• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.212-216
• /
• 2011

태양광 발전 시스템의 고장검출은 고장으로 인해 발생되는 기술적 및 경제적 손실을 최대한 줄이기 위한 첨단 기술로 각광을 받고 있다. 본 논문은 푸리에 신경회로망과 확률론적 의사결정법을 이용한 태양광 발전 시스템의 새로운 고장진단 알고리즘을 제안한다. 우선 태양광 시스템의 동적 모델링을 위하여 최급강하 기반 최적화 기법을 통해 신경회로망 모델을 구성하며 GLRT 알고리즘을 이용하여 태양광 시스템의 확률론적 고장검출 기법을 제안한다. 제안한 고장검출 알고리즘의 타당성 검증을 위하여 태양광 고장검출 테스트베드를 제작하여 실시간 실험을 실시하였으며 이 때 태양광으로부터의 신호는 직류 전력선 통신을 이용하였다.

• 센서학회지
• /
• 제24권6호
• /
• pp.368-372
• /
• 2015

In this paper, we proposed a post-processing technique for improving classification performance of electronic nose (E-Nose) system which may be occurred drift signals from sensor array. An adaptive radial basis function network using stochastic gradient (SG) and singular value decomposition (SVD) is applied to process signals from sensor array. Due to drift from sensor's aging and poisoning problems, the final classification results may be showed bias and fluctuations. The predicted classification results with drift are quantized to determine which identification level each class is on. To mitigate sharp fluctuations moving-averaging (MA) technique is applied to quantized identification results. Finally, quantization and some edge correction process are used to decide levels of the fluctuation-smoothed identification results. The proposed technique has been indicated that E-Nose system was shown correct odor identification results even if drift occurred in sensor array. It has been confirmed throughout the experimental works. The enhancements have produced a very robust odor identification capability which can compensate for decision errors induced from drift effects with sensor array in electronic nose system.

• 정보처리학회논문지B
• /
• 제14B권7호
• /
• pp.523-530
• /
• 2007

본 논문에서는 자동 독순(automatic lipreading)의 인식기로 쓰이는 은닉 마르코프 모델(HMM: hidden Markov model)의 새로운 확률적 최적화 기법을 제안한다. 제안하는 기법은 전역 최적화가 가능한 확률적 기법인 모의 담금질과 지역 최적화 기법을 결합하는 것으로써, 알고리즘의 빠른 수렴과 좋은 해로의 수렴을 가능하게 한다. 제안하는 알고리즘이 전역 최적해로 수렴함을 수학적으로 보인다. 제안하는 기법을 통해 HMM을 학습함으로써 기존의 알고리즘이 지역해만을 찾는 단점을 개선함으로써 향상된 독순 성능을 나타냄을 실험으로 보인다.

• 한국농공학회지
• /
• 제39권6호
• /
• pp.54-66
• /
• 1997

The objectives of this study is to introduce and apply neural network theory to real hydrologic systems for stochastic nonlinear predicting of daily runoff discharge in the river catchment. Back propagation algorithm of neural network model is applied for the estimation of daily stochastic runoff discharge using historical daily rainfall and observed runoff discharge. For the fitness and efficiency analysis of models, the statistical analysis is carried out between observed discharge and predicted discharge in the chosen runoff periods. As the result of statistical analysis, method 3 which has much processing elements of input layer is more prominent model than other models(method 1, method 2) in this study.Therefore, on the basis of this study, further research activities are needed for the development of neural network algorithm for the flood prediction including real-time forecasting and for the optimal operation system of dams and so forth.

• Smart Structures and Systems
• /
• 제10권4_5호
• /
• pp.331-351
• /
• 2012

In this study an output-only system identification technique for civil structures under ambient vibrations is carried out, mainly focused on using the Stochastic Subspace Identification (SSI) based algorithms. A newly developed signal processing technique, called Singular Spectrum Analysis (SSA), capable to smooth a noisy signal, is adopted for preprocessing the measurement data. An SSA-based SSI algorithm with the aim of finding accurate and true modal parameters is developed through stabilization diagram which is constructed by plotting the identified system poles with increasing the size of data matrix. First, comparative study between different approaches, with and without using SSA to pre-process the data, on determining the model order and selecting the true system poles is examined in this study through numerical simulation. Finally, application of the proposed system identification task to the real large scale structure: Canton Tower, a benchmark problem for structural health monitoring of high-rise slender structures, using SSA-based SSI algorithm is carried out to extract the dynamic characteristics of the tower from output-only measurements.

• Smart Structures and Systems
• /
• 제11권1호
• /
• pp.19-34
• /
• 2013

The objective of this paper is to develop on-line system parameter estimation and damage detection technique from the response measurements through using the Recursive Covariance-Driven Stochastic Subspace identification (RSSI-COV) approach. To reduce the effect of noise on the results of identification, discussion on the pre-processing of data using recursive singular spectrum analysis (rSSA) is presented to remove the noise contaminant measurements so as to enhance the stability of data analysis. Through the application of rSSA-SSI-COV to the vibration measurement of bridge during scouring experiment, the ability of the proposed algorithm was proved to be robust to the noise perturbations and offers a very good online tracking capability. The accuracy and robustness offered by rSSA-SSI-COV provides a key to obtain the evidence of imminent bridge settlement and a very stable modal frequency tracking which makes it possible for early warning. The peak values of the identified $1^{st}$ mode shape slope ratio has shown to be a good indicator for damage location, meanwhile, the drastic movements of the peak of $2^{nd}$ mode slope ratio could be used as another feature to indicate imminent pier settlement.

• International Journal of Reliability and Applications
• /
• 제13권1호
• /
• pp.1-17
• /
• 2012

This Paper deals with the stochastic behavior and failure analysis of a Viscose Staple Fibre Plant which produces fibre for making clothes. The fibre making plant is a complex system with various subsystems as: Vendor (supplies Charcoal and Sulphur, raw materials for the process), Carbon di sulphide Plant, Acid Plant, Pulp Plant and Processing Plant. The considered system can completely fail due to failure of any of the subsystems. The Carbon di Sulphide Plant can fail in two different ways, due to lack of Sulphur or Charcoal. Processing Plant has the configuration 5-out-of-10: d and 6-out-of-10: f. It is also assumed that the system can fail due to workers strike and catastrophic failure. All failures follow exponential time distribution whereas all repairs follow general time distribution. Preventive Maintenance policy has been applied to reduce the failure in the system. Various reliability characteristics such as transition state probabilities, steady state behavior, reliability, availability, M.T.T.F and the cost analysis have been obtained using supplementary variable technique and Gumbel-Hougaard copula methodology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.651-659
• /
• 2002

Component Mode Synthesis (CMS) is a dynamic substructuring technique to get an approximate eigensolutions of large degree-of-freedom structures divisible into several components. But, In practice. most of large structures are modeled by different teams of engineers. and their respective finite element models often require different mesh resolutions. As a result, the finite element substructure models can be non-conforming and/or incompatible. In this work, A hybrid version of component mode synthesis using a localized lagrange multiplier to treat the non-conforming mesh problem was derived. Evolution Strategies (ESs) is a stochastic numerical optimization technique and has shown a robust performance for solving deterministic problems. An ESs conducts its search by processing a population of solutions for an optimization problem based on principles from natural evolution. An optimization example for raising the first natural frequency of a plate structure using beam stiffeners was presented using hybrid component mode synthesis and robust evolution strategies (RES) optimization technique. In the example. the design variables are the positions and lengths of beam stiffeners.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.196-206
• /
• 2012

능동 위상 배열 레이더(AESA Radar: Active Electronically Scanned Array radar)는 전자적으로 빔을 조향함으로써 빔 조향 시간이 비약적으로 빨라져 기존의 기계식 빔 조향 레이더에 비해 레이더에서 수행할 수 있는 다중 임무 처리 능력이 크게 향상되었다. 이러한 이유로 레이더에 주어진 시간, 에너지, 처리 능력 등의 한정된 자원을 실시간으로 효율적으로 관리, 운용할 수 있는 레이더 자원 관리 기술의 중요성이 크게 대두되었다. 그 중 레이더 빔 스케줄링 기술은 레이더 자원 관리의 핵심적인 요소라 할 수 있다. 본 논문에서는 simulated annealing을 이용한 추계적 레이더 빔 스케줄링 알고리즘을 제안하고, 이를 기존의 dispatching rule에 기반한 빔 스케줄링 기법과 비교하였다. 빔 처리 지연도(latency)와 주어진 시간 내에서 처리할 수 있는 빔의 개수 측면에서 스케줄링 결과를 비교하여 성능의 우월성을 입증하였으며, 또한 실시간성을 보장하면서도 기존의 규칙 기반 알고리즘보다 성능이 우수함을 보였다.

• 한국통신학회논문지
• /
• 제8권3호
• /
• pp.105-112
• /
• 1983

本論文은 線形空間的不變인 段損(blur)과 自色가우스性雜音에 의해 損傷된 映像에 대한 循環復元(recursive restoration)技法을 論하였다. 映像은 確率設計學的으로 그 平均과 相關函數(correlation function)에 의해 特徵지워진다. 隣接모델(neighborhood model)에 指數的自己相關函數(exponential autocorrelation function)가 사용되며 解析이 간단하고 편리하므로 映像度相關函數를 나타내는데 벡터 모델이 사용된다. 이 벡터 모델을 基本으로 한 映像表現에 있어서 離散的, 統計學的인 12點隣接모델이 開發되고 次元의 增加를 抑制하며 破損되고 雜音섞인 映像을 復元하기 위한 窓(window)移動處理技法이 使用되었다. 12點隣接모델 8點隣接모델보다 優秀한 것으로 나타나며 隣接의 많은 畵素를 요하는 精密畵像에 適合함을 보인다. 이 結果는 線形필터링을 요하는 映像處理에 널리 이용될 수 있음을 나타낸다.