• Journal of Science Education
• /
• v.41 no.1
• /
• pp.80-97
• /
• 2017

The purpose of this study was to develop understanding-oriented materials based on backward course design model and analyze their effects on 'biology and environment' unit of elementary school science. Backward Design starts from a specification of learning outcomes and decisions on methodology and syllabus are developed from the learning outcomes. This method has a strength maintaining consistency between educational contents-evaluation-learning activities and also promoting student's authentic understanding. The 78 students 6th graders participated in this experiments. Data was collected using project activities, the science academic emotion scale and academic achievement. The collected data was analyzed by t-test and ANCOVA analysis using the SPSS 23 statistical program. The following major conclusions were drawn on the basis of data analysis. First, the experimental group showed a relatively accurate understanding of the contents of science but they could not produce creative output in two project activities. Second, the interaction effect of the instruction based on backward curriculum design and science academic emotion was not significant statistically. Third, the experimental group showed a significant improvement in the academic achievement of 'biology and environment' unit.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.205-209
• /
• 2014

Medical polymers require sterilization and must be able to maintain material properties for a specified shelf life. Sterilization can be achieved by using gamma or e-beam exposure. In this study, accelerated aging tests of poly(ether-block-amide) (PEBA) copolymer samples is presented. PEBA copolymer samples with different polyether content that result in Shore hardness of 35D to 72D, were sterilized using e-beam radiation followed by accelerated aging at $55^{\circ}C$. E-beam sterilization effect on molecular weight and mechanical property has performed and analyzed. The average molecular weight significantly reduced as a result of ageing. The enlarged proportion of low molecular weight chains in the aged samples is consistent with the generation of degradation products produced by oxidative chain scission. Also E-beam materials have shown decreased tensile strength and elongation. Overall, this study demonstrated that the medical grade PEBA was significantly affected by radiation exposure over aging time, particularly at high irradiation doses. For medical use in case of radiation sterilization required, it is recommended to avoid Pebax material. If Pebax material must be in use for medical device, recommend to use alternate sterilization method such as Ethylene Oxide sterilization.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.899-904
• /
• 2009

We purified crude urushiol from natural lacquer produced in Korea, China, and Japan and then isolated several urushiol congeners known to induce allergic reactions. The 3 major kinds of urushiol congeners that were isolated and purified were RV-l (C$_{21}$H$_{34}$O$_2$, M.W. 314.462), RV-2 ((C$_{21}$H$_{32}$O$_2$, M.W. 316.240) and RV-3 ((C$_{23}$H$_{34}$O$_2$, M.W. 342.515), occupying 80% of total crude urushiol. The content of RV-l was the highest in natural lacquer from China at 70.07%, and was the lowest in that from Japan at 62.38%. However, the content of RV-2 in natural lacquer from Japan was 9.25%, 2$\sim$3 times higher than those from Korea (4.28%) and China (3.09%). As an allergy inducing character, RV-l had strong inducing power and durability in the primary stage, showing slow recovery. RV-2 had weak power in the primary stage and also showed slow recovery. Although RV-3 had comparatively weak power at the primary stage, it induced the strongest allergy contact dermatitis after 48 hr. However, it recovered to nearly the same level as control group 72 hr after sensitization time. Accordingly, we found out that RV-1 is the most influential of urushiol congeners in inducing allergic reactions, natural lacquer from China having the most inducible strength and slowest recovery compared to those from Korea and Japan.

• The Korean Journal of Quaternary Research
• /
• v.25 no.1
• /
• pp.15-30
• /
• 2011

Three sediment cores from two different locations (UJ-03 and UJ-12 cores of valley sediment in Paju area, and CL-4 core of wetland sediment in Cheollipo area) along the western Korean Peninsula yield crucial information on the timing and spatial pattern of century-scale climate changes and subsequent surficial responses during the Holocene. In Paju area, the sediments included abundant coarse-grained sediment (coarse sands and pebbles) from 7100 to 5000 cal. yrBP, total organic carbon (TOC) values showed a marked increase from 5000 to 2200 cal. yrBP, several intermittent depositional layers were observed from 2200 cal. yrBP. In Cheollipo area, lake environment developed from 7360 to 5000 cal. yrBP, the deposition of organic materials increased from 5000 to 2600 cal. yrBP, peatland formed from 2600 cal. yrBP. The two patterns of surficial responses to the climate changes through the Holocene are different to each other. This might be due to the dissimilarity in geomorphic conditions. However, the approximate simultaneity of environmental changes in two areas shows that they both can be correlated to the major climate changes. Two areas which have undergone significant changes indicated that the hydrological factors including precipitation and strength of water flow were most responsible for the landscape and geomorphic evolutions. Although the upwards trend in relative sea-level also played a primary role for environmental changes in coastal area (Cheollipo area), detailed studies have still to be undertaken.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.467-472
• /
• 2011

This study investigated illite/polypropylene (PP) composite filament formation via melt-spinning and evaluated their physical properties to prepare functional fibers using natural materials. When composite filaments were formed, the composite filaments exhibited smaller fiber diameters compared to that of neat PP filament because of the lubricant effect of illite induced by its layered structure. Moreover, fluorination effect increased interfacial affinity and dispersion in the polymer, resulting in smaller diameter of fluorinated illite/PP composite filament, which was 2/3 of the neat PP filament diameter. Addition of raw and fluorinated illite improved thermal stability of illite/PP composite filament. Raw illite/PP composite filament cannot be used for a practical application, because it broke during drawing process, whereas the fluorinated illite/PP composite filament can be used for a practical application, because it exhibited similar tensile strength of the neat PP filament and 50% increased modulus. Even with improved illite/PP interfacial affinity and illite dispersion in the polymer, illite/PP composite filament formed microcomposite, because non-expandable illite had strongly bound layers, resulting in only a little illite exfoliation and PP intercalation into illite.

• Convergence Security Journal
• /
• v.24 no.2
• /
• pp.181-188
• /
• 2024

Amid global geopolitical crises that are heightening tensions worldwide, the importance of national security is being reevaluated. Consequently, South Korea is gaining attention in the global defense market due to its superior technology, competitive pricing, and rapid delivery capabilities. The increasing international demand for defense materials offers opportunities for the development of the domestic defense industry and has the potential to lead to long-term defense strategies and an expansion of exports. In particular, the development of future advanced weapons systems and the expansion of defense exports are likely to be possible through a deep understanding of the international political and economic situation and proactive defense diplomacy. This study analyzes the impact of current global geopolitical crises on Korea's defense industry and presents effective strategies based on these findings, including innovative improvements to defense acquisition systems and the discovery of overseas defense cooperation partners to strengthen defense exports. This strategic approach aims to balance domestic consumption with exports, enhance military strength, and improve the country's standing in the international community. Therefore, efforts are needed to ensure the sustainable growth of the defense industry, enabling South Korea to achieve economies of scale and play a pivotal role in the global defense industry.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.129-140
• /
• 2007

A major purpose of this study is to develop a drainage system that can quickly drain water penetrated into pavement layers to mitigate pot holes which is one of the major distress types in bridge deck pavements. This system can be established by applying a thin drainage layer between waterproof and pavement layers. The most important elements for this system are the performance of waterproof layer and construction technique for the thin drainage layer. The porous asphalt mix with the maximum aggregate size of 10mm is first developed based on the porous asphalt mix design guide proposed by NCAT, and various physical and mechanical tests are performed to confirm that the porous mix satisfies all the specification requirements. In addition, a series of laboratory tests including low-temperature bending and bonding strength tests for the MMA(Methyl Methacrylate) type of waterproofing material. It is observed from the tests that the MMA material satisfies all the specification requirements. To evaluate the Reld performance of the drainage system, a field study has been conducted on a relatively small size bridge. The QC/QA tests are conducted on the both waterproofing and pavement materials. It has been found that the drainage system works well to drain the water penetrated into the pavement layers.

• Composites Research
• /
• v.26 no.5
• /
• pp.289-294
• /
• 2013

A thinner is used to improve the multi-walled carbon nano-tube (CNT) and carbon black (CB) dispersion in a polymer matrix and to make a soft electrode. The electrical and mechanical properties of the soft electrodes are investigated as functions of CNT, CB and thinner content. The optimal mixing condition for the electrode is thinner 80, CNT 3.5, CB 18 (phr) on the basis of matrix (KE-12). The specific resistance of that is 73 (${\Omega}{\cdot}cm$), and tensile strength, tensile modulus, and elongation of that is 0.45 MPa, 0.21 MPa, and 184%, respectively. Also, a simple structure of the actuator with an optimized electrode and elastomer is fabricated and its characteristic is evaluated. At the operating voltage 25 kV, the displacement of an elastomer KE-12 is 2.24 mm, and that of an elastomer KE-12 with thinner 50 (phr) is 4.05 mm. It shows a higher displacement compared to that of 3M 4910 which has similar modulus. The actuator made with elastomer and electrode of the same material (KE-12) may have advantages for fatigue life and application.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.751-757
• /
• 2003

Rapid densification of a SiC-30 wt% TiC powder with additive 10 wt% A1$_2$O$_3$-Y$_2$O$_3$-CaO was conducted by Spark Plasma Sintering(SPS). The fully-densified materials can be obtain through the SPS process with very fast heating rate and short holding time. In the present work, the heating rate and applied pressure were kept to be $100^{\circ}C$/min and 40 MPa, while sintering temperature varied from $1600^{\circ}C$ to $1800^{\circ}C$ for 10 min. The full densification of SiC-30 wt% TiC composites with the addition of $Al_2$O$_3$, $Y_2$O$_3$ and CaO was achieved at the temperature above $1700^{\circ}C$ by spark plasma sintering. The XRD found that 3C-SiC and TiC were maintained the entire SPS process temperature, without phase transformation of SiC and formation of YAG phase to $1800^{\circ}C$. The microstructures of the rapidly densified SiC-30 wt% TiC composites consisted of smaller equiaxed SiC grains and larger TiC grains. The biaxial strength of 635.2 MPa and fracture toughness of 6.12 MPaㆍ$m^{1/2}$ were found for the specimen prepared at $1750^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.221-228
• /
• 2004

In recent years building floors become larger and more spacious due to the development of new design methods and high strength and light weight materials. However, such long span floor systems may provide smaller amount of damping and have a longer period so that they may be more vulnerable to the floor vertical vibration. In Korea when floors are to be checked against the floor vertical vibration, the provisions developed in foreign countries have been used. However these guidelines have been developed based on human perception, which may vary from country to country. Also, Korea have particular floor systems, such as flat plate floor system of apartment building. This study attempts to evaluate the vibration performance of the floors in typical apartment buildings. Two different floors with the area of $28 m^2$ and $32 m^2$ were investigated. The criteria provided by ATC-1(1999), AISC-11(1997), AIJ(1991) and the local criteria developed in the previous study(Han, 2003) was used to check the acceptability of the floor vertical vibration.