• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.117-124
• /
• 2005

Appropriate removal of pollutants from combined sewer overflows(CSOs) and stormwater runoff is of primary concern to watershed managers trying to meet water quality standards even under a wet weather condition. Harmful substances associated with particles besides TSS and BOD are subjected to removal prior to discharge into the natural waters. Effectiveness of five major hydrodynamic separation technologies, Vortechs, Downstream Defender including Storm King for CSOs control, CDS, Stormceptor, and IHS, were evaluated in this study. There is not sufficient information for accurate evaluation of the removal efficiency for the pollutants from the stormwater runoff and CSOs. Based upon limited engineering data, however, all technologies were found to be effective in separation of heavy particles and floating solids. Technologies utilizing screens seem to have advantage in the treatment capacity than the other technologies relied fully on hydrodynamic behavior. The IHS system seems to have a strong potential in application for control of CSOs because of unique hydrodynamic behavior as well as a flexibility in opening size of the screens. Size of the particulate matter in the CSOs and stormwater runoff is found to be the most important parameter in selection of the type of the hydrodynamic separators. There exists an upper limit in the solids removal efficiency of a hydrodynamic separator, which is strongly dependent upon the particle size distribution of the CSOs and stormwater runoff.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.585-593
• /
• 2013

This study aims to investigate inundation characteristics such as inundated area, inundation depth according to variation in return period of design rainfall and to draw a comparison between the inundation characteristics by adapting design storm using dual-drainage model. Lidar data is used to construct terrain data with $1m{\times}1m$ resolution in Cheongju. The designed storm by return periods(10year, 30year, 50year and 200year) are acquired from Intensity Duration Frequency curve, which are distributed in 5 minutes interval using Huff's method. As a results, the inundation volume is linearly increased, but inundated area is gradually increased in accordance with swell of return period for design storm. On the other hands, as a result of calculating discharge capacity for each points, deficit of discharge capacity is not observed using designed storm of 10 year return period at every points. If the return period is increased up more than 10 years, both the deficit of discharge capacity for each PT and entire study area are enlarged drastically.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1089-1094
• /
• 2009

The SWMM (Storm Water Management Model) was applied to Princeton University campus, USA to predict the change of the runoff characteristics. Topography and infra structure of urban area are used in detail and watershed is made as form of regular square to improve the efficiency of data. Princeton campus was divided into 131 sub-basins and model input parameters were obtained from DEM (Digital Elevation Model), land use type, and campus management map, etc.. The model was validated based on the measured meteorological data. The validated model was used to analyze the change of the runoff characteristics according to urbanization, which are two different scenarios: 50% and 100% increase of impervious area. The increase of impervious area causes the increase of runoff, especially in the first-flush.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.269-269
• /
• 2023

기후 변화로 인한 강우 패턴의 변화는 도심지 방재성능 목표를 상회하는 홍수로 이어져 침수피해를 가중시키고 있다. 이로 인한 도시침수 피해를 저감하기 위하여 도시침수 예측모형 개발이 활발히 이루어지고 있으나, 대규모 관망으로 이루어진 복잡한 도심지 우수관망을 모의하기 때문에 분석속도가 느려 실시간 예측 적용에 한계점이 있다. 도시침수 분석에 가장 많이 활용되는 대표적인 모형인 SWMM(Storm Water Management Model)은 복잡한 관망을 비교적 빠르고 정확히 해석할 수 있어 유용하지만, 이 또한 대도심의 우수관망 모의 시 많은 시간이 소요되며, 관망 정밀도 기준이 정의되어 있지 않아 분석에 어려움이 있다. 이러한 문제점을 해결하기 위하여 본 연구에서는 관망 간소화 기법(유역면적의 밀도, 관거 직경, 관로의 길이 등)을 적용하고, 이에 따른 주요 지선과 간선의 수위 변화와 침수흔적도를 비교하여 분석결과의 정확성을 담보하는 관망 간소화 수준을 파악하고 도시침수 분석 시 적정 간소화 기준과 자동 간소화 방안을 제시하고자 한다. 도시침수 분석 시 우수관망 자동 간소화를 위하여 Python을 활용한 코드를 작성하였으며, SWMM의 .inp 파일을 읽어들여 Dataframe형태로 저장한 후 분석을 위한 데이터 가공, 간소화 기준에 따른 분류, 간소화 대상 수리·수문인자 연산, 인접 간선에 연결, 간소화된 .inp파일 저장의 총 6단계로 구성하였다. 연구 대상지역은 도림천 유역으로 설정하였으며, 초기자료는 맨홀 30,469, 관거 32,443, 소유역 30,586개로 이루어져 있으며, 모의 시간은 약 2시간 30분이 소요되었다. 유역면적 100x100 미만을 대상으로 수행 시 맨홀 9,965, 관거 10,464, 소유역 9,240개로 관거의 복잡도가 약 1/3 감소하였으며, 모의 시간은 약 43분으로 기존대비 약 72% 단축되는 것으로 나타났다. 실제 침수가 발생한 주요지점들을 비교한 결과 R² 0.85 ~ 0.92로 예측모형의 정확도에 큰 영향을 끼치지 않는 것으로 나타났다. 도시침수모형 최적 간소화를 통해 모형의 복잡성을 줄이고, 계산량을 줄여 모형의 수행시간을 단축시킬 수 있으며, 불필요한 우수관망을 제거하거나 병합함으로써, 모형의 예측력 향상과 분석과 해석에 효율적으로 사용될 수 있을 것으로 기대한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1585-1589
• /
• 2009

최근 빈발하는 국지성 호우나 태풍에 의한 집중호우로 도시지역의 내배수불량으로 인하여 저지대 및 지하공간의 침수현상이 빈번히 야기하고 있는 실정이다. 특히 연안이나 외수위의 영향으로 강제배수가 요구되는 지역인 경우에는 개발에 앞서 선결해야할 중요한 재해저감대책 중의 하나이다. 이에 본 연구에서는 연안의 해수면 및 하천 홍수위로 인한 계획단지 내 배수관로의 동수위 산정을 위한 유출모의를 수행하였다. 연안저지대의 순성토 지역인 경우 동수위 계산에 따른 성토량에 의한 비용이 전체 공사비 결정 요인의 가장 큰 부분을 차지하고 있으므로 이에 따른 경제적이면서 치수안전도를 증가시킬 수 있는 계산 방법을 정립하는 것은 선결되어야 할 문제이다. 이를 위해 도시유역에 범용적으로 사용되고 있는 SWMM 모형을 활용하였다. SWMM 모형 중에서 EXTRAN 블록을 통한 유출모의는 관거내 동수경사를 계산하여 배수, 역류, 압력류, 월류까지도 모의할 수 있다. 다양한 조건으로 배수관로의 설계를 통한 동수위와 성토고를 분석하여 조건별 경제성과 치수안전도를 검토할 수 있으나 관로 크기, 경사, 방향 등을 우선하여 변경해가면서 최적안을 확인하였다. 검토된 계산 절차에 따라서 향후 지형적으로 유사한 지역에서의 배수시스템 설계에 적용 및 기존 배수관망 재설계 및 확장 등의 검토에 효과적으로 적용할 수 있을 것이다.

• Water for future
• /
• v.28 no.3
• /
• pp.197-204
• /
• 1995

The runoff from an urban catchment is increased because of the gravitation of the population towards cities. For this reason, water level increment in confluence area makes it impossible to drain internal water and thus produces flood out in upstream areas. In this study, flow variations of main channel are measured which is caused by combining storm sewer into main channel in small watershed. Depth increment in main stream is analyzed due to flowrate and slope in main channel and flowrate, slope is getting steeper, and also due to low flowrate in main stream and high flowrate in tributrary channel. For the degree of confluence, depth ratio decreases when the degree is getting small. As mentioned above, main factors influencing the depth ratio increment of confluence channel are in the order of the degree of confluence, and the flowrate of tributary channel and main channel.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.9-15
• /
• 2007

As environmental problems and water-shortage phenomenon become a global issue, many states look for the effective method to use water resources. So, decentralized rainwater management is recognized as a new water management system that rainwater can be infiltrated and used on-site. But it is little difficult to build a park, lake, and forest for evaporating rainwater in city because the land price of city is very high. In order to build an excellent infiltration system for a dwelling and a park in Korea, KICT has developed Linear infiltration system. This infiltration system is consist of first flush treatment, storage and infiltration, overflow control system. These elements are connected closely and working as a combined system. A storm sewer can be changed by the linear infiltration system. This study is to show real application idea about Linear infiltration system with improving some detail in apartments. For this purpose, we devide application idea into the artificial ground and the natural ground and each ground type, suggest a method to cooperate with the other landscape and linear infiltration system. Through this study, we came to recognize a recognition difference of an expert and a commoner about decentralized rainwater management.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.339-342
• /
• 2000

Recently, the importance of the conutermeasures for waste materials has pointed out. Waste glass is also one to waste materials used for the recycling in construction sites. The crushed waste glass has been used to make a glass polymer composite that can be applied for sewer, storm drain pipe and interlocking block, etc. In this study, the crushed waste glass is explored with the possibility of recycling it, as a substitute for fine aggregates. The prepose of this investigation is to improve the strengths and acid resistance of the UP mortars using crushed waste glass. The UP mortars are prepare with blast furnace slag fly ash filler. the UP-fine aggregate ratios the crushed waste glass replacements for fine aggregate are tested strengths before and after immersion(H (아래첨자2)SO(아래첨자4) 10%), weight change and acid resistance are also tested. From the test results, the relative strength or UP mortars using fly ash as filler are found to be somewhat superior to that of the UP mortars using blast furnace as filler, And a UP mortar with fly ash as a filler, a UP-fine aggregate ratio of 15% and a waste glass replacement if 50% for fine aggregate is recommended as optimal mix proportion of UP mortar using crushed waste glass. Accordingly, it is enough to assure the use of the crushed waare glass as an aggregate for the production of UP mortar.

• KIEAE Journal
• /
• v.6 no.3
• /
• pp.3-10
• /
• 2006

As environmental problems and water-shortage phenomenon become a global issue, many states look for the effective method to use water resources. So, decentralized rainwater management is recognized as a new water management system that rainwater can be infiltrated and used on-site. But it is little difficult to build a park, lake, and forest for evaporating rainwater in city because the land price of city is very high. In order to build an excellent infiltration system for a dwelling and a park in Korea, KICT has developed Linear infiltration system. This infiltration system is consist of first flush treatment, storage and infiltration, overflow control system. These elements are connected closely and working as a combined system. A storm sewer can be changed by the linear infiltration system. This study is to make design guideline using Linear infiltration system in apartment house. So ATV-DVWK-M13, FLL and present condition of Korean rainwater system were analyzed and the guidelines direction were set up. Through this study, a foundation is prepared to build the decentralized rainwater management of apartment house.

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.483-490
• /
• 2017

This paper studies on the behavior of reinforced concrete (RC) pipes used in basic sanitation in the conduction of storm water and sanitary sewer. Pipes with 800 mm and 1200 mm in diameter were analyzed. The 800 mm pipes were built with simple reinforcement and the 1200 mm pipes with double reinforcement. For the two diameters of pipes the presence or absence of the pocket was evaluated, and the denomination of each one is spigot and pocket pipe (SPP) and ogee joint pipe (OJP), respectively. The 3D numerical models reproduce the three-edge-bearing test that provides information about the strength and stiffness of the reinforced concrete pipes. The validation of the computational models was carried out comparing the vertical and horizontal displacements on the springline and crown/invert and it was also evaluated the reinforcement strains and the crack pattern. As a main conclusion, the numerical models represented satisfactorily the behavior of the pipes and can be used in future studies in parametric analysis.