• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.63-69
• /
• 2001

Holographic transmission gratings were performed by an Ar-laser( ${\lambda}$=514nm) intensity, the ratio fo LC contents to the surfactant. The addition of the surfactant to the LC and pre-polymer systems causes the droplet to maintain the ideal size at the high fraction(over 40wt%) of the LC contents that induce the films to be fabricated with high diffraction efficiency than that of no surfactant series. The image of these films was examined using a charge coupled device (CCD). We also studied the angular selectivity plots which support the important role in the multiplexer channel (MUX). Eventually, we showed the reconstructive optical image recorded in this transmission mode of HPDLCs.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.56-58
• /
• 2014

본 논문에서는 압축 도메인에서 고속으로 움직임을 검출하고 해당 구간을 저장 하는 알고리즘을 제안한다. 제안하는 알고리즘은 H.264/AVC 기반의 압축 비트스트림에서 움직임 벡터와 참조프레임을 이용하여 움직임이 있는 프레임을 검출하고 움직임 유무에 따라 GOP 단위로 저장하는 과정을 수행한다. 압축도메인에서 움직임 검출과 구간 저장을 수행함으로써 복잡도를 낮추고 비디오 저장을 위한 공간을 절약해 실시간 다채널 영상 처리에 최적화 된 성능을 제공한다. 제안하는 움직임 검출 및 저장 시스템은 single thread 환경에서 실시간으로 평균 2957 프레임을 처리 가능하며, Multi thread의 경우 30 fps 영상 98개 채널을 실시간으로 처리 가능하다.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3150-3152
• /
• 1999

The efficient representation and encoding of signals with limited resources, e.g., finite storage capacity and restricted transmission bandwidth, is a fundamental problem in technical information processing systems. Typically under realistic circumstances, the encoding and communication of message has to deal with different sources of noise and disturbances. In this paper, I propose a unifying approach to data compression by robust vector quantization, which explicitly deals with channel noise, and random elimination of prototypes. The resulting algorithm is able to limit the detrimental effect of noise in a very general communication scenario. In this paper, based on the robust vector quantization I have an experiment about speech coding.

• Journal of Korea Multimedia Society
• /
• v.21 no.11
• /
• pp.1237-1243
• /
• 2018

In the HDTV video codec, conventional the padding method of DEPA(DTV essential padding area) region is aimed at minimizing the redundant information to be transmitted. This article propose a method to transmit additional data by using DEPA region. The proposed method is effective for the channel and storage because it can reduce the amount of bits while preventing deterioration of image quality by inserting binary gray image blocks into the DEPA region. Additionally this algorithm can be used in various fields because it conforms to the standards of MPEG-2, ATSC, and DVB encoders.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.69-79
• /
• 1997

The purpose of this study is to acquire essential data to reduce the amount of woody debris resulted from the debris flow. This research examined topographic characteristics of the channelbed affecting generation, movement and storage of woody debris and woody characteristics related to number, sizes, shapes, decay, storage direction to mountainous stream. 1. The number of woody debris had a tendency to increase in proportion to stream width, but it was hardly affected by longitudinal gradient of stream. Especially, the greater amount of woody debris was stored at wide section of the stream with compound channel, and it was found in deposits of channelbed rather than in the present channel. 2. Total woody debris over 10cm in diameter and over 2m in length was 402 units and storage number was 35.3 units per 100m of stream. Average diameter of breast height and length were 14cm and 4m, respectively. The woody debris appeared shorter in length and greater in diameter at down-stream than up-stream. 3. Since woody debris met sediments and bed-materials of great roughness in moving, the greater amount of woody debris without root was found in up-stream and down-stream, but deformed woody debris was discovered in upper stream. Decay of woody debris was more severe in down-stream and woody debris on rotting process was found down-stream. 4. Storage direction of woody debris was mainly parallel to center line of stream, and rate of parallel and perpendicularity was 276 and 126 units, respectively. But, as woody debris storing to the perpendicular direction was unstable, the traveling debris could easily be stored. Therefore, some counterplan was required to prevent the traveling woody debris. 5. Tree species of woody debris was mainly larch, which occupied about two third of total woody debris(256 units). The woody debris of larch is easy to move due to hitting of channelbed materials or lower channelbed fluctuation because the lower part of larch is weaker than its upper part. Therefore, the section of the tree species planting in the riparian vegetation needs much more carefulness.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.156-162
• /
• 2005

Particularly in research related to seawater intrusion the change of fluid electrical conductivity is one of major concerns, and effective monitoring can help to optimize a water pumping performance in coastal areas. Special considerations should be given to the mounting of sensors at proper depth during the monitoring design since the vertical distribution of fluid electrical conductivity is sensitive to the characteristics of seawater intrusion zone. This tells us the multi-channel electrical conductivity monitoring is of paramount consequence. It, however, is a rare event when this approach becomes routinely available in that commonly used commercial stand-alone type sensors are very expensive and inadequate for a long term monitoring of electrical conductivity or water level due to their restricted storage and difficulty of real-time control. For this reason, we have developed a real-time monitoring system that could meet these requirements. This system is user friendly, cost-effective, and easy to control measurement parameters - sampling interval, acquisition range, and others. And this devised system has been utilized for the electrical conductivity monitoring in boreholes, Yeonggwang-gun, Korea. Monitoring has been consecutively executed for 24 hours, and the responses of electrical conductivity at some channels have been regularly increased or decreased while pumping up water. It, with well logging data implemented before/after pumping water, verifies that electrical conductivity changes in the specified depths originate from fluid movements through sand layer or permeable fractured rock. Eventually, the multi-channel electrical conductivity monitoring system makes an effective key to secure groundwater resources in coastal areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1827-1840
• /
• 2001

In digital data transmission/storage systems, the compensation for channel distortion is conducted normally using a training sequence that is known a priori to both the sender and receiver. The use of the training sequences results in inefficient utilization of channel bandwidth. Sometimes, it is also impossible to send training sequences such as in the burst-mode communication. As such, a great deal of attention has been given to the approach requiring no training sequences, which has been called the blind equalization technique. On the other hand, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed transmission and high-density recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCRs and digital versatile recordable disks and so on. This paper is concerned with blind adaptive equalization of partial response channels whose transfer function zeros are located on the unit circle, thereby causing some problems in performance. Specifically we study how the problems of blind channel equalization associated with the PR channels can be improved. In doing so, we first discuss the existing methods and then propose new structures for blind PR channel equalization. Our structures have been extensively tested by computer simulation and found out to be encouraging in performance. The results seem very promising as well in terms of the implementation complexity compared to the previous approach reported in literature.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.633-638
• /
• 2017

The amount of radioactive waste has been rapidly increased with development of radiation treatment in medical field. Recently, it has been a common practice to use I-131 for thyroid cancer, F-18 for PET/CT and Tc-99m for diagnosis of nuclear medicine. All the wastes concerned have been disposed of by means of the self-disposal method, for example incineration, after storage enough to decay less than clearance level. IAEA proposed criteria for clearance level of waste which depends on the individual ($10{\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, specific radioactivity of radioactive waste contaminated with Re-186 was measured to confirm whether it meets the clearance level. Re-186 has long half life of 3.8 days relatively and emits beta and gamma radiation, therefore it can be applied in treatment and imaging purposes. The specific radioactivity of contaminated gloves weared by radiation workers was measured by MCA(Multi-channel Analyzer) which was calibrated by reference materials in accordance with the measuring procedure. As a result, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and physical half-life was considered, and it is showed that the physical half-life is longer than induced half-life. Therefore, the storage period of radioactive waste for self-disposal may be curtailed in case of application of induced half-life. The result of this study will be proposed as ISO standard.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.1
• /
• pp.41-55
• /
• 2015

Monitoring of $CO_2$ release through the ground surface is essential to confirm the safety of carbon storage projects. We conducted a feasibility study of the multi-channel surface-soil $CO_2$-concentration monitoring (SCM) system as a soil $CO_2$ monitoring tool with a small scale injection test. The background concentrations showed the distinct diurnal variation. The negative relation of $CO_2$ with temperature and the low $CO_2$ concentrations during the day imply that surface-soil $CO_2$ depends on photosynthesis and respiration. After 4.2 kg of $CO_2$ injection (1 m depth for 29 minutes), surface-soil $CO_2$ concentrations increased in the all five chambers, which were located less than 2.8 m of distance from each other. The $CO_2$ concentrations seem to be recovered to the background around 4 hours after the injection ended. To determine the leakage, the data from Chamber 2 and 5 with low increase rates were used for statistical analyses. Coefficient of variation for 30 minutes ($CV_{30min}$.) is efficient to determine a leakage signal, with reflecting the fast change in $CO_2$ concentrations. Consequently, SCM and $CV_{30min}$ could be applied for an efficient monitoring tool to detect $CO_2$ release through the ground surface. Also, this study provides ideas for establishing action steps after leakage detection.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.199-206
• /
• 2013

Recently, the diverse needs of the drivers for in-vehicle infotainment systems are increasing rapidly. As a result, the infotainment systems are equipped with more convenient and human-friendly high-tech features. In this paper, we designed and implemented in-vehicle multimedia infotainment system based on embedded system that was applied various multimedia to in-vehicles. The proposed system can support independent display on each screen for the multi-channel multimedia source based on one processor(1 CPU). Therefore, our system can be reduced costs compared to other systems. This system not only displays the video and audio data in storage devices but also displays CAM, T-DMB, and DVB-T multimedia contents which are supplied in real-time services. Also, our system could multi-screen displays multimedia data in smart phone using Wi-Fi. We expect that in-vehicle infotainment systems like AVN(Audio video navigation) and RSE(Rear Seat Entertainment) could be used in various applications and reduced costs.