• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1331-1338
• /
• 2010

최근 심야 전기 수요의 증가로 인해 양수 발전 설비의 이용률이 감소하고 있다. 이러한 이용률 감소는 양수 발전 설비를 운용/정비하는 측면에서 경제성을 향상시킬 필요성을 증가시킨다. 양수 발전 설비의 경제성 향상을 위해서는 예방점검 주기, 특히 분해점검 주기를 연장하여야 한다. 그러나, 무조건적인 연장은 불충분한 정비에 기인하는 예기치 못하는 파손을 발생시킬 수 있기 때문에 수행될 수 없다. 따라서 본 연구에서는 양수 발전 설비의 특성을 고려하고 기존 신뢰도 연구들을 검토하여 신뢰도와 경제성을 모두 고려하는 예방점검 주기 최적화 방법론을 제안한다. 최종적으로 실제 양수 발전 설비에 제안된 방법론을 국내 양수발전소에 적용하여 연장된 최적화 분해 점검 주기를 도출한다.

• 신재생에너지
• /
• 제10권3호
• /
• pp.47-54
• /
• 2014

Recently, BESS is considered as one of essential countermeasure for demand side management. However, an economic evaluation is critical issue for the introduction of power system because the cost of BESS is very high in present stage. Therefor, this paper presents economic evaluation method for customer use case by considering peak shaving function based on the real time price. From the case study on the model power system and educational customer, it is confirmed that the proposed method is a practical tool for the economic analysis of BESS. and analytical approach for the reliability assessment in radially operated distribution systems. The approach can estimate the expected reliability performance of distribution systems by a direct assessment of the configuration of the systems using the reliability indexes such as NDP (Non-Delivery Power) and NDE (Non-Delivery Energy). The indexes can only consider the number and configuration of the load, but can not consider the characteristics of the load which is the one of the most important factor in the investment cost for the distribution systems. Therefore, this paper presents the new performance indexes for the investment of the distribution facilities considering both the expected interruption cost for the load section and the operation characteristics of Energy Storage System. The results from a case study show that the proposed methods can be a practical tool for the reliability management in distribution systems including Energy Storage System.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.267-274
• /
• 2015

It is necessary to both analyze root-cause of non-conformance of effective illumination time to the specification, and estimate the storage lifetime for 81 mm illuminating projectile stockpiled over 10 years. In this paper, aging mechanism of magnesium flare material due to long-term storage was supposed, and two-stage tests, pre-test and main test based on accelerated degradation tests were performed. Field storage environment of moistureproof was set up, and illumination times in the accelerated degradation tests for temperatures 60 and $70^{\circ}C$ were measured. Then, storage reliability of the projectile was estimated through analyzing the measured data and applying distribution-based degradation models to the data. The $B_{10}$ life by which 10 % of a population of the projectiles will have failed at storage temperature of $25^{\circ}C$ was estimated about 7 years.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.431-437
• /
• 2015

Recently, a miniaturized measurement cell of effective thermal conductivity was developed to evaulate the heat transfer characteristics of hydrogen stroage material in the initial step of its development. In this work, the realiablity issues which can occur from this miniaturization of measurement cell were studied in detail by both experiments and numerical simulation of heat transfer. $LaNi_5$ as a reference was used for the reliability evaluation of the miniaturized measurement cell. Numerical simulations of heat transfer for this measurement system were verified through comparison with the experimental data. Under these reliablity studies, we discuss how to overcome the inherent drawbacks of this miniaturized system in order to achieve the high reliability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권12호
• /
• pp.4725-4747
• /
• 2020

Software defined networking (SDN) is considered to be one of the most promising paradigms in the future. To solve the scalability and performance problem that a single and centralized controller suffers from, the distributed multi-controller architecture is adopted, thus forms multi-domain SDN. In a multi-domain SDN network, it is of great importance to ensure a reliable control plane. In this paper, we focus on the reliability problem of multi-domain SDN against controller failure from perspectives of backup controller deployment and controller replication. We firstly propose a placement algorithm for backup controllers, which considers both the reliability and the cost factors. Then a controller replication mechanism based on shared data storage is proposed to solve the inconsistency between the active and standby controllers. We also propose a shared data storage layout method that considers both reliability and performance. Besides, a fault recovery and repair process is designed based on the controller backup and shared data storage mechanism. Simulations show that our approach can recover and repair controller failure. Evaluation results also show that the proposed backup controller placement approach is more effective than other methods.

• 한국국방경영분석학회지
• /
• 제32권2호
• /
• pp.92-113
• /
• 2006

무기체계는 최근 고도의 신기술과 막대한 비용이 투자되어 첨단화, 정밀화, 장사정화, 은밀화, 복합 기능화의 특징을 가진 고비용 무기체계로 변화하고 있다. 이에 따라 유도무기체계의 경우도 경제적인 운용과 사용자의 안전성을 보장하는 측면에서 고도의 신뢰성이 보장되어야 한다. 따라서 유도무기 체계를 개발하고 생산하는 단계에서의 신뢰도 평가뿐만 아니라 주어진 저장 환경조건이나 운용환경에서의 일정한 저장 신뢰도의 유지를 위한 기준이 제시 되고 이를 유지하기 위한 최적화된 검사주기가 필요하다고 할 수 있다. 본 연구는 현재 해군에서 운용중인 대함 유도탄(Harpoon Block 1)을 대상으로 검사주기 간 고장건수 및 정비현황을 기초로 수학적 기법과 신뢰도 분석 S/W를 활용하여 저장고장률과 MTBF를 도출하고 이를 바탕으로 체계 운용유지를 위한 최적 검사주기를 결정하여 향후 대함 유도무기체계 신뢰도 예측 및 평가를 통한 검사주기 개선방안을 제시하였다.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.1-7
• /
• 2015

This paper proposes probabilistic reliability evaluation model of power system considering Wind Turbine Generator(WTG) integrated with Energy Storage System(ESS). Monte carlo sample state duration simulation method is used for the evaluation. Because the power output from WTG units usually fluctuates randomly, the power cannot be counted on to continuously satisfy the system load. Although the power output at any time is not controllable, the power output can be utilized by ESS. The ESS may make to smooth the fluctuation of the WTG power output. The detail process of power system reliability evaluation considering ESS cooperated WTG is presented using case study of Jeju island power system in the paper.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.208-215
• /
• 2016

Purpose: ASRP for the domestic development guided missiles requires not only for the reliability evaluation of the products in storage but also for the life cycle management of the products including development prototypes and initial production items. Methods: For this purpose, it should be performed to build a performance database before and after the accelerated aging test with shelf life items including development prototypes and initial production items, based on which the lifetime prediction should also be carried out. In addition, HILS must be applied for the acceptance test with the initial and follow-up production items, and also for ASRP for the long-term storage products in order to secure systematic quality assurance. Results: The results for the life cycle reliability Improving of domestic development of guided missiles are DB building of prescription Item performance, active application of HILS, Management associated with guided missiles life cycle and to Secure technology data about the introduction of foreign guided missiles. Conclusion: Furthermore, it is demanded that DTaQ, the managing agency of ASRP, actively take part in the process to maintain reliability engagement consistency over the life cycle of guided missiles.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1295-1302
• /
• 2016

In this paper, a black box, which is provided the reliability and user safety of home battery energy storage system connected with solar energy generation, is developed. In the developed scheme, a status and diagnosis data of battery management system, power conditioning system, solar energy generation and grid is measured. This status and diagnosis data is stored and displayed in the developed black box. In addition, this status and diagnosis data is stored and displayed in a monitoring system and a smart phone of user. A performance evaluation of the developed black box is carried out using emulator of home battery energy storage system connected with solar energy generation. Consequently, the developed black box is proved its superiority of the reliability and user safety.