• Steel and Composite Structures
• /
• 제11권4호
• /
• pp.291-305
• /
• 2011

The new structure consisting of continuous compound spiral hoop reinforced concrete (CCSHRC)column and steel concrete composite (SCC) beam has both the advantages of steel structures and concrete structures. Two types of beam-to-column connections applied in this structural system are presented in this paper. The connection details are as follows: the main bars in beam concrete pass through the core zone for both types of connections. For connecting bar connection, the steel I-beam webs are connected by bolts to a steel plate passing through the joint while the top and bottom flanges of the beams are connected by four straight and two X-shaped bars. For bolted end-plate connection, the steel I-beam webs are connected by stiffened extended end-plates and eight long shank bolts passing through the core zone. In order to study the seismic behaviour and failure mechanisms of the connections, quasi-static tests were conducted on both types of full-scale connection subassemblies and core zone specimens. The load-drift hysteresis loops show a plateau for the connecting bar connection while they are excellent plump for bolted end-plate connection. The shear capacity formulas of both types of connections are presented and the values calculated by the formula agree well with the test results.

• 한국수산과학회지
• /
• 제1권2호
• /
• pp.129-133
• /
• 1968

The writer reviewed the cutting method of webbing practiced in major countries. Cutting rhythm Bar cutting to Point Cutting) should be chosen to approach as straight as possible, therefore the knot cuttings or the side cuttings should be 1, if possile. According to calculation, an arbitrary solution to a mixed cutting was undertaken, while another cutting method, of calculation 5 and 6, was taken by a prepared table. In no case, it was consequently possible to use an unmixed cutting rhythm. Sometimes, the cutting calculated from approximate value differs from desired result, tut this defference should not be taken too significant in practice.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.24-28
• /
• 1996

In this paper, a new measurement system has been developed for measuring servo errors of CNC machine tools. Unlike the ball link bar method using circular path, the developed system uses two orthogonal straight paths for measurement of errors, giving relatively short test length. For position measurment, linear displacement sensor and steel cube have been designed, and the software for relevant data sampling and error evaluation has been implemented.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.55-63
• /
• 2006

The purpose of this study is to prove the kinematical characteristics of Deff motion, the high bar performance, in terms of flying phases so that we can provide basic sources for improving gymnastic performance. To do this, we selected and analyzed the performance of two athletes who did Deff motion in the high bar competition of male artistic gymnastic in the 22nd Universiade 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using a high speed video camera. To make a successful performance, a performer releases the bar at a height of a high bar vertically and at a height of 82cm horizontally, and the flying performance should be made without moving forward, as maintaining the proper balance, in order to rise over 118cm high during the flying phase. When the performer is releasing the bar, an increase of the vertical speed in the center of the body and extension of a knee joint and a hip joint contribute to increasing a flying height. And when the moving body is twisted, leaning to left side is caused by the winding movement of a knee joint, which causes an unstable bar grasp. To grasp the bar stably, just before releasing the performer should gain propulsive force from twisting rotation through increasing the speed of shoulder rotation. And before the peak point, the performer should make sure of a body rotation distance over $164^{\circ}$ so that he or she can do an aerial rotary performance smoothly. When grasping the high bar, the center of the body should be above the bar and the angle of shoulder rotation should be maintained close to $540^{\circ}$ simultaneously. he high point performance(S1) has more speed on an ascending phase and less speed on a descending phase than the low point performance (S2). At the peak point, both the rotation angle of the body and that of the shoulder in high point performance are big as well. In conclusion, it is shown that a performer can make a jump toward the high bar easily with the body straight because the performer can hold the upper part of the body erect early in a descending phase.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.244-251
• /
• 2016

본 연구에서는 폼 모니터의 유로 형상에 따라 유동 특성 및 분사거리에 비치는 영향을 수치적 해석기법인 유동해석을 통해 예측, 비교하고 실제 분사 성능 시험을 통해 검증하였다. 폼 모니터의 유로 형상에 따라 유체의 유동 양상이 달라지며, 유동손실이 발생함에 따라 분사거리에 영향을 미치는 것을 수치해석을 통해 계산하였다. 폼 모니터의 기본 형상은 N사에서 설계한 형상을 사용 하였고, 변경모델은 유로의 길이를 증가시킨 모델과 직선형태의 모델을 사용하였다. 입구압력은 6.5bar를 주었고, 계산 결과 유로의 길이를 증가시킨 모델과 직선형상 모델 모두 노즐에서의 분사거리가 향상되었다. 분사 성능시험결과와 비교한 결과 오차율은 7.43%로 비교적 잘 일치 하여 해석 기법의 타당성을 검증하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.62-67
• /
• 2022

Liquid hydrogen (LH₂) has a higher density than gaseous hydrogen, so it has high transport efficiency and can be stored at relatively low pressure. In order to use efficient bulk hydrogen in the industry, research for the LH₂ supply system is needed. In the high-pressure hydrogen station based on LH₂ currently being developed in Korea, a heat exchanger is used to heat up supercritical hydrogen at 700 bar and 60 K, which is pressurized by a cryogenic high-pressure pump, to gas hydrogen at 700 bar and 300 K. Accordingly, the heat exchanger used in the hydrogen station should consider the design of high-pressure tubes, miniaturization, and freezing prevention. A helical heat exchanger generates secondary flow due to the curvature characteristics of a curved tube and can be miniaturized compared to a straight one on the same heat transfer length. This paper evaluates the heat transfer performance through parametric study on the distance between coils, guide effect, and anti-icing design of helical heat exchanger. The helical heat exchanger has better heat transfer performance than the straight tube exchanger due to the influence of the secondary flow. When the distance between the coils is uniform, the heat transfer is enhanced. The guide between coils increases the heat transfer performance by increasing the heat transfer length of the shell side fluid. The freezing is observed around the inlet of distribution tube wall, and to solve this problem, an anti-icing structure and a modified operating condition are suggested.

• 한국환경복원기술학회지
• /
• 제20권6호
• /
• pp.107-115
• /
• 2017

This study illustrated the process of bar structure and vegetation coverage to understand historical changes of riverbed and suppose adaptive management in Tan-chun ecological landscape reserve. The study site that lower reach of the Tan-chun are known as habitats of migratory bird and aquatic species with dynamic riverbed. Aerial photos from 2006 to 2016 and surveyed vegetation data in 2006 and 2016 were used by analysis of landscape changes and comparison of vegetation coverage. Study area is classified into 3 sites (A: straight site, B: meandering site, C: meandering and junction with Yangjae-cheon). The result showed that bar area of A and C sites gradually increased, B site decreased during 10 years. Also, ratio of bar area to vegetation coverage and level of vegetation coverage increased in all sites during 10 years. All sites seem to have experienced the terrestrialization with time. On the other hand, ratio of annual vegetation increased and ratio of perennial vegetation decreased in C site in 2016 compare to 2006. Because area of Japanese Hops (Humulus japonicas) as one type of annual vegetation increased, other vegetation could not grow up by its powerful expandability. It is time to make active adaptive management based on not only continuos monitoring but also revaluation of river conditions in order to enhance habitat quality and quantity in Tan-chun ecological landscape reserve.

• 한국BIM학회 논문집
• /
• 제11권1호
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.

• 전산구조공학
• /
• 제5권4호
• /
• pp.133-142
• /
• 1992

외측 보-기둥 접합부에 정착된 곧은 보 주철근의 인발거동을 예견하기 위한 해석모델이 개발되었다. 이 모델은 외측조인트에 수직방향으로 콘크리트를 구속하기 위하여 횡방향 철근을 배치한 상태의 구속조건(confined condition)하에서 이형철근의 부착특성에 관한 정착철근의 직경, 콘크리트 압축강도, 항복강도, 철근간격 및 주압력(column pressure)에 대한 영향을 고려할 수 있는 국부부착에 관한 시뮬레이션을 구체화하였다. 이 연구에서 채택된 해석 기법은 횡방향 철근이 배근된 공시체에 매입한 곧은 이형철근에 대한 인발실험의 결과를 만족하게 예견하였다. ACI-ASCE 352 위원회가 제안하고 있는 외측조인트 상태에서의 정착 철근길이에 관한 규정이 개발된 해석접근법을 사용해 평가 되었다. 이 해석 평가의 결과는 현재의 외측조인트의 구속조건에서의 정착길이에 대한 규정이 너무 안정적인 측면에 있다는 것을 암시하고 있다.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.415-422
• /
• 2001

A seedling pick-up device for vegetable transplanters was developed and its work performance was evaluated at the laboratory. The pick-up device extracts seedlings from a 200-cell tray of seedlings and transfers them to the place where they are to be transplanted into the soil. The device consists of a path generator, pick-up pins and a pin driver. The path generator is a five-bar mechanism comprised of a fixed link, a driving link, a driven link, a connecting link and a slider. The slider is constrained to move along the driven link and a fixed slot of combined straight-line and circular paths. The connecting link joins the driving link and the slider. When the slider moves along the straight-line path of the slot it takes seedlings out from the cell and transfers them to the transplanting hopper when moving along the circular path. A proto-type of the pick-up device was built and tested under the various operational conditions such as age of seedling, approach direction and penetration depth of pins to the cell, holding method of seedling and extracting velocity. The device extracted 30 seedlings per minute with the maximum success ratio of 97% using the seedlings of 23 days old. Some design details were also discussed and suggested to enhance the performance of the device.