• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.790-791
• /
• 2006

The fracture behavior and mechanical characteristics of sintered rare-earth magnets were investigated. It shows that the fracture behavior and bending strength of the magnets obviously exhibit anisotropy. Sm-Co magnets tend to cleavage fracture in the close-packed (0001) plane or in the ($10\bar{1}1$) plane. The fracture mechanism of $Nd_2Fe_{14}B$ magnet mainly appears to be intergranular fracture. The anisotropy of fracture behavior and mechanical strength of sintered rare-earth magnets is caused mainly by the strong crystal-structure anisotropy and the grain alignment texture. The effects of Nd content, and Pr, Dy substitution on the impact stability of $Nd_2Fe_{14}B$ magnets were also reported.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.109-126
• /
• 1996

이 연구에서 사용된 화학제는 NaCl이다. NaCl과 모래-벤토나이트 혼합물이 각기 다른 혼합률로 배합되어 삼축 압축 시험을 하였다(5, 10, 15%). 탄성계수와 점착력, 그리고 내부 마찰각이 구속 응력과 NaCl의 함수로 얻었다. 이로부터 구한 강도 정수를 근거로 하여 응력-변형률-강도의 거동 특성을 화학액의 농도함수로 residual flow procedure(REP)에 연결하였다. RFP와 함께 유한요소법을 이용한 사면안정 해석 프로그램을 개발하여 안전율을 구하였으며 강도정수를 화학용액의 농도함수로 요소방정식에 넣어구한 안전율을 비교하였다. 이로써 화학용액이 흙제방의 안정성에 미치는 영향을 분석하였다.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.40-48
• /
• 2011

To build up the conservativeness of aged paper heritages, the strength reinforcement treatment using various cellulose derivative solutions was considered. Hand-made Hanji prepared by traditional papermaking technique was firstly simulated in order to modify the overall of paper properties like aged paper heritages by accelerated ageing treatment at $150^{\circ}C$ for 24 hours, and then the ageing stability of Hanji was verified through the secondary accelerated ageing at $150^{\circ}C$ for 12 hours. The physical properties of aged Hanji were improved by applying with cellulose derivative solutions. The ageing stability for physical, optical (L, brightness, opacity, yellowness) and chemical (oxidation index, degree of polymerization) properties of aged Hanji treated with all kinds of cellulose derivative solutions was also good compared to those of untreated samples, especially using MC solution. Therefore, it was that a kind of MC solution would be well-suited for the strength reinforcement treatment of aged paper heritages.

• 대한가정학회지
• /
• 제31권2호
• /
• pp.81-96
• /
• 1993

The purpose of this study is to investigate how external pressures to remain married and alternative attractions to a marriage influence the relationship between marital satisfaction and marital stability. A total of 228 married women in Seoul responded to structured questionnaires. The major findings are as follows; 1. While the marital satisfaction is positively associated with the marital stability, the alternative attractions to a marriage are negatively associated with the marital stability. But there is no significant correlation between external pressures to remain married and marital stability. 2. The relationship strength between marital satisfaction and marital stability according to the level of external pressures to remain married and actual alternatives to a marriage is not appeared significant difference. 3. When the external pressures to remain marred are low and the imaginary alternatives to a marriage are low, marital satisfaction is the most powerful predictor of marital stability. 4. Whether wife has a job and marital satisfaction affected the marital stability independently.

• 한국산림과학회지
• /
• 제102권1호
• /
• pp.90-96
• /
• 2013

이 연구는 '콘크리트 테스트 해머'를 이용하여 1990년대에 경기도와 강원도에서 시공된 사방댐 중 사방협회 에서 육안 점검한 사방댐 10기(양호 6기, 불량 4기)의 대수면, 방수로 및 반수면의 반발경도 측정을 통해 사방댐의 안정성을 파악하여 사방댐의 비파괴검사에 적합한 압축강도 추정식과 적정 판정범위를 정하는 것을 목적으로 진행하였다. 특히, 콘크리트 사방댐 본체의 안정성을 사전에 파악하게 되면 사방댐을 적시에 보수, 관리할 수 있고, 사방댐 본연의 기능인 토사유출방지기능을 최대화할 수 있다. 콘크리트 사방댐의 압축강도 조사한 결과, 현재 사방협회에서 진행 중인 안정점검 육안 점검 결과와 대부분 일치하였다. 또한, 안정점검시 압축강도는 일본건축학회에서 제시한 추정식을 적용하는 것이 적합할 것으로 판단되었으며, 판정 기준은 300 $kgf/cm^2$ 이상일 경우에는 '안정', 250~300 $kgf/cm^2$이 범위일 경우에는 '정밀검사 필요', $kgf/cm^2$ 미만일 경우에는 '불량' 판정을 내리는 것이 적합하다고 사료된다. 그리고 사방댐의 연대별 압축강도에 대한 자료를 충분히 축적하고, 이를 토대로 우리나라 사방댐에 적합한 안정기준과 압축강도 추정식이 필요하다고 사료된다. 앞으로는 육안 점검과 간이 안정성 검사를 통해 사방 구조물에 이상이 발견될 경우 정밀진단 검사를 실시하여 안정도를 파악하는 체계가 구축되어야 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.925-930
• /
• 2006

During the excavation of a tunnel portal, failure zones around the tunnel heading occur and also the ground supports itself. In a portal, its location and the ground characteristic have a great influence on the stability of the tunnel. Therefore, the failure mechanism of a tunnel heading and how to assess the stability of the tunnel are very important. In this paper, the numerical analyses were executed to evaluate the safety factor using strength reduction technique. The influence area of an excavation was also predicted through a case study in which no-support case and support case with the Pattern P-6 were compared in terms of the ground class and the shear strain.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.569-579
• /
• 2004

The lift-off characteristics of lifted laminar propane jet flames highly diluted with nitrogen are investigated introducing acoustic forcing with a fuel tube resonance frequency. A flame stability curve is obtained according to forcing strength and the nozzle exit velocity for N2 diluted flames. Flame lift-off behavior is globally classified into three regimes; 1) a weakly varying partially premixed behavior caused by a collapsible mixing for large forcing strength, 2) a coexistent behavior of the edge flame and a weakly varying partially premixed behavior for moderate forcing strength, and 3) edge flame or triple flame behavior for small forcing. It is shown that the laminar lifted flame with forcing affects flame lift-off behavior considerably, and is also clarified that the flame characteristic of flame base is well described with the penetration depth of the degree of mixing, ${\gamma}$$\_$$\delta$/. It is also confirmed that the weakly varying partially premixed flame caused by a collapsible mixing fur large forcing strength behaves as that just near flame blow-out in turbulent lift-off flame.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.388-395
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the resistance to deformation under static overloading by measuring yield and fracture strength, and to analyze the failure characteristics of implant assemblies made of different titanium grades and connections. MATERIALS AND METHODS. Six groups of implant assemblies were fabricated according to ISO 14801 (n=10). These consisted of the combinations of 3 platform connections (external, internal, and morse tapered) and 2 materials (titanium grade 2 and titanium grade 4). Yield strength and fracture strength were evaluated with a computer-controlled Universal Testing Machine, and failed implant assemblies were classified and analyzed by optical microscopy. The data were analyzed using the One-way analysis of variance (ANOVA) and Student's t-test with the level of significance at P=.05. RESULTS. The group $IT4_S$ had the significantly highest values and group IT2 the lowest, for both yield strength and fracture strength. Groups $IT4_N$ and ET4 had similar yield and fracture strengths despite having different connection designs. Group MT2 and group IT2 had significant differences in yield and fracture strength although they were made by the same material as titanium grade 2. The implant system of the similar fixture-abutment interfaces and the same materials showed the similar characteristics of deformation. CONCLUSION. A longer internal connection and titanium grade 4 of the implant system is advantageous for static overloading condition. However, it is not only the connection design that affects the stability. The strength of the titanium grade as material is also important since it affects the implant stability. When using the implant system made of titanium grade 2, a larger diameter fixture should be selected in order to provide enough strength to withstand overloading.

• Composites Research
• /
• 제12권3호
• /
• pp.84-90
• /
• 1999

HAC/PVA계 MDF시멘트 복합재료의 수분안정성 및 기계적 강도향상을 위하여 불용성 폴리머류(폴리우레탄, 페놀, 에폭시수지)와 탄소섬유(길이3mm)를 1-4wt% 보강하였다. 그리고 가압성형법으로 제조한 복합체의 수분침적 기간별 강도특성(수분안정성)과 계면 및 기계적 특성에 영향을 미치는 폴리머와 시멘트의 가교반응에 대하여 SEM 및 TEM 분석을 통하여 관찰하였다. HAC/PVA계 MDF 시멘트 복합체의 섬유함량에 따른 건조 굽힘강도는 섬유함량이 증가할수록 치밀화 구조가 저하되어 비례적으로 감소되었다. 또한 불용성 폴리머류를 사용한 경우에 건조 굽힘강도는 섬유함량이 증가될수록 저하되는 반면, 수분안정성은 크게 향상되었다. 에폭시 수지를 첨가한 경우에 수분안정성이 가장 우수하였으며, 섬유함량 4% 첨가의 경우에 3일 침적강도가 95%, 7일침적시 87%강도를 유지하였다. 이 점은 폴리머와 시멘트의 금속이온이 가교반응을 일으켜 섬유-메트릭스간 계면 부착강도를 크게 개선되었기 때문으로 추정된다. 반면 인장강도 특성은 모든 불용성 폴리머류 첨가 수준에서 섬유 함량이 증가할수록 비례적으로 증가되었으며, 역시 에폭시 수지 첨가의 경우에 강도특성이 가장 우수하였다. 그리고 섬유함량 4% 첨가된 경우에 있어서 인장강도는 섬유함량 0% 대비 약 30~80% 높게 나타났다.