• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.193-200
• /
• 2003

In this study a general Galerkin FE formulation of the incompressible Reynolds equation is derived for lubrication analyses of noncontacting mechanical face seals. Then, the formulation is applied to analyze the flexibly mounted stator-type reactor coolant pump seals of local nuclear power plants, which have deep straight grooves or plane coning on their primary seal ring faces. Their various lubrication performances have been predicted. Results show that the analyzed deep straight groove seal should have a net coning of less than $0.6\;{\mu}m$ to satisfy the leakage limit. And for the same amount of equilibrium opening force the plane coning seal requires to have a 3 times higher dimensionless coning than the deep straight groove seal.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.311-320
• /
• 2003

In this study a general Galerkin FE formulation of the incompressible Reynolds equation is derived for lubrication analyses of noncontacting mechanical face seals. Then, the formulation is applied to analyze the flexibly mounted stator­type reactor coolant pump seals of local nuclear power plants, which have deep straight grooves or plane coning on their primary seal ring faces. Their various lubrication performances have been predicted. Results show that the analyzed deep straight groove seal should have a net coning of less than 0.6 to satisfy the leakage limit. And for the same amount of equilibrium opening force the plane coning seal requires to have a 3 times higher dimensionless coning than the deep straight groove seal.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.3
• /
• pp.253-259
• /
• 2010

Leakage characteristics of two labyrinth seals with different configurations (straight vs stepped) were investigated. Leakage flows were predicted by computational fluid dynamics (CFD) for the two configurations and compared with test data. A semi-analytical leakage prediction tool was also tried to predict the leakage. It was confirmed that the CFD gives quite good agreements with test data. The analytical tool also yielded similar leakage behaviors with test results, but the overall agreement with test data was not as good as that of the CFD. The effect of flow direction in the stepped seal on leakage flow was examined. The dependence of leakage performance, in terms of flow function, on the seal clearance size was investigated. Flow function decreased with decreasing clearance in the straight seal, while the trend was reversed in the stepped seal.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.857-862
• /
• 2009

In this study, the numerical study has carried out to analyze the leakage in a steam turbine labyrinth seal. We modified tooth shape of the labyrinth seal and finds out difference of leakage in this study. Original model is straight labyrinth seal and its modified model is slant labyrinth seal. The numerical analyses are implemented on two models. The numerical results show that each leakage of tooth shape are found 0.4781 kg/s and 0.4485 kg/s, respectively. Slant labyrinth seal seals in a steam better than straight labyrinth seal. Since, actual clearance of the stream function in the slant model is smaller than the straight model.

• Plant Journal
• /
• v.5 no.2
• /
• pp.56-61
• /
• 2009

In this study, the numerical study has been carried out to analyze the leakage in a steam turbine labyrinth seal. We modified tooth shape of the labyrinth seal and find out the difference of leakage in this study. Original model is straight labyrinth seal and its modified model is slanted labyrinth seal. The numerical analyses are implemented on two models. The numerical results show that each leakage of tooth shape are found to be 0.4781 kg/s and 0.4485 kg/s, respectively. The slanted labyrinth seal confines in a steam better than straight labyrinth seal. Since actual clearance of the stream function in the slant model is smaller than that of the straight model.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.400-408
• /
• 2009

Optimization of seal geometries can reduce significantly the energetic losses in a hydraulic seal [1], especially for high head runner turbine. In the optimization process, a reliable prediction of the losses is needed and CFD is often used. This paper presents numerical experiments to determine an adequate CFD model for straight, labyrinth and stepped hydraulic seals used in Francis runners. The computation is performed with a finite volume commercial CFD code with a RANS low Reynolds turbulence model. As numerical computations in small radial clearances of hydraulic seals are not often encountered in the literature, the numerical results are validated with experimental data on straight seals and labyrinth seals. As the validation is satisfactory enough, geometrical optimization of hydraulic seals using CFD will be studied in future works.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.240-248
• /
• 2011

Mechanical face seal installed in primary heat transport pump used for heavy water reactor prevents leakage of working fluid using thin working fluid film between primary seal ring and mating ring. If the leakage of working fluid exceeds the allowable volume, serious accident can be happened by the trouble of primary heat transport pump. The thinner fluid film exists between primary seal ring and mating ring, the less working fluid leaks out. On the other hand, if the thickness of fluid film is not enough, the life of mechanical face seal will be reduced by friction and wear. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the performance of mechanical face seals which have same deep straight groove and 11 different net coning values. As results, equilibrium clearance between primary seal ring and mating ring, leakage volume of working fluid, friction torque on sealing surface and stiffness of working fluid film were obtained. With increasing net coning value, equilibrium clearance and leakage volume increase, and friction torque and stiffness of fluid film decrease.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.776-779
• /
• 2002

A bellows diaphragm design program for mechanical seal was developed in this study. This program was written in AutoLISP on the AutoCAD system with a personal computer. Basic design concept used in this program is composition of a convolution that is tangent to two lines and five circles from given design parameters(initial radius, inner and outer diameter, thickness, pitch, etc.). The effects of altering some design parameters on stress distribution of bellows were estimated using commercial FEM code, NISAII. As a result, the bellows diaphragm for mechanical seal was successfully designed by the program. The FEM result shows that stress is dependent on straight line length and bellows diameter with same span.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.401-408
• /
• 2003

A CAD program for metal bellows diaphragm was developed in this study. This program was written in AutoLISP on the AutoCAD system with a personal computer. Basic design concept used in this program is composition of a convolution that is tangent to two lines and 5 circles from given design parameters(initial radius, inner and outer diameter, thickness, pitch, etc.). The effects of altering some design parameters on stress distribution and fatigue life of bellows were estimated using commercial FEM code, NISAII. As a result, the metal bellows diaphragm was successfully designed by the CAD program. It is used to model a bellows geometry in pre-processor of FEM code. The FEM result shows that stress is dependent on straight line length, bellows diameter with same span, and fatigue life is also affected by design parameters.

• Journal of the Korean Society of Costume
• /
• v.56 no.8 s.108
• /
• pp.74-82
• /
• 2006

In ancient China, Su(綬) was the ornament of the full dress. It had originated from tying the jade or another thing before Jen(秦:Qin) dynasty and it tied the imperial jade seal and the chop from Han dynasty. Su of Han dynasty was different in the inscape, colour, length and density according to the grade. And the shape was the straight line. But these phenomena were changed after Han dynasty. This study showed how it changed. To studying used the comparison method of literature records, paintings and archeological relics. It mostly studied imperial Su. Su of Han dynasty of the high grade was formed by Yeok, the circle type jade and Su(Su moaned whole Su, at the same time moaned the part of Su, too). Afterward, Yeok was changed into Small Su[小綬] and Su was changed into Big Su(大綬). Originally the circle type jade was connecting Yeok to Su, but it was changed into tying Small Su only. Su of Han dynasty used the four kinds of colour, but from Su(隋: Sui) dynasty used the six kinds of colour. Originally Su was interlacing, but it was changed into the silk fabric from Song[宋] dynasty. According to using silk fabric's Su, it was likely to disappear the system distinguishing the grade by length. And it kept the method of interlacing the reticulation in the low part of silk fabric's Su. So, after using silk fabric's Su, the system of the density was not about the main body but about the reticulation. Su was been used woven with supplementary golden wefts, too. The circle type jade was chiseled the dragon and cloud from Geum[金:Jin] dynasty. These not the pattern of silk fabrics.