References
- Rhode, D.L., S.H. Ko, and G.L. Morrison, 1994, "Leakage optimization of labyrinth seals using a Navier-Stokes code," Tribology Transactions, Vol. 37, No. 1, pp. 105-110. https://doi.org/10.1080/10402009408983272
- Rhode, D.L., J.W. Johnson, and D.H. Broussard, 1997, "Flow visualization and leakage measurements of stepped labyrinth seals : Part 1-Annular Groove," Journal of Turbomachinery, Vol. 119, No. 4, pp. 839-843. https://doi.org/10.1115/1.2841195
- Rhode, D.L., J.W. Johnson, and D.H. Broussard, 1997, "Flow visualization and leakage measurements of stepped labyrinth seals : Part 2-Sloping Surfaces," Journal of Turbomachinery, Vol. 119, No. 4, pp. 844-848. https://doi.org/10.1115/1.2841196
- Lang, J.H., 1964, "Investigation of discharge coefficient for different labyrinth seal," Dominion Engineering Works, 53-1256BT.
- Vu, T., 1976, "Analysis of straight seal tests," Dominion Engineering Works, 1230-7.
- Vu, T., 1978, "Viscous seal : theoretical analysis and computer program," Dominion Engineering Works, 1230-18.
- Vu, T., 1978, "Straight seal analysis and computer program," Dominion Engineering Works, 1230-17.
- Elrod, H.G., 1973, "Some refinements of the theory of the viscous screw pump," ASME Trans. J. Lubric. Technol., Vol. 95, No. 1, pp. 82-93. https://doi.org/10.1115/1.3451741
- Elrod, H.G. and C.W. Ng, 1967, "A Theory of Turbulent Films and its Application to Bearings," ASME J. Lubr. Technol., Vol. 89, No. 1, pp. 347-362.
- Rhode, D.L. and G.H. Nail, 1992, "Computation of cavity by cavity flow development in generic labyrinth seals," Journal of Tribology, Vol. 114, No., pp. 47-51. https://doi.org/10.1115/1.2920866
- Asok, S.P., et al., 2007, "Neural network and CFD-based optimization of square cavity and curved cavity static labyrinth seals," Tribology International, Vol. 40, No. 7, pp. 1204-1216. https://doi.org/10.1016/j.triboint.2007.01.003
- Schramm, V., et al., 2004, "Shape optimization of a labyrinth seal applying the simulated annealing method," International Journal of Rotating Machinery, Vol. 10, No. 5, pp. 365-371. https://doi.org/10.1155/S1023621X04000375
- Morrison, G.L., M.C. Johnson, and G.B. Tatterson, 1991, "3-D laser anemometer measurements in a labyrinth seal," Journal of Engineering for Gas Turbines and Power, Vol. 113, No. 1, pp. 119-125. https://doi.org/10.1115/1.2906518
- Chochua, G., W. Shyy, and J. Moore, 2002, "Computational modeling for honeycomb stator gas annular seal," Int. J. Heat Mass Transfer, Vol. 45, No. 9, pp. 1849-1963. https://doi.org/10.1016/S0017-9310(01)00280-0
- Kaye, J. and E.C. Elgar, 1958, "Model of adiabatic and diabatic fluid flow in annulus with an inner rotating cylinder," Transactions of ASME, Vol. 80, No. 1, pp. 753-765.
Cited by
- Investigations of Compressible Turbulent Flow in a High-Head Francis Turbine vol.140, pp.1, 2018, https://doi.org/10.1115/1.4037500
- Compressible Large Eddy Simulation of a Francis Turbine During Speed-No-Load: Rotor Stator Interaction and Inception of a Vortical Flow vol.140, pp.11, 2018, https://doi.org/10.1115/1.4039423