• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.495-498
• /
• 2004

In this paper, the arc and flame characteristics of wires were studied during a short-circuit. The short-circuit angle between wires was fixed as $90^{\circ}$ and the experiments were conducted on bare copper wires by varying the diameter of wires. The arc and flame patterns were taken by a high speed imaging system. The direction of arc and flame was explained with Lorentz force. After the short-circuit experiment, the shapes of molten wires were analyzed by a stereo microscope. In the results of experiment, the arc and flame of wires showed particular patterns. The flame characteristics by the diameter of wires were analyzed using a HSIS. We could find out the arc characteristics of wires which were different by the diameter.

• 한국식물병리학회지
• /
• 제14권2호
• /
• pp.136-144
• /
• 1998

Many cloves of native cultivated garlics in Korea were found to be infested by mites when observed with stereo-microscope. The mite was identified by light and scanning electron microscopic observation as Aceria tulipae. Surveying viruses from the vegetatively propagated garlic, highly flexuous, filamentous particles (700∼800 nm) were detected in Aceria tulipae, local lesions of Chenopodium murale after sap transmissions, mosaic garlic leaves inoculated with mite-borne virus by transmission of Aceria tulipae and naturally infected garlic leaves. The mite-borne virus isolated did not react with antisera of aphid-borne potyviruses (LYSV-G, LYSV-L, WoYSV) or carlavirus (GLV), but reacted with antisera of garlic mite-borne viruses (GV-C, GMbMV). In ultratin sections of mite-borne virus infected garlic tissues, aggregates of virus particles and membrane proliferations were found in the parenchyma cells, but cytoplasmic cylindrical inclusions were not observed. Heavily mite-infested plants showed streaking and malformation due to mite feeding. The mite-borne virus was identified as garlic mite-borne mosaic virus (GMbMV), the mite-borne genus Rymovirus of the Potyviridae by mite transmission, morphology of virus particles, serological relationships, host range, distribution pattern of virus particles and inclusion bodies in the infected cells. The results demonstrate that mite-borne virus is one of the major viruses infecting native cultivated garlic plants showing mosaic or streak symptoms in Korea.

• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.55-63
• /
• 1987

The purpose of this study is to evaluate the effect of dentin bonding agents on marginal leakage. V-shaped cavities were prepared on the faciocervical area of 140 extracted human teeth. In Groups of twenty cavities, they were restored as follow: Group 1 with enamel bonding resin and Silux, Group 2 Scotchbond and Silux, Group 3 enamel bonding resin and Heliomolar, Group 4 Dentin Adhesit and Heliomolar, Group 5 enamel bonding resin and Durafill, Group 6 Dentin Adhesive and Durafill, Group 7 Chembond. All specimens were thermocycled alternatively at $4^{\circ}C$ and $60^{\circ}C$ of 2% methylene blue dye solution, and sectioned faciolingually with diamond disk under water spray. The sectioned specimens observed with stereo microscope. Following results were obtained: 1. The groups filled with Scotchbond-Silux or Dentin Adhesit-Heliomolar had appeared lesser marginal leakage compared with the groups with enamel bonding resin-Silux or enamel bonding resin-Helimolar. 2. The group filled with Dentin Adhesive-Durafill did not show the reduction of the marginal leakage compared with the group with enamel bonding resin-Durafill. 3. There was significant difference among the four dentin bonding agents. Scotchbond showed the greatest marginal sealing ability, and Dentin Adhesit was the next. The marginal sealing ability of Dentin Adhesive was the worst.

• 한국광물학회지
• /
• 제25권2호
• /
• pp.105-115
• /
• 2012

강화제는 손상된 석조문화재를 보존하기 위해 널리 사용되고 있다. 본 연구에서는 기 개발된 표면 강화제를 화강암, 사암, 대리암에 적용시킨 후 암석 광물학적 특성변화를 연구하기 위하여 개발된 강화제를 화강암, 대리암, 사암에 적용하여 강화제의 효율에 대한 현장평가를 실시하였다. 강화제 현장 적용 대상암석에 대하여 X-선회절분석, 쌍안실체현미경, 편광현미경, 주사전자현미경 관찰 등을 실시하였으며, 본 연구에 사용한 강화제는 개발한 2종 100%1T1G, 3%40nm/97%1T1G이다. 개발 강화제 처리 후 암석 표면변화에 대한 연구 결과에 의한 효과는 화강암의 경우 3%40nm/97%1T1G가 아주 우수하고, 사암의 경우 3%40nm/97%1T1G 약간 우수하며, 대리암의 경우 3%40nm/97%1T1G와 100%1T1G는 유사하다. 강화제 처리 전후의 특성은 각 강화제에 따라 다르며 향후 손상된 석조문화재에 강화제를 처리할 경우 이 연구 결과를 적용할 수 있을 것으로 생각된다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.64-64
• /
• 2019

In order to evaluate the taxonomical relevance of seeds morphological characteristics, a macroand micro-morphological study was conducted on seeds of Korean Vicia (Fabacea). We collected 19 taxa of genus Vicia distributed in Korea and introduced one taxa from USDA. The morphological characteristic and testa texture of seeds were investigated using a Stereo-microscope (SM) and Scanning Electron Microscope (SEM). Most of Vicia seeds were found spherical or oblong and some seeds were oval and subglose. The largest seed was V. chosenensis ($4.3{\times}3.6{\times}2.6mm$), and the smallest was V. teterasperma ($1.7{\times}1.7{\times}1.5mm$). V. chosenensis and V. hirsuta were separated from other Vicia species by having a shiny in seed finish. In hilum shape, 14 species have linear and V. sepium was distinguished by having a circumlinear. In testa texture, they developed papilae, only V. hirsuta has lophate in level type. Deposition of the sheet-like debris between the papilae was observed in V. chosenensis, V. cracca, and V. unijuga. Polymorphism information content (PIC) values of the 13 qualitative morphological characters (QMC) were in the range of 0.0950 to 8863 with an average of 0.4611. PIC value of seed shape, seed colour, hilum colour were 0.7403, 0.8177, 0.883 respectively. Cluster analysis based on QMC detected three main clades. V. cracca, V. amurensis, V. amoena were involved in Group 1 and V. unijuga f. minor, V. unijuga, V. unijuga f. angustifolia, V. sepium, V. hirticalycina, V. hirsuta, V. linearfolia, V. chosenensis, V. pseudorobus, V. venosa var. cuspidata were involved in Group 2. V. nipponica, V. japonica, V. villosa, V. dasicarpa, V. bungei, V. angustifolia, V. tetrasperma were clustered in Group 3. Our research suggests that morphological characteristic and testa texture of seeds could be used as definers for the identification of genus Vicia.

• 박물관보존과학
• /
• 제26권
• /
• pp.67-82
• /
• 2021

국립부여박물관 소장 금제구슬 2점(부여5336)은 1993년 부여 능산리 공방터 주변에서 발견된 것으로 백제 시대에 제작된 누금제품이라는 희소성과 완형의 형태를 갖추고 있어 제작기법을 살펴볼 수 있는 매우 중요한 자료이다. 본 연구에서는 이동형 엑스선형광분석기와 실체현미경 및 분광분석기 부착 주사전자현미경 분석을 통해 금제구슬의 성분 조성을 확인하고 미세 형태와 표면 상태 관찰, 접합 부위 성분 분석을 통해 제작 기법을 살펴보았다. 금제구슬은 속이 비어있는 형태로 구멍을 뚫은 뒤 그 주변을 금선으로 둘러 장식하였으며 나머지 부분을 금알갱이로 장식하였다. 일부에서 금알갱이를 먼저 금판에 접합하고 금알갱이 위에 금선이 올라간 형태를 확인할 수 있었으며 금선과 금알갱이 모두 23.6K~23.7K로 분석되었다. 누금의 접합 부위 일부에서는 구리의 함량이 높게 검출되었으며 재현 실험 및 제작 방법 연구 결과를 참고로 하여 볼 때 구리확산법을 사용하여 제작한 것으로 추정된다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.529-539
• /
• 1998

A quantitative study of impact damage of ${Al_2}}O_3}-TiO_2$ plasma coated soda-lime glasses was carried out and compared with that of the uncoated smooth glass specimen. The shape of cracks by the impact of steel ball was observed by stereo-microscope and the decrease of the bending strength due to the impact of steel ball was measured through the 4-point bending test. At the low velocity, cone cracks were occurred. As the impact velocity increases, initial lateral cracks were propagated on the slanting surface of a cone crack, and radial cracks were generated at the crushed site. When the impact velocity of steel ball exceeds the critical velocity, the contact site of specimen was crushed due to plastic deformation and then radial and lateral cracks were largely grown. Crack length of coated specimens was smaller than that of uncoated smooth specimen due to the effect of coating layer on the substrate surface. According to impact velocity, the bending strength of coated specimens had no significant difference, compared with that of the uncoated smooth specimen. But this represents that the bending strength of coated specimens was increased, considering the effect of sand blasting damage which was performed to increase the adhesion force of coating layer.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.606-617
• /
• 2000

The purpose of this study was to measure the marginal fidelities and the fracture strength of IPS Empress $2^{(R)}\;and\;In-Ceram^{(R)}$ ceramic crowns. After constructed of 12 experimental dies for each group, ceramic crowns were fabricated on the metal master dies prepared on the maxillary right premolar Marginal gaps were measured on the specimen between the margin of each crown and finish-ing line of the metal master die by using stereo-microscope($SZ-ST^{(R)}$ Olympus, Japan) and all specimens were cemented on the metal master die with Bistite $II^{(R)}$ (Tokuyama soda Co, LTD., Japan) resin cement. Finally marginal gaps were measured again. To measure of the fracture strength, buccal incline on the functional cusp of specimens were loaded until the catastrophic failure occurred by using the AGS-1000 $D^{(R)}$(Shimadzu, Japan). The result of marginal fidelities and fracture strength were statistically analyzed with the SPSS version 8.0 programs. The results of this study were as follows : 1. No significant difference was found in the mean marginal fidelities and fracture strength between the IPS Empress $2^{(R)}\;and\;In-Ceram^{(R)}$. 2. In comparison of marginal fidelities between before and after cementation, there was significant difference(P<0.05). The IPS Empress 2 system was shown in this study that had good marginal fidelities and fracture strength compared to In-Ceram ceramics. Although this system was acceptable to clinical applications, the system still has to be considered long-term researches about marginal fidelities and fracture strength due to the lack of data about the clinical researches.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.515-525
• /
• 2016

The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.506-515
• /
• 1999

Dental practice can produce and spread some infectious diseases from patients to dentist, dental assistant, and dental labors. One possible method for preventing these cross-contamination is to immerse dental impression in chemical disinfectants. So for many investigators studied on the dimensional changes of dental impressions and on the surface qualities of stone casts made from impression following immersion in disinfectants. This study was proposed to evaluate some popular impression disinfectant combination from the point of dimensional stability. Impression was taken from dental arch-shaped metal model. Irreversible hydrocolloid and 3 elastomers(polyvinyl siloxane, polysulfide, polyether) were immersed in 3 disinfectants (2% glutaraldehyde, 1% povidone-iodine, 0.5% sodium hypochlorite) for 10 minutes and measured both cross-arch and anterior-posterior distance under stereo microscope to evaluate dimensional change. The results obtained were as follows: 1. Dimensional changes of irreversible hydrocolloid impression was statistically different in cross-arch and anterior-posterior distance when immersed in 2% glutaraldehyde solution and in anterior-posterior distance when immersed in 0.5% sodium hypochlorite solution from control group (p<0.05). 2. Dimensional changes of polyvinyl siloxane and polysulfide impression were not statistically different from control group (p>0.05). 3. Dimensional changes of polyether impression was statistically different in cross-arch distance when immersed in 0.5% sodium hypochlorite solution and in anterior-posterior distance when immersed in 1% povidone-iodine solution from control group (p<0.05). 4. In all cases, dimensional changes were less than 0.1% from the original dimension and concluded clinically acceptable.