• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.27-31
• /
• 2014

Magnetic fields (MF) generated both on board the vehicle and along the guideway provide levitation and propulsion forces. High speed maglev trains adopt electromagnet or superconducting magnet to realize levitation and propulsion functions. However, stray fields existing in passenger compartment and regions surrounding the vehicle and guideway have effect on passengers and environment. To investigate stray magnetic field effect, model of Transrapid and MLX are studied.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.740-746
• /
• 1987

In calculating resonant frequencies of a microstrip resonator the effect of the stray field at resonator edges has been neglected in most publications. The formula for resonant frequencies therefore provided inaccurate results. In the paper the effective dimension and the dynamic dielectic constant of a resonator are defined and obtained for more accurate resonant frequencies and qualty factor by including the effect of stray fields. Theoretical results obtained from the new formula show good agreement with experimental results. In addition, the effect on resonant modes of the distance and coupling angle between the microstrip line and the resonator is also observed.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1934-1939
• /
• 1989

The circular microstrip resonator which can be exactly performed with theoretical resonant frequency using the conception of dynamic effective relative dielectric constants is analyzed in this paper. The formula of exact resonant frequency of resonator, in this study, is estabilished by effective resonator dimension and dynamic relative dielectric constant. The measurement of transmission type circular resonator which fabricated by AL2O3 and Epsilam-10 is to prove that the experimental results are more agreed a well with the simulated values by this new method than the simple resonator model.

• Radiation Oncology Journal
• /
• 제2권2호
• /
• pp.271-280
• /
• 1984

The peripheral dose, defined as the dose outside therapeutic photon fields, which is responsible for the functional damage of the critical organs, fetus, and radiation. induced carcinogenesis, has been investigated for $^{60}Co\;\gamma$ ray and 10 MV Xray. It was measured by silicon diode controlled by semiautomated water phantom without any shielding or with lead plate of HVL thickness put horizontally or vertically to shield stray radiations. Authors could obtain following results. 1. The peripheral dose was larger than $0.7\%$ of central axis maximum dose even at 20cm distance from field margin. That is clinically significant, so it should be reduced. 2. Even for square fields of 10 MV Xray, radial peripheral dose distribution did not coincide with transverse distribution, because of the position of collimator jaws. 3. Between surface and $d_m$, the peripheral dose distributions show a pattern of the dose distribution of electron beams and the maximum doss was approximately proportional to the length of a side of square field. 4. The peripheral doses depended on radiation quality, field size, distance from field margin and depth in water. Distance from field margin was the most important factor. 5. Except for near surface, the peripheral dose from phantom was approximately equal to that from therapy unit. 6. To reduce the surface dose outside fields, therapist should shield stray radiations from therapy unit by lead plate of at least one HVL for 10 MV X-ray and by bolus equivalent to tissue of 0.5cm thickness for $^{60}Co$. 7. To reduce the dose at depth deeper than $d_m$, it is desirable to shield stray radiations from therapy unit by lead.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.88-90
• /
• 2009

Extremely-Low-Frequency(ELF) magnetic fields are generated around power cables and bus bars in power systems. Such the stray fields may cause disturbances to nearby electronic apparatus and affect even human health. In order to seeking out a proper way to reducing the fields, the first thing to do is to accurately predict field distribution around analysis models of interest. Then, optimization techniques should be applied for finding a more improved design than the initial one. To achieve this goal, commercial electromagnetic software, MagNet, is combined with evolution strategy algorithm. For verification of the proposed method, three-phase power line cables and busbar systems have been tested.

• 전기의세계
• /
• 제14권1호
• /
• pp.5-12
• /
• 1965

In the designs of the sensitive electronic devices such as phase sensitive detector, X-ray diffractometer, and neutron diffractometers, we must take into account the geometrical factors in a coil systems and extraneous stray fields. Input wave forms in such a sensitive electronic devices are often altered by the influence of these factors. Since the magnitude of the stray fields is generally very small, this affection may be removed by applying a good shielding but it is not ease to remove the affection from a geometrical factor. This affection must be however calculated by the theoretical methods and analytical solution in the equation of these factors. The fundamental purpose of this paper lie in the theoretical calculations and practical measurements of the geometrical factor in the coil systems, finite solenoid, and four point prove. In the heoretical calculations, the geometrical factors in the coil systems were calculated by applying the elliptic functions and in the contact points were calculated by applying the elliptic functions and in the contact points were calculated by applying the eigen functions and the infinite series. The measurements were carried out by using the sensitive electronic device made from author's design, as shown in the Fig. 9. The result of this work has verified the essential correctness of theoretical investigations and measuring techniques of geometrical factors on the design of sensitive electronic devices. It also has several advantages such that: (1) all the data obtained may give effective data to designer to work on the field of sensitive electronic devices or microelectronic devices, (2) it has evidently explained the characteristics of electrical investigations and physical definition, and has removed the conventional error of geometrical factors in the coil systems and contact points.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.17-20
• /
• 2014

We have investigated the effect of temperature and bias current on the stability of the inverse spin-switch effect in Permalloy(Py)/Nb/Permalloy pseudo spin-valves. The inverse spin-switch operates between two orientations of the ferromagnetic moments of Py layers; parallel (ON) and antiparallel-domain (OFF) state. Measuring time scans of the resistance changes between the ON and OFF state, ${\Delta}R_{ON-OFF}$, while alternating magnetic fields between the two states at various temperatures and bias currents, revealed that enhancement of ${\Delta}R_{ON-OFF}$ is a key factor to achieve successful operation of superconducting spin switch.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.31-39
• /
• 2015

Macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by a three-dimensional (3D) model for exchange-coupled Sm-Co/${\alpha}-Fe$/Sm-Co trilayers with in-plane collinear easy axes. These results are carefully compared with the popular one-dimensional (1D) micromagnetic models and recent experimental data. It is found that the results obtained from the two methods match very well, especially for the remanence and coercivity, justifying the calculations. Both nucleation and coercive fields decrease monotonically as the soft layer thickness $L^s$ increases while the largest maximum energy product (roughly 50 MGOe) occurs when the thicknesses of hard and soft layers are 5 nm and 15 nm, respectively. Moreover, the calculated angular distributions in the thickness direction for the magnetic moments are similar. Nevertheless, the calculated nucleation and pinning fields as well as the energy products by 3D OOMMF are systematically smaller than those given by the 1D model, due mainly to the stray fields at the corners of the films. These demagnetization fields help the magnetic moments at the corners to deviate from the previous saturation state and facilitate the nucleation. Such an effect enhances as $L^s$ increases. When the thicknesses of hard and soft layers are 10 nm and 20 nm, respectively, the pinning field difference is as large as 30%, while the nucleation fields have opposite signs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.121-121
• /
• 2010

As the industrial technology is getting higher, the pulsed power technology is required from various fields such as thermonuclear fusion energy sources, military applications, electric power distribution, and a variety of new specialized needs. This technology deals with the generation of very high power electromagnetic pulses through fast switching. We fabricated a pulsed power generator, named EMD pulse generator, by using Marx circuit with 200 kV high, 50 ns fast rise time. In this paper, we described about an effect of stray capacitance of coaxial Marx generator, EPG-AM200k, and a comparing the results of experiments and circuit analysis.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.271-282
• /
• 2021

The internet of things (IoT) technology is a key component for the advent of 4^th industrial revolution, which is the network of home appliances, infrastructures, and vehicles to remotely investigate these systems. For the operation of compact IoT devices, batteries are widely used as electric power, and the limited lifetime of batteries inevitably leads to periodic replacement. Magneto-mechano-electric (MME) generators may be alternatives to batteries inside the IoT devices by converting stray magnetic field into electric energy, since we are always surrounded by ambient alternating current (AC) magnetic fields induced from electric power transmission lines everywhere. This article reviews the recent domestic research progress in high-performance MME generators and their application field for IoT and electronic devices.