas where glass fiber bunchings are formated, a remarkably high roughness was noticed. Conclusion. 6% and 9% addition of silane-treated short glass fibers into denture base acrylic resin increased transverse strength significantly. Before and after abrasion test, incorporation of 0%, 3%, 6% glass fiber in the resin showed same surface roughness value statistically.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.310-323
• /
• 2018

In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.

• Structural Engineering and Mechanics
• /
• 제67권2호
• /
• pp.207-217
• /
• 2018

In past years, numerous problems have vexed engineers with regard to buckling, corrosion, bending, and overloading in damaged steel structures. This article sets out to investigate the possible effects of carbon fiber reinforced polymer (CFRP) and steel plates for retrofitting deficient steel square hollow section (SHS) columns. The effects of axial loading, stiffness, axial displacement, the position and shape of deficient region on the length of steel SHS columns, and slenderness ratio are examined through a detailed parametric study. A total of 14 specimens was tested for failure under axial compression in a laboratory and simulated using finite element (FE) analysis based on a numerical approach. The results indicate that the application of CFRP sheets and steel plates also caused a reduction in stress in the damaged region and prevented or retarded local deformation around the deficiency. The findings showed that a deficiency leads to reduced load-carrying capacity of steel SHS columns and the retrofitting method is responsible for the increase in the load-bearing capacity of the steel columns. Finally, this research showed that the CFRP performed better than steel plates in compensating the axial force caused by the cross-section reduction due to the problems associated with the use of steel plates, such as in welding, increased weight, thermal stress around the welding location, and the possibility of creating another deficiency by welding.

• PNF and Movement
• /
• 제12권4호
• /
• pp.243-248
• /
• 2014

Purpose: The transverse abdominis and themultifidus muscle are located in the core. They surround one's trunk and help in body stabilization. Specifically, they control spine articulation to maintain posture and balance. Therefore, weakened deep muscle in the trunk may cause spinal malalignment. This study aims to compare the correlation between the thickness of the transverse abdominis and the multifidus muscle and the spine alignment among college students in their 20s. Methods: This study measured the thickness of the transverse abdominis and the multifidus muscle of 42 healthy college students in their 20s using ultrasonic waves. The thickness of the muscle was measured for the length of the cross-section except for fascia. The thickness of the left and right muscles was measured, and the mean value was calculated. As the thickness of the transverse abdominis can increase because of pressure during exhalation, it was measured at the last moment of exhalation. Spinal alignment was measured by the kyphosis angle, lordosis angle, pelvic tilt, trunk inclination, lateral deviation, trunk imbalance, and surface rotation using Formetric III, which is a three-dimensional imaging equipment. They were measured for three times, and the mean values were calculated. The general characteristics of the subjects were analyzed using descriptive statistics. The correlations between each factor were analyzed using Pearson's correlation analysis. Results: The transverse abdominis showed asignificant correlation with trunk inclination (p<.05). The multifidus muscle showed a significant positive correlation with pelvic tilt and a negative correlation with surface rotation (p<.05). Conclusion: The thickness of transverse abdominis and the multifidus muscle appears to influence spinal alignment. Specifically, the multifidus muscle, which plays an important role on the sagittal plane, influences surface rotation, thus making it an important muscle for scoliosis patients. Therefore, a strengthening training program for the transverse abdominis and the multifidus muscle is necessary according to specific purposes among adults with spinal malalignment.

• 지역사회간호학회지
• /
• 제32권2호
• /
• pp.175-185
• /
• 2021

Purpose: Influenza immunization among health personnel is of particular importance given their elevated risk of influenza infection, role in transmission and influence on patients' immunization status. The purpose of this study is to identify factors associated with the influenza vaccination intention among health personnel based on the theory of planned behavior. Methods: The research was a cross-sectional, descriptive design using questionnaires. The participants were 131 health personnel in five general hospitals in two cities in South Korea. The data were analyzed using descriptive statistics, t-test, ANOVA and multiple regression with the SPSS 26.0 program. Results: There were statistically significant differences in influenza vaccination intention according to the high-risk group in the family, occupation, length of employment, and influenza vaccination status within a year. The influenza vaccination intention of these health personnel showed significant positive correlations with attitude, subjective norms, and perceived behavioral control towards influenza vaccination. Multiple regression analysis for influenza vaccination intention revealed that the significant predictors were attitude, subjective norms, influenza vaccination within a year and physician in occupation. These factors explained 41.4% of the variance. Conclusion: The results suggest a need to strengthen attitude and subjective norms. The findings also suggest that their characteristics through influenza vaccination status within a year and occupation should be considered for tailored interventions related to the intention. Furthermore, it is necessary to develop programs strengthening attitude and subjective norms to enhance influenza vaccination intention among health personnel.

• Journal of Korea Trade
• /
• 제26권3호
• /
• pp.23-44
• /
• 2022

Purpose - Recent issues such as vessel enlargement, strengthening of environmental regulations, and port smartization are expected to increase costs and intensify competition in the port industry. In the new normal era, when external growth has reached its limit, the efficient operation of ports is becoming indispensable for achieving sustainable growth. This study aims to identify the determinants of inefficiency by examining the cost structure and efficiency of container terminals in Korea and furthermore propose the political implications to derive the maximization of efficiency. Design/methodology - This study estimates the cost function of container terminal operators and identifies the efficiency of container terminals using stochastic cost frontier (SCF) in the first stage. In the second step, the SCF results are compared with the data envelopment analysis (DEA). Last, this paper proposes efficiency determinants on container terminal operation to establish appropriate strategies. Out of the 29 container terminal operators in South Korea, 13 operators participated in the survey. The translog cost function was estimated utilizing a total of 116 observations collected over the 2007-2017 period. Findings - Empirical analysis shows that economies of scale exist in Korea's container ports, which provides a rationale for the government's policy to establish the global terminal operator by integrating small terminal operators to enhance competitiveness. In addition, as a result of the determinants analysis, container throughput, weight of direct employment costs, and labour cost share have positive effects on improving cost efficiency, while inefficiency increases as the length of quay increases. More specifically, cost efficiency improves as the proportion of direct employment costs to outsourcing service costs increases. Originality/value - This study contributes to analyzing the inefficiency factors of container terminals through efficiency analysis with respect to a cost function. In addition, this study proposes the practical and political implications, such as establishing a long-term manpower pool, the application of the hybrid liner terminal system, and the construction of a statistical data system, to improve the cost inefficiency of terminal operators.