• Korean Journal of Veterinary Research
• /
• v.28 no.1
• /
• pp.105-110
• /
• 1988

To establish a laboratory animal model for study on development of diagnostic methods for infectious bovine rhinotracheitis virus(IBRV), experimental infection of the virus to rabbits immunosuppressed with dexamethasone(DX) were carried out. Results obtained throughout the experiments were as follows. When lymphocyte activity was measured by lymphocyte transformation to phytohaemagglutinin in parallel with total and differential leucocyte counting, both groups treated with 2.0mg DX once and 1.0mg DX daily showed marked immunosuppression between 5 to 72 hrs. after administration. The degree of suppression of lymphocyte activities was more remarkable in the latter group. IBRV PQ7 strain at $10^{7.5}\;TCID_{50}/0.2ml$ was inoculated into conjunctival sacs of rabbits immunosuppressed with DX and non-treated. During 3 weeks observation, the immunosuppressed groups revealed mild conjunctivitis, viremia and virus recovery by 33.3 to 100%, whereas the DX nontreated group showed viremia and virus recovery with no clinical conjunctivitis by one of three rabbits(33.3%). In conclusion, it was indicated that experimental infection of IBRV PQ7 strain to rabbit was limited in prerequisite to immunologic modification by administration of immunosuppressive drugs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.617-622
• /
• 2011

The effect of oxygen on the shape memory characteristics in Ti-18Nb-6Zr-XO (X = 0-1.5 at%) biomedical alloys was investigated by tensile tests. The alloys were fabricated by an arc melting method at Ar atmosphere. The ingots were cold-rolled to 0.45 mm with a reduction up to 95% in thickness. After severe cold-rolling, the plate was solution-treated at 1173 K for 1.8 ks. The fracture stress of the solution-treated specimens increased from 450 Mpa to 880 MPa with an increasing oxygen content up to 1.5%. The fracture stress increased by 287MPa with 1 at% increase of oxygen content. The critical stress for slip increased from 430 MPa to 695 MPa with an increasing oxygen content up to 1.5 at%. The maximum recovery strain of 4.1% was obtained in the Ti-18Nb-6Zr-0.5O (at%) alloy. The martensitic transformation temperature decreased by 140 K with a 1.0 at% increase in O content, which is lower than that of Ti-22Nb-(0-2.0)O (at%) by 20 K. This may have been caused by the effect of the addition of Zr. This study confirmed that addition of oxygen to the Ti-Nb-Zr alloy increases the critical stress for slip due to solid solution hardening without being detrimental to the maximum recovery strain.

• Structural Engineering and Mechanics
• /
• v.59 no.1
• /
• pp.37-57
• /
• 2016

Reservoir geomechanics can play an important role in hydrocarbon recovery mechanism. In $CO_2$-EOR process, reservoir geomechanics analysis is concerned with the simultaneous study of fluid flow and the mechanical response of the reservoir under $CO_2$ injection. Accurate prediction of geomechanical effects during $CO_2$ injection will assist in modeling the Carbon dioxide recovery process and making a better design of process and production equipment. This paper deals with the implementation of a program (FORTRAN 90 interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators, using a partial coupling algorithm. A geomechanics reservoir partially coupled approach is presented that allows to iteratively take the impact of geomechanics into account in the fluid flow calculations and therefore performs a better prediction of the process. The proposed approach is illustrated on a realistic field case. The reservoir geomechanics coupled models show that in the case of lower maximum bottom hole injection pressure, the cumulative oil production is more than other scenarios. Moreover at the high injection pressures, the production rates will not change with the injection bottom hole pressure variations. Also the FEM analysis of the reservoir showed that at $CO_2$ injection pressure of 11000 Psi the plastic strain has been occurred in the some parts of the reservoir and the related stress path show a critical behavior.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.384-391
• /
• 2005

The nickel-based alloy Nimonic 80A possesses the excellent strength, and the resistance against corrosion, creep and oxidation at high temperature. Its products are used in aerospace engineering, marine engineering and power generation, etc. Control of forging parameters such as strain, strain rate, temperature and holding time is important because change of the microstructure in hot working affects the mechanical properties. Change of the microstructure evolves by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range of $0.05\~5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range $0.05,\;5s^{-1}$, holding time range of 5, 10, 100, 600 sec using hot compression tests. Modeling equations are proposed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters in modeling equations are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of the initial grain size and holding time. The modeling equations developed were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The grain size predicted from FE simulation results is compared with results obtained in field product.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.290-294
• /
• 2002

The present work describes the improvement of an erythritol-producing strain to lower the formation of glycerol, which is a characteristic by-product of the strain and could cause difficulties in the recovery and purification of the final product. The yeast-like fungi Moniliella suaveolens var. nigra, isolated previously in the same laboratory from beehives, was mutated by exposing it to a 4 g/L NTG solution. From a total of 2000 mutated strains, Em6j30-14 was selected as the one having the most desirable properties. Cultivating the strain for seven days in 300 mL flasks containing 30 mL of a 400 g/L glucose medium resulted in an erythritol yield of 43%. The glycerol yield was 5%, which is a value 50% lower as compared with the wild type. However, attempts to reproduce the above results in a 5L-fermenter failed, resulting in a similar erythritol concentration but a much higher formation of glycerol. Possible reasons for such a different behaviour could be oxygen limitation or the aggregation of cells, but the exact mechanism could not yet be identified. Foam formation, which is another major problem in large-scale fermentation, tended to be much lower for the mutant strain.

• YAKHAK HOEJI
• /
• v.37 no.2
• /
• pp.129-135
• /
• 1993

Serratia sp. Y-4 was isolated from soil. Many characteristics of the strain and optimum cultivation condition for protease production were investigated.,The protease from Serratia sp. Y-4 was purified and studied for the properties of the enzyme. The isolated strain was identified to the genus Serratia. The strain was cultivated in 1%-casein, 0.5%-Na$_{3}$PO$_{4}$.7H$_{2}$O, 0.1%-NaCl, 0.05%-KCI, 0.02%-MgSO$_{4}$.7H$_{2}$O, 0.02%-CaCl$_{2}$.2H$_{2}$O, 0.02%-ZnSO$_{4}$.7H$_{2}$O, 0.02%-MnCl$_{2}$.4H$_{2}$O and 0.5%-soy bean oil at pH 7.0 for 35 hrs. The enzyme was purified about 5.89 fold from the culture broth with 31.1% recovery and 19,613 u/mg through ultrafiltration, ammonium sulfate, DEAE-sephacel and Superose-12 chromatography. The purified enzyme was identified as one band by isoelectric focusing, SDS- and native-PAGE. It has maxium activity at $37^{\circ}C$ and pH 9.0. Molecular weight of it is approx. 50 kD and pl is about 6.70. Its Km value for casein was 20 mg/ml. 5 mM-EDTA, 5mM-SDS, Ag$^{+1}$, Cu$^{+2}$, Hg$^{+2}$ and Pb$^{+2}$ inhibited the enzyme.

• The Journal of the Korean Society for Microbiology
• /
• v.20 no.1
• /
• pp.103-107
• /
• 1985

Female ICR mice were vaccinated against Toxoplasma gondii(RH strain), infected 2 weeks later and after recovery mated to normal ICR males. Control matings were with normal ICR females. The progeny of the above matings were weaned at 1 week, vaccinated at 1, 2, 3, 4 or 5 weeks of age and infected 2 weeks later with lethal Toxoplasma tachyzoites. As assessed by survival, the effectiveness of vaccination among offspring of vaccinated-recovered mothers was greatly impaired than that of control mice, with respective of age : where mice did survive, recovery was greatly delayed relative to the controls. The protective effect of vaccination among infants born to control mothers was also blocked by maternal specific antibodies, by administration of high-titered specific antibodies or by transfer of nylon wool adherent immune-spleen cells, but was augmented by transfer of nylon wool passed immune-spleen cells. These results indicate that this impairment of vaccination may be due to the transmission of maternal specific antibodies to the offspring which acts to suppress both priming by the vaccine and the generation of parasite-specific helper T cells.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.583-589
• /
• 2016

In this study, recrystallization behaviors in the two-phase (${\alpha}+{\gamma}$) region of micro-alloyed steels such as Base, Nb, TiNbV and CAlN were investigated in terms of flow stress, microstructure and associated grain boundary characteristics. The flow stress of all specimens reached peak stress and gradually decreased, which means that recrystallization or recovery of proeutectoid deformed ferrite and recovery or transformation to ferrite of deformed austenite occurred by thermal activation. The precipitation of carbide or nitride via the addition of micro-alloying elements, because it reduced prior austenite grain size upon austenitization, promoted transformation of austenite to ferrite and increased flow stress. The strain-induced precipitation under deformation in the two-phase region, on the other hand, increased the flow stress when the micro-alloying elements were dissolved during austenitization. The recrystallization of the Nb specimen was more effectively retarded than that of the TiNbV specimen during deformation in the two-phase region.