• 대한산업공학회지
• /
• 제32권4호
• /
• pp.298-313
• /
• 2006

Six sigma is focused on quality improvement through variation reduction, while lean is on process flow improvement and lead time reduction by waste elimination. However, lean cannot bring a process under statistical control and six sigma alone cannot dramatically improve process speed. Lean six sigma was developed to achieve faster rate of improvement in customer satisfaction, cost, quality, process speed, and invested capital. In this paper we present the importance of using value stream mapping and suggest a guideline on how to integrate lean and six sigma by is proposed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.355-358
• /
• 2002

A sediments are Integral called as gravel, sand, clay, mineral materials which are settling in bottom layer of reservoir, stream, and oceans from land. In practical problems relations of sediments are flood by decreed of flow capacity and down of water quality. Dredged sediments are composed with constructed material and variety of pollutant compounds. Therefore, it is very much of cost effects in nationally, if development for use of constructed material separated only constructed material within sediments. And it will be continue to the dredge operation of stream sediment for retrofit of water environment and sustainable's after the years. The following results could be obtained : In case of high concentration sediments, sample for design of CDF was shown property of flocculent settling. Assuming that average inflow rate is 1, 000㎥/hr, mean residence time( $T_{d}$), average ponding depth( $H_{pd}$ ), and design surface area for flocculent settling( $A_{df}$ ) were 5 hr, 0.6m, and 15, 750 $m^2$ respectivelyrespectivelyy

• 한국전산유체공학회지
• /
• 제5권2호
• /
• pp.9-19
• /
• 2000

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using the two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'Dynamic Domain Dividing Line' which has an advantage for constructing a well-defined hole-cutting boundary. A conservative Chimera grid method with the dynamic domain-dividing line technique is applied and validated by solving the flowfield around a circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver are also examined by computations of an oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1995

The behavior of the work materials in the chip-tool interface in extremely high strain rates and temperatures is more that of viscous liquids than that of normal solid metals. In these circumstances the principles of fluid mechanics can be invoked to describe the metal flow in the neighborhood of the cutting edge. In the present paper an Eulerian finite element model is presented that simulates metal flow in the vicinity of the cutting edge when machining a low carbon steel with carbide cutting tool. The work material is assumed to obey visco-plastic (Bingham solid) constitutive law and Von Mises criterion. Heat generation is included in the model, assuming adiabatic conditions within each element. the mechanical and thermal properties of the work material are accepted to vary with the temperature. The model is based on the virtual work-stream function formulation, emphasis is given on analyzing the formation of the stagnant metal zone ahead of the cutting edge. The model predicts flow field characteristics such as material velocity effective stress and strain-rate distributions as well as built-up layer configuration

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.59-75
• /
• 2005

In gravure printing, the amount of ink from cells has a great effect on the qualities of final printed products. And printability of final products is determined by every kinds variables. Ink transfer process is not verified scientifically because gravure cell is of small size and print speed is rapid. Therefore in order to study of ink transfer mechanism, this study is using the Computational Fluid Dynamics Evaluation. Polyflow 3-10 simulation software is used for considering of non-Newtonian flow. Among the various factors, this study have dealt with gravure cell types used computer simulation in order to define distinctive features in ink flow and transfer. The results of simulation, it defined the distribution of pressure, speed, stream function, viscosity, shear rate during the gravure printing. It is fined out the difficulties and characteristics according to the shape of cell types. Through this study, the condition of gravure printing is depending on the print condition and characteristic of cells.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1196-1204
• /
• 2001

The rivulet is a narrow stream of liquid flowing down a solid surface. When the rivulet\`s flow rate exceeds a certain limit, it tends to meander exhibiting the instability of its interface. This analysis performs a perturbation analysis of this meandering rivulet assuming an inviscid flow possessing contact angle hysteresis at the contact line. The analysis reveals that the contact angle hysteresis as well as the velocity difference across the inter-face, strongly induces the instability of the liquid interface. Moreover, when the rivulet veto-city is low, it is predicted that the axisymmetric disturbance amplifies more rapidly than the anti-axisymmetric disturbance, which explains the emergence of the droplet flow at the low velocity regime.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2002

Dispersion of coolant jets in a film cooling flow field is the result of a highly complex interaction between the film cooling jets and the mainstream. In order to investigate the effect of blowing ratios on the film cooling of turbine blade, cylindrical body model was used. Mainstream Reynolds number based on the cylinder diameter was $7.1\;\times\;10^4$. The free-stream turbulence intensity kept at $5.0\%$ by using turbulence grid. The effect of coolant flow rates was studied for blowing ratios of 0.9, 1.3 and 1.6, respectively. The temperature distribution of the cylindrical model surface is visualized by infrared thermography (IRT). Results show that the film-cooling performance may be significantly improved by controlling the blowing ratio. As blowing ratio increases, the adiabatic film cooling effectiveness is more broadly distributed and the area protected by coolant increases. The mass flow rate of the coolant through the first-row holes is less than that through the second-row holes due to the pressure variation around the cylinder surface.

• Ecology and Resilient Infrastructure
• /
• 제9권1호
• /
• pp.68-76
• /
• 2022

본 연구에서는 금강수계 미호천 유역에서 어류 서식지적합도지수 (HSI)를 산정하고 환경생태유량을 산정하였다. 이를 위해 미호천의 상류와 하류를 대표할 수 있는 2개 지점 (St.3과 St.8)을 선정하고, 어종별 수심과 유속 등 물리적서식지 정보를 구축해 서식지적합도지수를 산정하였다. 서식지적합도지수는 채집된 개체수와 유량조사 결과를 수심과 유속의 관계를 이용해 WDFW 방법으로 산정하였고, 대표어종 선정시 우점종인 피라미 (Zacco platypus)와 유량에 민감한 유영성 어종으로 결정하였다. 단일종인 피라미의 경우 수심 범위는 0.1 - 0.5 m, 유속 범위는 0.2 - 0.5 m/s 이고, 유영성 어종인 경우 수심 범위는 0.2 - 0.5 m, 유속 범위는 0.2 - 0.5 m/s 이다. 미호천의 대표지점인 St.3과 St.8에서 대표어종인 유영성군집 및 피라미에 대한 유량 (Discharge)-가중가용면적 (WUA) 관계 곡선 및 서식지적합도 분포를 모의하였다. 미호천 상류 St.3에서 가중가용면적이 최대값을 나타내는 최적유량은 유영성 군집이 4.0 m³/s, 피라미가 2.7 m³/s 로 모의되었다. 하류지점인 St.8에서는 유영성 군집이 8.8 m³/s, 피라미가 7.6 m³/s 로 모의되었다. 두 지점 모두 유영성군집 어종의 최적유량이 크게 산정되었다. 이는 유영성 군집의 서식지적합도지수가 피라미의 서식조건보다 더 빠른 유속을 필요로 하기 때문이다. 최소유량 산정에서도 피라미의 유량이 더 작고, 보다 더 많은 가중가용면적을 제공하는 것으로 평가된다. 군집 어류의 경우 수심과 유속의 범위를 좁게 산정하면 필요유량이 증가하고 가중가용면적은 상대적으로 감소한다. 따라서 군집어류에 대한 서식지적합도지수 산정시 범위를 좁게 설정하는 것보다 모든 어종의 서식지를 포함하는 지수를 산정하는 것이 유리하다.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.55-63
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, three different types of impingement baffle plate-squared, curved and mitigating type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type baffle plate is more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• 환경영향평가
• /
• 제29권6호
• /
• pp.414-429
• /
• 2020

하천의 관리를 위하여 수질오염총량 및 물환경기본계획을 수립하여 목표수질을 설정하고 있으며 금호강의 경우 T-P는 목표수질을 달성하고 있으나 BOD, COD, TOC의 경우 지난 5년간 물환경기본계획 목표수질을 초과하였다. 이에 금호강을 대상으로 BOD, COD, TOC를 이용하여 유달부하량 및 유달부하밀도, 오염기여율을 분석하고 수질오염총량관리에서 사용하고 있는 1차원 수질모델인 QUAL-MEV를 활용하여 목표수질 만족을 위한 필요유량을 모의하였다. 유달부하량을 분석한 결과 금호C 지점에서 BOD, COD, TOC 모두 9,832.2 kg/day, 20,656.6 kg/day, 15,545.1 kg/day로 가장 높게 나타났으며, 유달부하밀도는 강우기 및 비강우기에 달서천에서 9.47 kg/day/㎢, 37.55 kg/day/㎢, 30.20 kg/day/㎢과 17.19 kg/day/㎢, 47.59 kg/day/㎢, 39.14 kg/day/㎢로 가장 높게 나타났다. 오염기여율은 강우기에 팔거천이 약 25%, 비강우기에 달서천이 모든 항목에서 약 50%로 가장 높게 나타났다. 또한 금호강본류 및 지류 유기물질간의 상관관계 분석을 수행한 결과 비강우기, 강우기 모두 COD-TOC가 0.8 이상으로 BOD-COD, BOD-TOC보다 상관관계가 높게 나타났다. 그리고 금호C 지점에서 수질오염총량 및 물환경기본계획 목표수질을 만족하기 위한 유량을 조사한 결과 2019년 4월(3.46 ㎥/sec)을 기준으로 약 14배, 22배의 추가유량이 필요한 것으로 분석되었다.