• Transactions of Materials Processing
• /
• v.7 no.4
• /
• pp.333-339
• /
• 1998

Hot torsion tests were conducted to investigate the high temperature deformation behavior of $Al_{85}Ni_{10}Y_5$ alloy extrudates fabricated with amorphous ribbons. The powder metallurgy routes, hot pressing and hot extrusion were used to fabricate the extrudates. Thermal properties of amorphous ribbons with different thickness as a function of aging temperature were studied by thin film x-ray dif-fraction (XRD) and differential scanning calorimetry(DSC). The Al phase crystallite firstly formed in the amorphous ribbons and its crystallization temperature($T_x$)Was ~210${\circ}C$ During the processings of consolidation and extrusion, nano-grained structure(~100 nm) was formed in the Al85Ni10Y5 alloy extrudates. The as-extrudated Al85Ni10Y5 alloy and the $Al_{85}Ni_{10}Y_5$ alloy annealed at 250${\circ}C$ for 1 hour showed a flow curve of DRV(dynamic recovery) during hot deformation at 400-550${\circ}C$. On the other hand, the $Al_{85}Ni_{10}Y_5$ alloy annealed at 400${\circ}C$ for 1 hour showed a flow curve of DRX(dynamic recrys-tallization) during hot deformation at 450-500${\circ}C$. Also the flow stress and flow strain of the $Al_{85}Ni_{10}Y_5$ alloy extrudate annealed at 400${\circ}C$ were higher than those at 250${\circ}C$.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.2
• /
• pp.145-156
• /
• 1999

The distribution of the second phase, the change of transformation temperature and mechanical properties with thermomechanical treatment conditions were investigated by metallography, calorimetry, EDS, tensile test and fractography in a Cu-Al-Ni-Ti-Mn alloy. The cast structure revealed Ti-rich precipitates($X_L$ phase) between dendrite arms, which have been identified as $(Cu,Ni)_2TiAl$ intermetallic compounds. By homogenizing above $900^{\circ}C$, the $X_L$ phase was melted in the matrix, while the Xs phase was precipitated in matrix and the volume fraction of it was increased. When hot-rolled specimen was betatized below $750^{\circ}C$, recrystallization could not be observed. However, the specimen betatized above $800^{\circ}C$ was recrystallized and the grain size was about $50{\mu}m$, while Xs phase was precipitated in matrix. With raising betatizing temperature, $M_s$ and $A_s$ temperatures were fallen and transformation hysteresis became larger. The strain of the specimen betatized at $800^{\circ}C$ was 8.2% as maximum value. The maximum shape recovery rate could be obtained in the specimen betatized at $800^{\circ}C$ but it was decreased due to the presence of Xs phase with increasing betatizing temperature.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.1
• /
• pp.21-27
• /
• 2008

The expression of heat shock protein genes (Hsp 70, Hsp 40, Hsp 20.8 and Hsp 20.4) against thermal stress in silkworm Bombyx mori was performed through semi-quantitative reverse transcriptase-polymerase chain reaction (RT-PCR). Upon exposure of silkworm to two temperature regimes ($38^{\circ}C$ and $42^{\circ}C$), significant change in the expression of Hsp gene was observed as compared to the control. Hsp 70 and Hsp 40 showed increased expression than the small heat shock protein genes Hsp 20.8 and Hsp 20.4. The Hsp 70 showed increased expression during the recovery period as compared to 1 hr thermal treatments ($38^{\circ}C$/1 hr and $42^{\circ}C$/1 hr). Whereas, Hsp 40, Hsp 20.8 and Hsp 20.4 genes showed higher expression level at initial stages that later gradually decrease during recovery period. Tissue specific expression of Hsp 70 showed variation in the level of expression amongst the tissues. The mid gut and fat body tissues showed higher expression than the cuticle and silk gland tissue. The Hsp 70, Hsp 40 gene expression was analyzed in thermotolerant (Nistari) and thermo susceptible silk worm strain (NB4D2) and results showed significant variation in their expression level. The Nistari showed higher expression of Hsp 70 and Hsp 40 genes than the NB4D2. These findings provide a better understanding of cellular protection mechanisms against environmental stress such as heat shock, as these Hsps are involved in an organism thermotolerance.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.416-418
• /
• 2009

The hepatoprotective effect of Cordyceps militaris culture broth was determined using HaM/ICR strain mice. Compared to control, the intra-peritoneal injection of benzo($\alpha$)pyrene (B($\alpha$)P) remarkably increased the activities of aspartate aminotransferase (AST) and alanine aminotransferase (ALT) in the serum and the level of lipid peroxide (LPO) in liver tissue, which mean the liver was damaged by B($\alpha$)P. However, compared to B($\alpha$)P, oral administration of C. militaris culture broth showed decrement of AST, ALT, and LPO activities and increment GST activity and GSH level in liver tissue. These suggest that C. militaris culture broth recovered hepatic damage induced by B($\alpha$)P.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.290-299
• /
• 2010

The bioactive effects of ethanol extracts from fly maggot (ME) on reduction of plasma lipids levels in rats fed high-fat diets (Expt. Ⅰ), and on liver function recovery of hepatotoxicity rats by intraperitoneal injection of carbon tetrachloride ($CCl_4$) or by orally administration of alcohol (Expt. II) were investigated. In expt. I, twenty seven, male rat SDS(sprague dawley strain) were randomly assigned to three treated groups, including normal control group, HF (group with high fat diets which have no extracts) and HFE (HF plus orally administered doses of ME extract at 5.0 mg/100g of body weight). In expt. II, forty five, male rats (SDS) were randomly assigned to each of the five groups: T1 (control), T2 (intraperitoneal injection of $CCl_4$), T3 (intraperitoneal injection of $CCl_4$ after orally administered with ME), T4 (orally administered with combination of ME and alcohol), T5 (orally administration of ME after orally administered with alcohol). There were significant decreases in plasma (TAG), (TC), (LDL-C) in the HFE group with orally administered doses of ME at 5.0 mg/100g of body weight, respectively, however, the (HDL-C) were significantly increased in HFE group as compared to HF group with high fat diets which have no extracts (p<0.05). The levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), ${\gamma}$-glutamyl transferse(${\gamma}$-GTP) and bilirubin were highest in T2 or T3, and high in order T4 or T5, and lowest in T1 except for bilirubin which has same with T4, T5 (p<0.05). The high recovery of liver damage by $CCl_4$ from the light microscopic appearance was observed in rats (T3) with extracts, and also high in T4 than T5 by orally administrated with alcohol. In conclusion, the ethanol extracts from fly maggot may have a bioactive effects to prevent for human lipids disorder and alcoholic disease.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1388-1401
• /
• 2021

Postoperative imaging of the rotator cuff may be performed routinely, even if pain or disability develops after surgery or if there are no symptoms. Postoperative images are obtained through MRI or US, and the purpose is to confirm the integrity of the restored tendon in general. Postoperative MRI has a relatively poor diagnostic accuracy compared to that of preoperative images because various materials used in surgeries deteriorate the image quality. US can dynamically check the condition of the restored tendon and avoid artifacts from the surgical instruments used for recovery. Although imaging findings are not always consistent with the clinical symptoms or prognosis, sub-deltoid fluid retention is more important for pain and functional recovery than the thickness of the reconstructed tendon. Strain elastography can also be a useful method for predicting the prognosis.

• Korean Journal of Microbiology
• /
• v.21 no.2
• /
• pp.51-60
• /
• 1983

Cultural characteristics of Strptomyces griseolus isolated from the soil were investigated. This strain was disclosed to utilize D-xylose, and D-glactose in preference order as a carbon source with the formation of glucose isomerase. The addition of sweet potato starch also proved effective promoting the total enzyme activity measured at 29% higher than the control. Corn cob, one of waste agricultural resources, was hydrolyzed in 2~3% $H_2SO_4$ solution at $100^{\circ}C$, 3~5 hours to produce a xylose syrup which gave rise to the recovery of 19.9% in a batch system and 28.2% in a repeated system. By the addition of both 2% of xylose syrup(Be'28) prepared by and us 65% of corn steep liquor (total nitrogen 1.2%), enzyme induction was maximized. The enzyme activity was stimulated by the xylose and the cell growth by the C.S.L. Also, remarkable increase of enzyme activity was noticed by the addition of protein acid hydrolysate 86.2% higher than the control. $QO_2$ of the biomass cultured in 30L capacity jarfermentor recorded low oxygen requirement of 251.2 1/hr. Maximum activity of glucose isomerase was observed noted at the 9th hour after inoculation which is 2 hours faster than the stationery was observed noted at the 9th hour after inoculation which is 2 hours faster than the stationery phase of the biomass growth. Glucose isomerase from the strain was activated by adding the $Co^{++}\;and\;Mg^{++}$ with optimum temperature of $73^{\circ}C$ and pH of 7.2. Conversion ratio of 60% glucose to frutose was 42.5% after 70 hours reaction.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.479-491
• /
• 2018

Shape memory alloys (SMA) exhibit superelasticity which refers to the capability of entirely recovering large deformation upon removal of applied forces and dissipating input energy during the cyclic loading reversals when the environment is above the austenite finish temperature. This property is increasingly favored by the earthquake engineering community, which is currently developing resilient structures with prompt recovery and affordable repair cost after earthquakes. Compared with the other SMAs, NiTi SMAs are widely deemed as the most promising candidate in earthquake engineering. This paper contributes to evaluate the seismic performance of properly designed concentrically braced frames (CBFs) equipped with NiTi SMA braces under earthquake ground motions corresponding to frequently-occurred, design-basis and maximum-considered earthquakes. An ad hoc seismic design approach that was previously developed for structures with idealized SMAs was introduced to size the building members, by explicitly considering the strain hardening characteristics of NiTi SMA particularly. The design procedure was conducted to compliant with a suite of ground motions associated with the hazard level of design-basis earthquake. A total of four six-story CBFs were designed by setting different ductility demands for SMA braces while designating with a same interstory drift target for the structural systems. The analytical results show that all the designed frames successfully met the prescribed seismic performance objectives, including targeted maximum interstory drift, uniform deformation demand over building height, eliminated residual deformation, controlled floor acceleration, and slight damage in the main frame. In addition, this study indicates that the strain hardening behavior does not necessarily impose undesirable impact on the global seismic performance of CBFs with SMA braces.

• Transactions of Materials Processing
• /
• v.27 no.2
• /
• pp.123-129
• /
• 2018

In the present study, the mechanical behavior of the spray-formed high speed steel was investigated employing the internal variable theory of inelastic deformation. Special attention was focused on the effect of the microstructure evolution during the hot working process, such as the distribution of carbides to provide a basic database for the production condition of high speed steels with excellent properties. The billets of high speed steel ASP30TM were fabricated by a spray forming, and the subsequently hot-rolled and heat-treated process to obtain uniformly distributed carbide structure. As noted the spray-formed high speed steel showed relatively coarser carbides than hot-rolled and heat-treated one with fine and uniformly distributed carbide structure. The step strain rate tests and high temperature tensile tests were carried out on both the spray-formed and the hot-rolled specimens, to elucidate their high temperature deformation behavior. The spray-formed high speed steel showed much higher flow stress and lower elongation than the hot-rolled and heat-treated steel. During the tensile test at $900^{\circ}C$, the interruption of the deformation for 100 seconds was conducted to reveal that the recovery was a main dynamic deformation mechanism of spray formed high speed steel. The internal variable theory of the inelastic deformation was used to analyze data from the step strain rate tests, revealing that the activation energies for hot deformation of as-spray-formed and hot-worked steels, which were 157.1 and 278.9 kJ/mol, and which were corresponding to the dislocation core and lattice diffusions of ${\gamma}-Fe$, respectively.

• BMB Reports
• /
• v.35 no.4
• /
• pp.432-436
• /
• 2002

Pseudomonas sp. S-47 is capable of degrading catechol and 4-chlorocatechol via the meta-cleavage pathway. XyITE products catalyze the dioxygenation of the aromatics. The sylT of the strain S-47 is located just upstream of the xylE gene. XylT of the strain S-47 is located just upstream of the xylE gene. XyIT is typical chloroplast-type ferredoxin, which is characterized by 4 cystein residues that are located at positions 41, 46, 49, and 81. The chloroplast-type ferredoxin of Pseudomonas sp. S-47 exhibited a 98% identity with that of P. putida mt-2(TOL plasmid) in the amino acid sequence, but only about a 40 to 60% identity with the corresponding enzymes from other organisms. We constructed two recombinant plasmids (pRES1 containing xylTE and pRES101 containing xylE without xylT) in order to examine the function of XyIT for the reactivation of the catechol 2,3-dioxygenase (XyIE) that is oxidized with hydrogen peroxide was recovered in the catechol 2,3-dioxygenase (C23O) activity about 4 mimutes after incubation, but the pRES101 showed no recovery. That means that the typical chloroplast-type ferredoxin (XyIT) of Pseudomonas sp. S-47 is involved in the reactivation of the oxidized C23O in the dioxygenolytic cleavage of aromatic compounds.