• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.864-871
• /
• 2014

Seed viability is affected by storage conditions and rapid loss of viability in storage is the major cause for low germination. This study was carried out to examine the effect of packaging materials and storage temperature on seed germination rate over 10 years in two species (Capsicum annuum L. and Brassica rapa L. ssp. pekinensis) and determine effective storage conditions for maintaining seed viability. Seeds were packaged in aluminum poly pouches under vacuum, polyethylene bottles, and paper bags containing silica gel and stored under one of two controlled conditions ($15^{\circ}C$, RH 40% or $5^{\circ}C$, RH 30%) or at ambient condition. Seed germination was recorded at 6-month intervals for 10 years. The seeds of both species showed no decline in viability until 6.5 years at 15 or $5^{\circ}C$, irrespective of packaging materials. However, under ambient conditions, the seeds of chili pepper and Chinese cabbage in paper bags lost viability after 4 and 5 years, respectively. By contrast, seeds of both species in vacuum-aluminum poly pouches exhibited a 99% germination rate after 6 years under ambient conditions. Pepper seeds in the vacuum-aluminum poly pouches maintained a 93% germination rate after 10 years in ambient conditions. These results indicated that a special seed storage facility for maintaining viability of chili pepper and Chinese cabbage seed might not be essential and seed testing would not be necessary for 10 years, if chili pepper and Chinese cabbage seeds were packed in ambient/vacuum-aluminum poly pouches or $5^{\circ}C$/vacuum-aluminum poly pouches.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.324-331
• /
• 2009

Peeled whole onions (PWO) were cleaned at various hypochlorous acid (HA) concentration and steeping time and packed in LDPE bag keeping at $10^{\circ}C$ for 12 days and $35^{\circ}C$ for 3 days, in order eventually to examine microbiology, surface color and sensory quality. At the early stage of storage, it was found that total bacterial counts at H-II keeping at $10^{\circ}C$ after 1 minute steeping were $2.60\;{\pm}\;0.18\;log\;CFU/g$, and those after 3 minutes steeping were $2.10\;{\pm}\;0.18\;log\;CFU/g$ which showed less than the control. The total bacterial counts at H-III were detected after 4 days. The total bacterial counts of PWO treated HA increased as steeping time became longer, HA concentration increased, and storage temperature went down. E. coli was not detected at all treatments. It was also found that during the treatment the L-value showed decreasing trend, but the parameter a- and b- value showed increasing trend. But these trends were mitigated as HA concentration increased. The result of sensory quality evaluation for the appearance showed that the sample stored with $10^{\circ}C$ gained higher evaluation than that with $10^{\circ}C$, while the control and H-III gained highest points significantly (p < 0.05) for the sample keeping at $10^{\circ}C$ after 12 days storage. The sensory odor of onion showed similar to that for the appearance, and the 8-day treatments of H-II and H-III showed no significantly difference (p < 0.05). On the basis of the results above, it is likely to be more effective to prolong the period of circulation of PWO if you use HA over 50 ppm for washing PWO and storage at $10^{\circ}C$. This study will contribute to improve safety and quality in circulation of PWO.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.224-229
• /
• 2001

This study was carried out to examine the quality stability of powdered soup using powder from oyster wash water (PSW). To compare the quality stability, powdered soup from oyster hot-water extracts (PSE) was also prepared by mixing hot-water extract powder (15 g), table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g), and onion powder (1.5 g). In preparing PSW, powder from oyster wash water, instead of powder from oyster hot-water extracts, was added and other additives were the same proportion as PSE. The PSW and PSE were packed with laminated film bag (OPP,$20\;{\mu}m$; PE, $20{\mu}m$; paper, $45\;g/m^3$; PE, $20\;{\mu}m$; Al, $7\;{\mu}m$; PE, $20\;{\mu}m$), and then stored at ambient temperature for 12 months. The moisture content, water activity, peroxide value, and fatty acid composition showed little changes during storage of the PSW, The pH, volatile basic nitrogen content, and brown pigment formation increased slightly, while white index decreased slightly during storage of PSW. No significant difference was observed in the changes of food components between PSW and PSE during storage. According to a sensory evaluation, the change in quality of PSW was negligible during 12 months of storage. From the results of the chemical experiment and sensory evaluation, PSW packed with laminated film bag (OPP, $20\;{\mu}m$; PE, $20\;{\mu}m$; paper, $45\;g/{\mu}m$; PE, $20\;{\mu}m$) was revealed to be preserved in good quality during 12 months of storage.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.877-890
• /
• 2005

This study was carried out to determine the effect of different growing stages of winter cereal crops on the quality of silage materials and silages. Silages were made from the silage materials harvested at four growing stages(boot, heading, flowering, and yellow ripe) of barley, rye, oat, and wheat. Approximately 1 kg of silage materials harvested from each growing stage stored in vinyl bags with vacuum packing method and fermented at room temperature for 40 days. As the growing stages progressed, the moisture and crude protein contents of the silage materials decreased, and fiber contents(NDF, ADF and hemicellulose) increased. All the silage materials showed significantly higher contents of water soluble carbohydrate in the boot stages than in the flowering and yellow ripe stages. There was no tendency in acetic acid contents of silage materials cut at different growing stages. The overall pH of silage materials were in the range of 5.91-6.01, and there was no significant difference among growing stages. Buffering capacity of silage materials were in the range of 26.23-29.47meq/100g DM, and showed a tendency to decline as the growing stages proceeded. The moisture and crude protein contents of silages decreased significantly in all species as the growing stages proceeded, and the fiber contents vice versa. As the growing stages proceeded, the pH of the silages tended to increase, and the acetic, butyric, and lactic acid contents tended to decrease. The buffering capacity of silages had a tendency to decrease as the growing stages of winter cereal crops proceeded. Therefore, these features described above should be taken into consideration in order to make silages from winter crops economically.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2015

The aim of this study was to investigate microbiological contamination levels in the manufacturing company of ginseng products (white and red ginseng). Firstly, the contamination level for ginseng and each stage ginseng were 1.8~4.9 log CFU/g (total bacteria), 1.2~3.0 log CFU/g (coliform), 0.8~4.1 log CFU/g (fungi). However, only Bacillus cereus among pathogenic bacteria was detected from a few sample. The contamination of total bacteria tended to decrease as ginseng was being processing. Therefore, that of finished products (white and red ginseng) showed the lowest contamination level among each stage ginseng sample. That of fungi decreased steadily, although the contamination of fungi has tended to increase right after ginseng was steamed. Secondly, the contamination level for working tools and facilities were $1.7{\sim}4.7log\;CFU/cm^2$ (total bacteria), $0.4{\sim}4.0log\;CFU/cm^2$ (coliform), $0.9{\sim}4.2log\;CFU/cm^2$ (fungi). Especially, washing and peeling machines were higher contamination level. Finally, the contamination level of worker who washed and steamed ginseng was higher than worker who shaped, sorted and stored ginseng. Also, Staphylococus aureus was detected at 0.2~0.7 log CFU/hand on some wokers' hands. These results showed proper heating condition (temperature and time) and tidy manufacturing facility are the most important to avoid developing any microbiological problem of Ginseng Products.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.18-28
• /
• 1978

To study about the effect of harvested stage and physical treatment such as wilting or chopping of plant material on the quality of silage, Italian ryegrass(Lolium multiflorum) harvested at pre-headed or heading stage and Seombadi(Dystaenia takesimana Nakai) harvested at pre-flowering stage, were used for the purpose. The materials were treated in four different ways which were a) non-treated, b) one day-wilted, c) chopped with 1 to 2cm length and d) wilted and chopped, and those were ensiled in plastic containers and stored at room temperature for three months. After three months of storage, it was investigated and obtained the following results. 1) Having 6.31 of NFE/CP ratio and low content of crude fiber, Seombadi contained more suitable constituents for silage than Italian ryegrass. 2) Under the non-treated or chopped condition, the loss of NFE was higher, and lower with wilted material. 3) Wilting or chopping improved DM digestibility. 4) Compared with Italian ryegrass harvested at pre-headed stage, the storage amount per unit volume of heading stage-Italian ryegrass and Seombadi were higher 8% and 69% respectively, and wilting and/or chopping increased the storage amount 41 to 134%. 5) The majority of weight loss during storage was observed at 1st week after ensiling, it continued slightly until 4th week. The highest loss in 8th week were 3.76% of nontreated material. 6) One day wilting increased DM content of silage 23 to 131%. Wilting and chopping increased pH and lactic acid improved the quality considerably. 7) The correlation between $NH_3$ and butyric acid, and between lactic acid and DM were r=0.782**, r=0.634** respectively. The regression equation were y=12.853X+4.908 (X=butyric acid), y=0.016X+1.309(X=DM content), respectively. 8. The above results indicate that it is necessary to wilt or chop material to make good quality silage from Italian ryegrass, and such treatment can improve the quality of silage with Seombadi also.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.825-834
• /
• 2003

Chicken thigh from a retail market were used as experimental samples. Some chicken samples of raw state were packaged with PVDC at an aerobic and vacuum condition. The other samples were cooked until core temperature arrived at 70$^{\circ}C$ and then packaged immediately in the same way of raw samples. After samples were irradiated by electron beam at 6 kGy, they were stored in a refrigerator. Identification and quantity of cholesterol oxides were made at 0 and 7 days of storage, respectively. During the early stage of storage, 7$\beta$-hydroxycholesterol, $\alpha$,$\beta$-epoxide, cholestanetriol and 7-ketocholesterol were produced from the raw meat samples, and the production of these chemicals were significantly higher(P〈0.05) from the samples with aerobic packaging than those with vacuum packaging. With storage time, 7$\alpha$-hydroxycholesterol, 6-ketocholesterol and some other chemicals, which were not found during the early stage of storage, were found. Also, the formation of these chemicals were significantly increased(P〈0.05) with storage time. Cholesterol and lipid oxidation products of cooked meat after irradiation and irradiated meat after cooking were significantly increased(P〈0.05) with storage time for all treatments, and vacuum packaging results in showed significantly lower value(P〈0.05) than aerobic packaging. Summarizing the aforementioned results, it was found that the formation of cholesterol and lipid oxides and lipid oxidation was more easily affected by packaging condition than irradiation.

• Journal of Food Hygiene and Safety
• /
• v.33 no.5
• /
• pp.375-382
• /
• 2018

This study was conducted to analyze the microbial community and propionic acid production ability of natural microflora in the rice cakes. Genetic analysis of natural microflora in Jorangyi rice cake was performed to select propionic acid - producing bacteria. Selected propionic acid-producing bacteria were cultivated in TSB (tryptic soy broth) supplemented with glucose, and growth characteristics were analyzed by temperature and production of propionic acid was analyzed by gas chromatography (GC-FID). Linearity, detection limit, quantitative limit, and recovery rate were measured to verify propionic acid assay. A total of 98 microbial strains were detected from microflora of Joraengyi rice cake that grew after expiration of shelf life. Lactobacillus casei group accounted for 50.48% and Lactobacillus buchneri was 29.60%. Propionic acid - producing bacteria were Propionibacterium thoenii, P. cyclohexanicum, Propionibacterium_uc, P. jensenii, and P. freudenreichii. Natural bacteria and Lactobacillus spp. did not produce propionic acid during 14 days but P. cyclohexanicum, P. freudenreichii subsp. Shermanii, P. thoenii and P. jesenii produced $263.47{\mu}g/mL$, $338.90{\mu}g/mL$, $325.43{\mu}g/mL$ and $222.17{\mu}g/mL$ during 4 days and 2,462.02 and 2,904.78, 2,220.64, $3,519.17{\mu}g/mL$ during 14 days. As a result of this study, it was affirmed that the natural microflora of Joraengyi rice cake during storage can produce propionic acid from natural sources even if a high concentration of propionic acid is not intentionally added. Because of characteristics of rice cake composed of starch and glucose. This study will be used as a recognition criterion to detect natural preservatives such as propionic acid in starchy foods such as rice cakes and as reference standard safety management data.

• Korean Journal of Food Science and Technology
• /
• v.3 no.3
• /
• pp.178-184
• /
• 1971

Samples of refined soybean oil were irradiated with lights from a 20-watt incandescent tungsten lamp, a 20-watt fluorescent daylight type lamp, a 20-watt low-pressure mercury vapor germicidal lamp, and direct sunlight for an experimental period of 147 days. Some samples were stored in a dark room throughout the period as a control. The peroxide values of all samples were measured every week. The induction period of the samples was arbitrarily taken as the time required for the samples to reach a peroxide value of 15. The induction period of the control was estimated at 198 days. Those of the samples irradiated with the incandescent light, the fluorescent light, the ultraviolet light, and the sunlight were estimated at 196, 119, 52 and 6 days, respectively. The sunlight showed by far the strongest prooxidant activity whereas the incandescent light showed the weakest but distinct prooxidant activity. The small temperature differences observed among the various samples throughout the experimental period did not seem to affect the oxidation rates of the irradiated samples in any significant way.