• Title/Summary/Keyword: storage containers

Search Result 164, Processing Time 0.026 seconds

A Comparative Analysis: Various Storage Rules in Container Yards and Their Performances

  • Ma, Yaowen;Kim, Kap-Hwan
    • Industrial Engineering and Management Systems
    • /
    • v.11 no.3
    • /
    • pp.276-287
    • /
    • 2012
  • Determining storage locations of containers is an important issue for efficient operation of container terminals. This study assumes a storage yard with a horizontal layout in which blocks are laid out in parallel to the quay and trucks enter at the side of a block to deliver (receive) a container to (from) the yard crane. Various storage rules for determining storage locations of containers are introduced. Simulation studies are conducted for evaluating various rules. The following guidelines are derived from the result of our simulation study: when designing a block, consider a block configuration in which the longest gantry and the longest trolley travel times of rail-mounted gantry cranes (RMGCs) are similar; do not restrict the types of containers that can be stored in a storage area; if different roles are to be assigned to different storage areas, one possible way is to divide a bay into two areas so that some rows in the bay are allocated to inbound containers while the other rows in the same bay are allocated to outbound containers; reserve the space in bay unit for a high productivity of RMGCs but reserve the space in stack unit when the storage space is not enough; when the storage space is not sufficient, allocate storage location in a way of starting from the end and ending at the middle of a block; for reducing the travel distance of internal trucks, provide a higher priority to a block nearer to the berthing position of the corresponding vessel.

Changes Quality Characteristics of Kimchi by Storage Containers (저장용기에 따른 김치의 품질 특성 변화)

  • 임재운;문주수;김현덕;나두종;손종연
    • The Korean Journal of Food And Nutrition
    • /
    • v.17 no.1
    • /
    • pp.80-85
    • /
    • 2004
  • This study was performed to provide basic quality characteristics data of Kimchi by storage containers that will be applied for Kimchi storage container development of new material. In all storage containers, pH was decreased with increased storage days, while acidity was increased with increased storage days, The changes of pH and acidity by storage containers were alumina < stainless < bio < plastic. Salt content was same to all containers. In all storage containers, reducing sugars of Kimchi at first were 22.65${\pm}$0.04$\^$a/ mg/mL. But as these of alumina, stainless, bio and plastic at storage after 31 days were 11.18${\pm}$0.15$\^$a/ mg/mL, 5.39${\pm}$0.02$\^$b/, 3.74${\pm}$0.10$\^$c/, and 3.14${\pm}$0.02$\^$d/ mg/mL, respectively. The hardness, cohesiveness and gumminess of Kimchi by storage containers decreased with increased storage days. And the changes ratio of these were alumina < stainless < bio < plastic. The desirable organoleptic characteristic such as sourness, fresh cabbage taste and firmness were long time maintained at alumina container A significant evidence was detected that the alumina container showed less quality change than that of bio, stainless and plastic containers as storage days increased.

Changes in Microbial Properties and Sensory Characteristics during the Storage of Kimchi in Containers with Native Plant Extracts (자생식물 추출물을 첨가하여 개발된 저장용기의 김치 저장 중 미생물과 관능적 특성의 변화)

  • Woo, Nariyah;Lee, Hye-Ran;Ko, Seonghee
    • The Journal of the Korea Contents Association
    • /
    • v.22 no.1
    • /
    • pp.646-655
    • /
    • 2022
  • This study was conducted to investigate the quality characteristics of Kimchi during fermentation and storage according to containers with native plant extract. The containers used in the experiment were antimicrobial polypropylene containers(KAPP) developed with the addition of native plant extracts, and it was tested by comparing the microbial changes and sensory characteristics of the existing commercial containers, such as polypropylene containers(KPP), stainless steel containers(KST), and porcelain containers(KPC). Change in total microbial cell were similar for each container. Coliform maintained the lowest level from 15 days after storage to 50 days. Leuconostoc spp. and Lactobacillus spp. showed a rapid increase in all four storage containers until the 15th day of storage and then decreased. The KAPP container maintained its highest level. The sensory evaluation was carried out on Kimchi optimal condition(storage 40 days). The sensory scores of KAPP were generally higher than those of other experimental samples in characteristics of appearance, odor, taste and overall preference. As a result, KAPP container has an excellent antibacterial effect as compared with the three commercially available storage containers, is effective for fermentation of lactic acid.

Dynamic Analysis of Rectangular Liquid Storage Containers Considering Fluid-Structure Interaction effects (유체-구조물 상호작용 효과를 고려한 직사각형 단면의 수조구조물의 동적 해석)

  • 박장호;권기준
    • Journal of the Korean Society of Safety
    • /
    • v.15 no.3
    • /
    • pp.96-101
    • /
    • 2000
  • The effects of internal fluid motion have to be considered in the analysis of liquid storage containers. Therefore this thesis developed a three-dimensional boundary element-finite element method for the analysis of rectangular liquid storage containers. The irrotational motion of inviscid and incompressible ideal fluid is modeled by using boundary elements and the motion of structure by finite elements. Coupling is performed by using compatibility and equilibrium conditions along the interface. Dynamic response characteristics of rectangular liquid storage containers such as sloshing motion, hydrodynamic pressure, displacement by fluid-structure interaction are investigated.

  • PDF

Improvement of Shelf-life and Quality in Fresh-Cut Tomato Slices:

  • Hong Ji Heun
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2004.10a
    • /
    • pp.67-72
    • /
    • 2004
  • Quality of fresh-cut tomato slices was compared during cold storage under various modified atmosphere packaging conditions. Chilling injury of slices in containers sealed with Film A was higher than with Film B; these films had oxygen transmission rates of 87.4 and 60.0 ml $h^{-1}\;m^{-2}\;atm^{-1}$ at $5^{\circ}C\;and\;99\%$ RH, respectively. While slices in containers with an initial atmospheric composition of air, $4\%\;CO_2+1\;or\;20\%\;O_2,\;8\%\;CO_2+1\;or\;20\%\;O_2,\;or\;12\%\;CO_2+20\%\;O_2$ showed fungal growth, slices in containers with $12\%\;CO_2+1\%\;O_2$ did not. Low ethylene in containers enhanced chilling injury. Modified atmosphere packaging provided good quality tomato slices with a shelf-life of 2 weeks or more at $5^{\circ}C$. Experiments were conducted to compare changes in quality of slices of red tomato (Lycopersicon esculentum Mill. 'Sunbeam') fruit from plants grown using black polyethylene or hairy vetch mulches under various foliar disease management systems including: no fungicide applications (NF), a disease forecasting model (Tom-Cast), and weekly fungicide applications (WF), during storage at $5^{\circ}C$ under a modified atmosphere. Slices were analyzed for firmness, soluble solids content (SSC), titratable acidity (TA), pH, electrolyte leakage, fungi, yeasts, and chilling injury. With both NF and Tom-Cast fungicide treatments, slices from tomato fruit grown with hairy vetch (Vicia villosa Roth) mulch were firmer than those from tomato fruit grown with black polyethylene mulch after 12 days storage. Ethylene production of slices from fruit grown using hairy vetch mulch under Tom-Cast was about 1.5- and 5-fold higher than that of slices from WF and NF fungicide treatments after 12 days, respectively. The percentage of water-soaked areas (chilling injury) for slices from tomato fruit grown using black polyethylene mulch under NF was over 7-fold that of slices from tomato fruit grown using hairy vetch under Tom-Cast. When stored at $20^{\circ}C$, slices from light-red tomato fruit grown with black polyethylene or hairy vetch mulches both showed a rapid increase in electrolyte leakage beginning 6 hours after slicing. However, slices from tomato fruit grown using the hairy vetch mulch tended to have lower electrolyte leakage than those grown with black polyethylene mulch. These results suggest that tomato fruit from plants grown using hairy vetch mulch may be more suitable for fresh-cut slices than those grown using black polyethylene mulch. Also, use of the disease forecasting model Tom-Cast, which can result in lower fungicide application than is currently used commercially, resulted in high quality fruit for fresh-cut processing. Experiments were conducted to determine if ethylene influences chilling injury, as measured by percentage of slices exhibiting water-soaked areas in fresh-cut tomato slices of 'Mountain Pride' and 'Sunbeam' tomato (Lycopersicon esculentum Mill.). Ethylene concentration in containers without ventilation significantly increased during storage at $5^{\circ}C$, whereas little or no accumulation of ethylene occurred in containers with one or six perforations. Chilling injury was greatest for slices in containers with six perforations, compared to slices in containers with one perforation, and was over 13-fold greater than that of slices in control containers with no perforations. An experiment was also performed to investigate the effectiveness of including an ethylene absorbent pad in containers on subsequent ethylene accumulation and chilling injury. While ethylene in the no-pad controls increased continually during storage of both 'Mountain Pride' and 'Sunbeam' tomatoes at $5^{\circ}C$ under modified atmosphere conditions, no increase in accumulation of ethylene was observed in containers containing ethylene absorbent pads throughout storage. The ethylene absorbent pad treatment resulted in a significantly higher percentage of chilling injury compared with the no-pad control. In studies aimed at inhibiting ethylene production using AVG during storage of slices, the concentration of ethylene in control containers (no AVG) remained at elevated levels throughout storage, compared to containers with slices treated with AVG. Chilling injury in slices treated with AVG was 5-fold greater than that of controls. Further, we tested the effect of ethylene pretreatment of slices on subsequent slice shelf-life and quality. In slices treated with ethylene (0, 0.1, 1, or $10\;{mu}L\;L^{-1}$) immediately after slicing, ethylene production in non-treated controls was greater than that of all other ethylene pre-treatments. However, pretreatment of slices 3 days after slicing resulted in a different pattern of ethylene production during storage. Ihe rate of ethylene production by slices treated with 1 L $L^{-1}$ ethylene 3 days after slicing was greater during storage than any of the other ethylene treatments. With slices pre-treated with ethylene, both immediately and 3 days after slicing, the rate of ethylene production tended to show an negative correlation with chilling injury. Chemical name used: 1-aminoethoxyvinylglycine (AVG).

  • PDF

Thermal analysis of certain accident conditions of dry spent nuclear fuel storage

  • Alyokhina, Svitlana
    • Nuclear Engineering and Technology
    • /
    • v.50 no.5
    • /
    • pp.717-723
    • /
    • 2018
  • Thermal analysis of accident conditions is an important problem during safety assessment of the dry spent nuclear fuel storage facilities. Thermal aspects of accident conditions with channel blockage of ventilated storage containers are considered in this article. Analysis of flow structure inside ventilated containers is carried out by numerical simulation. The main mechanisms of heat and mass transfer, which take part in spent nuclear fuel cooling, were detected. Classification of accidents on the basis of their influence on the maximum temperatures inside storage casks is proposed.

Locating export containers in order to minimize the number of rehandles (재취급을 최소화하기 위한 수출컨테이너 장치위치 결정법)

  • 김갑환;박영만
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1996.04a
    • /
    • pp.473-476
    • /
    • 1996
  • In order to reduce the number of rehandles during the loading operation of export containers in port container terminals, the storage location of each arriving container should be determined considering of its weight. We formulate the problem by a dynamic programming model to get the optimal storage location.

  • PDF

Pricing the Storage of Inbound Containers with a Discrete Probability Distribution of Retrieval Times

  • Kim, Ki-Young;Kim, Kap-Hwan
    • Industrial Engineering and Management Systems
    • /
    • v.9 no.2
    • /
    • pp.165-177
    • /
    • 2010
  • This paper discusses a method for pricing the storage of inbound containers in a container yard. The pricing structure is characterized by a free-time-limit and a storage price for the storage time that extends beyond the free-time-limit. A cost model is developed from the viewpoint of a public terminal operator as well as a private terminal operator. Unlike a previous study on this issue, this study assumes that the retrieval times follow a discrete probability distribution, which is more realistic than the previous study. A solution procedure is suggested and illustrated by using numerical examples.

Quality Changes of Pine Nuts(Pinus koraiensis) Stored in Airtight Container and Zipper Bag (밀폐용기와 지퍼백에 저장한 잣(Pinus koraiensis)의 품질변화 연구)

  • Kim, Seong-Soo;Park, Ji-Young;Park, Su-Il;Lee, Youn-Suk;Kim, Jai-Neung
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.14 no.2
    • /
    • pp.57-63
    • /
    • 2008
  • The effects of airtight containers and zipper bags on the freshness extension of pine nuts (Pinus koraiensis) were studied at 4 and $25^{\circ}C$. Changes in total microbial growth, 2-thiobarbituric acid(TBA), color, and sensory quality were evaluated during storage. Total bacterial counts of the samples continuously increased over 28 days for airtight containers and 56 days for zipper bags, and then decreased at 70 days because the lack of air could affect the inhibition of the aerobic microbial growth. However no significant differences were observed between airtight containers and zipper bags. TBA values continuously increased with storage time, but there were no significant differences between the airtight containers and zipper bags during storage. Color changes and sensory evaluation analyses showed that the data revealed similar results for both packaging systems over the storage time. Therefore, it has been concluded that airtight containers and zipper bags could be used as a good packaging system to extend the shelf life of pine nuts by controlling the microbial growth, but the packaging systems of the airtight containers and the zipper bags was not significantly affect the quality parameters for 2-thiobarbituric acid(TBA), color, and sensory quality.

  • PDF

An Approach to the Localization of Technology for a Transport and Storage Container for Very Low-Level Radioactive Liquid Waste

  • Shin, Seung Hun;Choi, Woo Nyun;Yoon, Seungbin;Lee, Un Jang;Park, Hye Min;Kim, Hee Reyoung
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.20 no.1
    • /
    • pp.127-131
    • /
    • 2022
  • The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.