• Journal of the Korean GEO-environmental Society
• /
• v.16 no.4
• /
• pp.23-32
• /
• 2015

This paper addresses the effects of extreme rainfall on the stability of cut slopes in Yen Bai city, Northern Viet Nam. In this area, natural slopes are excavated to create places for infrastructures and buildings. Cut slopes are usually made without proper site investigations; the design is mostly based on experience. In recent years, many slope failures have occurred along these cuts especially in rainy seasons, resulting in properties damaged and loss of lives. To explain the reason that slope failure often happens during rainy seasons, this research analyzed the influence of extreme rainfalls, initial ground conditions, and soil permeability on the changes of pore water pressure within the typical slope, thereafter determining the impact of these changes on the slope stability factor of safety. The extreme rainfalls were selected based on all of the rainfalls triggering landslide events that have occurred over the period from 1960 to 2009. The factor of safety (FS) was calculated using Bishop's simplified method. The results show that when the maximum infiltration capacity of the slope top soil is less than the rainfall intensity, slope failures may occur 14 hours after the rain starts. And when this happens, the rainfall duration is the deciding factor that affects the slope FS values. In short, cut slopes in Yen Bai may be stable in normal conditions after the excavation, but under the influence of tropical rain storms, their stability is always questionable.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.2
• /
• pp.79-87
• /
• 2016

Single visit monolithic restoration can be proceed with digital workflow which consist of intraoral scanning, dental CAD(computer aided design) and restoration milling with CAM(Computer aided manufacturing). While zirconia has more than 900MPa of flexural strength compared with 400MPa for lithium disilicate, shortened fabricating time of lithium disilicate is considered to be a better choice for fabricating single visit full contour monolithic restoration. However, new zirconia materials which are TZI C(Dentsply Sirona) and LUXEN Enamel(Dental Max), new induction heating method of sintering furnace, and new sintering protocols for MoSi2 heating elements sintering furnace offer significantly reduction of full contour monolithic zirconia restoration fabrication time with greater translucency. These new developments lead single visit zirconia restoration in reality.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.189-197
• /
• 2003

The treatment and hauling of surplus soils which occur from construction activity are costly and have been demanding a reasonable recycling method. This study presents laboratory test results regarding the mechanistic properties of asphalt stabilized soils. The foamed asphalt equipment which generates the asphalt bubble was used to mix the soil. The marshall stability, indirect tensile test, resilient modulus, creep test and triaxial test(UU) were conducted to find out the performance of the asphalt stabilized soil. The test results were compared with the samples that fabricated in different conditions(the samples without asphalt and the reinforced samples using 2% cement). The inclusion of the asphalt in the soil has improved the marshall stability, resilient modulus and moisture susceptibility, and the addition of the 2% cement has even more increased these properties. The amount of the fines and the optimum moisture contents for mixing affects the mechanistic properties and important parameters for mix design.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.156-163
• /
• 2002

Hollow core slabs generally have not been used for a bridge or a parking slab in Korea. In this study, high performance hollow core slabs, which have been the most thick one in domestic are re-designed and examined for practical use. Flexural tests were performed on four 315mm deep hollow core slabs to investigate adaptability for high vehicle live loadings and composite action with topping concrete. The precast slabs were pre-tensioned with ten strands of 1/2 inch diameter at the lower of slab and four strands of 1/2 inch diameter at the upper of slab, and cast with 80 mm deep topping concrete. Tested hollow core slabs showed ductile failure behaviors which were conformed to the current Ultimate Strength Design Method for a span of 10m up to the live load of 1,000 kgf/㎡. The rectangular md round shear cotters which were used for the composite action between precast and topping concrete, developed sufficient strengths because cracking, even micro had not been developed at the end of slabs up to the pure flexural tensile failure.

• The Korean Journal of Rehabilitation Nursing
• /
• v.10 no.2
• /
• pp.116-124
• /
• 2007

Purpose: This study was to suggest the direction to the exercise intervention development for the stroke survivors. Method: 12 domestic and 54 foreign research papers about the exercise intervention for the stroke patients published during 1998~2007 were analyzed. Result: Among the papers, quasi-experimental design(75.8%) and multidisciplinary approach(60.6%) were the most frequent ones. The mean age of the respondents was 63.3 and the intervention was supplied for 7.14 weeks. The frequency of exercise was 3.87 per week and the exercise time was 1.88 hours. And physical research variables - such as ambulation, muscle strength, activities of daily living and balance - were more than psychosocial variables. This study suggested that the exercise intervention for the stroke survivors need to include aerobic exercise, muscle strengthening exercise, flexible exercise, body coordination, balance exercise. In addition we confirmed that the exercise intervention was revealed as an effective physiological parameters; such as maximum oxygen uptake quantity, blood pressure. Conclusion: We suggest that the further researchs are needed which include the intensity of exercise into the quantity of the exercise. Also researchers need to extend the motion intervention time for an effective sociopsychological variable and to try the meta analysis for the effective exercise intervention for the stroke survivors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.996-1003
• /
• 2003

There are critical drawbacks in fabricating MMIC transversal filters because the length of the conventional transversal filter structure is much longer than the width. In order to solve this structural problem, a transversal filter using multiple-coupled-line directional couplers which can achieve tight coupling is proposed. The length of the proposed transversal filter can be made short using multiple-coupled-line couplers so that the structure of the proposed filter is applicable to MMIC technology. Because of the dielectric and conductor losses, the excited signal at the input port becomes smaller when it progresses through each directional coupler. Therefore, the strength of the coupled signals at the latter directional couplers becomes smaller than the designed one and this, in turn, gives rise to performance aggravation. A modified coupling coefficient formula to prevent frequency characteristic degradation is introduced. The proposed filter structure and the design method are verified by the calculated result and 3D full-wave analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.905-909
• /
• 2001

The significance of casting/forging process for reducing the production cost of large components is being noted in these days. This casting/forging process is a method of forging a workpiece preformed by casting into the final shape. In this study, the casting/forging process has been applied in manufacturing a large aluminum flange in order to determine the optimum forging condition of the aluminum flange. The optimum range of forging temperature of Al 5083 was from $420^{\circ}C$ to $450^{\circ}C$. The suitable strain rate was 1.5 $sec^{-1}$. The deformation amount of a preform in a forging process is key role in the mechanical properties of casting/forging products. In order to find the change of mechanical properties according to effective stain of cast aluminum billets, a hot upsetting test were performed with rectangular blocks and then a uniaxial tensile test was performed with specimens cut from the upsetted billets. The tensile strength and the elongation of cast/upsetted aluminum billets were increased largely until the effective strain was 0.7. FE analysis was performed to determine the configurations of cast preform and die for an aluminum flange. In the FE analysis, the forging load-limit was fixed 1500ton for the low equipment cost. The cast preform was designed so that the effective stain around the neck of a flange exceeds 0.7. In the forging experiment for an aluminum flange, it was confirmed that the optimal configuration of the cast preform predicted by FE analysis was very useful. The cast/forged products using designed preform were made perfectly without any defects.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.85-98
• /
• 2010

An advanced and proactive response mechanism against diverse attacks on All-IP network should be proposed for enhancing its security and reliability on open network. There are two main research works related to this study. First one is the SPIE system with hash function on Bloom filter and second one is the Sinkhole routing mechanism using BGP protocol for verifying its transmission path. Therefore, advanced traceback and network management mechanism also should be necessary on All-IP network environments against DDoS attacks. In this study, we studied and proposed a new IP traceback mechanism on All-IP network environments based on existing SPIE and Sinkhole routing model when diverse DDoS attacks would be happen. Proposed mechanism has a Manager module for controlling the regional router with using packet monitoring and filtering mechanism to trace and find the attack packet's real transmission path. Proposed mechanism uses simplified and optimized memory for storing and memorizing the packet's hash value on bloom filter, with which we can find and determine the attacker's real location on open network. Additionally, proposed mechanism provides advanced packet aggregation and monitoring/control module based on existing Sinkhole routing method. Therefore, we can provide an optimized one in All-IP network by combining the strength on existing two mechanisms. And the traceback performance also can be enhanced compared with previously suggested mechanism.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.35-44
• /
• 2005

Recently, underground cavities such as limestone cavity and abandoned mine give rise to a lot of damage in SOC facilities. But there are many difficult problems such as delay of the working terms and enormous economic losses in finding a new method and changing construction design. In this study, a new filling material for underground cavities was developed using the stone-dust classified as industry waste polluting environment. As a result of test, filling material properties was that a compressive strength was $34{\~}60\;kgf/cm^2$, a change ratio in length was $0.268{\~}0.776\%$ and water absorption was $34.3{\~}46.9\%$. Also as a result of suspended mass test and pH test, it was confirmed that the developed filling material has a characteristic of non-separating in water and it was an environmentally friendly material.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.273-282
• /
• 2020

PURPOSE. To assess shear bond strengths (SBS) of resin composites on aged and non-aged prosthetic materials with various surface treatments. MATERIALS AND METHODS. Cerasmart (CE), Vita Enamic (VE), Vita Mark II (VM), and IPS e.max CAD (EC) blocks were sliced, and rectangular-shaped specimens (14 × 12 × 1.5 mm; N = 352) were obtained. Half of the specimens were aged (5000 thermal cycles) for each material. Non-aged and aged specimens were divided into 4 groups according to the surface treatments (control, air abrasion, etching, and laser irradiation; n = 11) and processed for scanning electron microscopy (SEM). The repair procedure was performed after the surface treatments. SBS values and failure types were determined. Obtained data were statistically analyzed (P≤.05). RESULTS. The material type, surface treatment type, and their interactions were found significant with regard to SBS (P<.001). Aging also had a significant effect on prosthetic material-resin composite bonding (P<.001). SBS values of non-aged specimens ranged from 12.16 to 17.91 MPa, while SBS values of aged specimens ranged from 9.46 to 15.61 MPa. Non-aged VM in combination with acid etching presented the highest score while the control group of aged CE showed the lowest. CONCLUSION. Etching was more effective in achieving durable SBS for VM and EC. Laser irradiation could be considered as an alternative surface treatment method to air abrasion for all tested materials. Aging had significant effect on SBS values generated between tested materials and resin composite.