• 제목/요약/키워드: stone weirs

검색결과 5건 처리시간 0.023초

Stone weirs in Penghu and adaption to tourism development

  • Yu, Shyi-Liang;Chu, Ying-Chien;Tsai, Chia-Wen
    • Journal of Ecology and Environment
    • /
    • 제38권2호
    • /
    • pp.257-262
    • /
    • 2015
  • The ancient fishing methods include stone fish weir, beach seine and baulk net, but the fish catches of the stone fish weir is the most abundant. The stone fish weirs not only constitute important landscape, but also are representative of the fishery culture in Penghu, because they are fishing ground built by ancient people to take advantage of natural environment and resources. The objectives of this study is to understand the relevance of stone fish weirs in Penghu and to preserve biological diversity, as well as the value of stone fish weirs in Penghu fishery culture, and further make suggestions on the stone fish weirs. According to the present study, the marine species around the stone fish weirs tend to be diversifying, and in the future the region's economy can be revitalized by sightseeing, which may promote the ecotourism, and also volunteer tourism. In the future, stone fish weirs must be promoted as a sightseeing destination. Also, by taking into consideration the experience of the Jibei stone weir protection team, the local communities of Penghu can have their own protection team to revitalize the stone fish weirs for sustainable operation and management.

자연형 소하천 정비에 따른 하상변동 특성 (Riverbed Change Special Quality by Nature Style Small Stream Improvement)

  • 정해원;정재훈;윤정환;박승기
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2005년도 학술발표논문집
    • /
    • pp.330-335
    • /
    • 2005
  • This study was performed for the analysis of the variation characteristics on riverbed according to the arrangement of stream. It was monitored of the variation progress of riverbed dependent on the elapsed time after the arrangement and It was studied that the hydraulic adjustment of the riverbed caused by the variation of the riverbed. The large amount of deposit just after the construction in which the riverbed was arranged to natural form was come from the reduction of flow rate by the installed artificialities such as weirs and stone weirs and by the stones or the concrete blocks attached to the stream sides of riverbanks. This phenomenon was well consistent with the usual characteristics that the accumulation is induced on upper stream of hydraulic artificialities and the erosion is induced on down stream of hydraulic artificialities. The large reduction of the deposit 1 year later after the construction showed that the riverbed eroded considerably because of the recovery of flow amount and the rise of flow rate.

  • PDF

전통어로방식-어살의 전승과 더 좋은 죽방렴 멸치의 생산: 남해안 죽방렴의 구조 변화와 어업방식을 중심으로 (Passing Down Traditional Fishing Methods Using Fish Weirs and the Production of Better Bamboo Weir Anchovies: Focusing on Structural Changes to Bamboo Weirs and Fishing Methods on the Southern Coast)

  • 전경호
    • 헤리티지:역사와 과학
    • /
    • 제55권3호
    • /
    • pp.132-150
    • /
    • 2022
  • 국가무형문화재로 지정된 어살은 전통어로방식의 하나로 우리나라 연안어업을 대표하는 어구였다. 그런데 1970년대 이후 연근해 어선어업이 발달하면서 어살을 포함한 전통어로방식은 상대적으로 쇠퇴하기 시작하였다. 현재 어살은 돌살과 죽방렴 형태로 전승되고 있는데, 경상남도 남해군과 사천시에서는 죽방렴을 이용하여 멸치를 어획하고 있다. 죽방렴의 기본 형태는 물고기가 모이는 공간인 '발통'과, 조류에 의해 물고기가 발통 안으로 들어가게 도움을 주는 V자 혹은 U자 형태의 '할가지'로 구성되어 있다. 어업방식은 밀물 때 연안으로 들어왔다가 썰물 때 조류를 따라 발통 안에 갇힌 물고기를 그물이나 뜰채로 어획한다. 이 논문에서는 남해와 사천 지역의 죽방렴 구조와 어업방식의 비교분석을 통해 전통어로방식의 전승 과정을 알아보았다. 먼저 현재의 죽방렴 구조가 완성되는 역사적 과정을 분석했다. 과거 방렴과 어살의 공존 속에서 두 어구의 특성을 조합한 죽방렴이라는 어구가 지족해협과 삼천포해협을 중심으로 완성된 것으로 보인다. 다음으로는 물고기가 모이는 공간(발통)이 원형이거나 방형으로 만들어진 두 가지 형태의 죽방렴의 구조와 어업방식에 대해서 살펴보았다. 이를 통해 자연환경에 순응하고, 획득 가능한 자원(재료)을 적극 활용하면서 죽방렴 어업이라는 전통 어로기술을 변화시켜 적합한 기술로 발전시킨 어민들의 모습을 살펴보았다. 마지막으로는 죽방렴 멸치에 부여된 새로운 가치를 분석하였다. 더 좋은 멸치라는 죽방렴 멸치의 새로운 가치는 다른 멸치어업에 비해 소량 생산되는 죽방렴 멸치어업의 명맥을 유지시켜 주는 하나의 기제로 작동하고 있다. 이처럼 죽방렴 어업은 전통어로방식을 전승하고 있다는 역사성과 함께 다른 어로를 통해서 생산한 멸치보다 더 좋은 멸치라는 차별성까지 획득하면서 계승되고 있다.

Abrasive Water-Jet이 가공물의 형상에 미치는 영향 (Influence of Abrasive Water-Jet on Workpiece Geometry)

  • 장현석;하만경;류인일;곽재섭;이상진;이기백
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2002년도 춘계학술대회 논문집
    • /
    • pp.585-590
    • /
    • 2002
  • Abrasive water-jet(AWJ) machining is a new cutting technology. The AWJ can cut various materials touch as metal, glass and stone. However, the AWJ machining makes troubles including kerf, rounding and side taper. In this study, we investigated the correlation between parameters of abrasive water-jet machining arid cutting characteristics. The machining parameter were the material thickness and the traverse speed. The experiment was conducted to cut the stainless steel(STS41) and the mild steel(SS41) specimens. The results of the experiment weirs presented as the relation between cutting conditions and trouble of a dimension error, a conner error, an uncut width and a kerf.

  • PDF

삼천포 수역 죽방렴의 어구구조와 해수유동 특성 (Characteristics of Current Patterns and Structure of Bamboo Weir in Samchunpo Water Area)

  • 강경미;신현옥
    • 수산해양기술연구
    • /
    • 제38권1호
    • /
    • pp.69-78
    • /
    • 2002
  • In order to examine the directional suitability of the axis direction of the fishing gear against the current, the experiments were carried out at the bamboo weir in Samchunpo water area from January, 2000 to September, 2001 The results of the study are as follows: In the experimental fishing gear constructed in the "V" shape, the range between two reference piles located at the entrance was 2.5m. The direction of bamboo weir′s axis was 355.5$^{\circ}$ The length of the left wing and those from the reference pile to the starting point of a curve were 106.0m, 7.5m, respectively. The length of the right wing and those from the reference pile to the starting point of a curve were 79.0m, 10.0m, respectively. Depths around the left and right stone wall that drove the steel pile were 5.0~6.5m and 6.5~9.5m, respectively. Also, depths on the bamboo weir′s axis and around the sack were 7.0~8.0m and about 8.0m, respectively. The maximum height of stone walls at the point of the left wing, the right wing and around the sack on the bamboo weir\` axis were 3.0m, 4.7m and 4.0m, respectively, Widths of stone walls at the point of both of the wings and around the sack on the bamboo weir\`s axis were 10.0~l4.0m, 22.0~25.0m, respectively. The averaging current direction on ebb tide was measured two times and it was 169.2$^{\circ}$ but the direction had about a 6.3$^{\circ}$ difference from the bamboo weirs axis. The maximum current speed appeared two to three hours later from the time of high tide and the current speed over 80.0cm/s lasted during about two Hours on the ebb tide In the case of a straight type wing In the bamboo weir, the eddy out of the left wing was comparatively big and the current on the right side from the bamboo weir′s axis had a tendency in turning to the right wing side. But in the case of a curve type wing, the eddy and tendency reduced significantly. It was thought that the experimental fishing gear was set suitably from the result of this simulation.