• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.514-523
• /
• 2004

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-embedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 80 frames of the test input stereo image, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.82, 1.11, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.99-107
• /
• 1998

A stereo vision system such as the structure of human's eyes has two cameras at separated positions from which we can obtain two input images and then put them together to create 3-D image. It can show more virtual effect than the conventional 2-D image system. But, the stereo image system has to control the convergence angle so that the stereo disparity could always be zero because observers can be fatigued and unconscious of stereo image in conditions that the stereo disparity is not zero for a long work. Therefore, in the paper, optical JTC system which can process adaptive tracking of a specific moving object is proposed as a new approach to keep the stereo disparity to be zero. In this method, optical JTC system obtains the values of the relative locations of a moving objects in left and right images and then these values are used for maintaining the stereo disparity to be zero. Through some optical experiments the proposed stereo vision system is proved to be insensitive to background noises and operate in real-time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1637-1644
• /
• 2003

Stereoscopic particle image velocimetry is a measurement technique to acquire three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced from out-of$.$plane velocity components using a stereoscopic matching method. Most industrial fluid flows are three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Miniature Stereo-PIV(MSPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some primitive experimental results of the Miniature Stereo-PIV system. The Miniature Stereo-PIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Miniature Stereo-PIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.380-393
• /
• 2015

This study presents how we can evaluate stereo camera systems for the structural deformation monitoring. A stereo camera system, consisting of a set of stereo cameras and reflective markers attached on the structure, is introduced for the measurement and the stereo pattern recognition (SPR) method is utilized for the full-field structural deformation estimation. Performance of this measurement system depends on many parameters including types and specifications of the cameras, locations and orientations of them, and sizes and positions of markers; it is difficult to experimentally identify the effects of each parameter on the measurement performance. In this study, a simulation framework for evaluating performance of the stereo camera systems with various parameters has been developed. The maximum normalized root-mean-square (RMS) error is defined as a representative index of stereo camera system performance. A plate structure is chosen for an introductory example. Its several modal harmonic vibrations are generated and estimated in the simulation framework. Two cases of simulations are conducted to see the effects of camera locations and the resolutions of the cameras. An experimental validation is carried out for a few selected cases from the simulations. Using the simultaneous laser displacement sensor (LDS) measurements as the reference, the measurement errors are obtained and compared with the simulations.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.65-76
• /
• 2003

The analysis of cow body parameters is important to provide some useful information fur cow management and cow evaluation. Present methods give many stresses to cows because they are invasive and constrain cow postures during measurement of body parameters. This study was conducted to develop the stereo vision system fur non-invasive analysis of cow body features. Body feature parameters of 16 heads at two farms(A, B) were measured using scales and nineteen stereo images of them with walking postures were captured under outdoor illumination. In this study, the camera calibration and inverse perspective transformation technique was established fer the stereo vision system. Two calibration results were presented for farm A and fm B, respectively because setup distances from camera to cow were 510 cm at farm A and 630cm at farm B. Calibration error values fer the stereo vision system were within 2 cm for farm A and less than 4.9 cm for farm B. Eleven feature points of cow body were extracted on stereo images interactively and five assistant points were determined by computer program. 3D world coordinates for these 15 points were calculated by computer program and also used for calculation of cow body parameters such as withers height. pelvic arch height. body length. slope body length. chest depth and chest width. Measured errors for body parameters were less than 10% for most cows. For a few cow. measured errors for slope body length and chest width were more than 10% due to searching errors fer their feature points at inside-body positions. Equation for chest girth estimated by chest depth and chest width was presented. Maximum of estimated error fur chest girth was within 10% of real values and mean value of estimated error was 8.2cm. The analysis of cow body parameters using stereo vision system were successful although body shape on the binocular stereo image was distorted due to cow movements.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.159-164
• /
• 2006

Objectives : This study was conducted to evaluate the effects of the personal stereo system on the hearing in adolescents. Methods : A total of 68 adolescents(age: 13-18 years) who visited the ENT Department at a University Hospital in Daegu were personally interviewed. The questionnaires were about general characteristics of the subjects, the time of personal stereo system use (year, hour) and place. Cumulative exposure to the personal stereo system was calculated by the product of the total years and the daily hours of their use. Pure tone audiometry was performed and the hearing threshold was measured at 500, 1000, 2000, 4000 and 8000 Hz. Results : The average time of using a personal stereo system a day was about 3 hours and 75% of the subjects used a personal stereo system for 2-5 years. The elevation of threshold was more prominent in the subjects who used personal stereo systems for 4 years and more compared with those subjects who used them for 3 years and under. The elevation of hearing threshold was also more prominent in the subjects who used personal stereo systems for 4 hours and more a day compared with those subjects who used personal stereo systems for 3 hours and under a day. The elevation of hearing threshold was more prominent in the subjects who used personal stereo systems for 13 hour. years and more compared to the subjects who used them 12 hour. years and under. Conclusions : These results suggest that the elevation of hearing threshold can happen to adolescents who used personal stereo systems for a long time. In order to prevent hearing loss, we need to teach adolescents appropriate usage of the personal stereo system and hearing tests should be included in the periodic school-based physical examination for the adolescents.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.9-17
• /
• 2007

Feature based stereo matching is an effective way to perform 3D building reconstruction. However, in urban scene, the cluttered background and various building structures may interfere with the performance of building reconstruction. In this paper, we propose a novel method to robustly reconstruct buildings on the basis of rectangle regions. Firstly, we propose a multi-scale linear feature detector to obtain the salient line segments on the object contours. Secondly, candidate rectangle regions are extracted from the salient line segments based on their local information. Thirdly, stereo matching is performed with the list of matching line segments, which are boundary edges of the corresponding rectangles from the left and right image. Experimental results demonstrate that the proposed method can achieve better accuracy on the reconstructed result than pixel-level stereo matching.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.454-457
• /
• 2004

AGV for FMS must be detected an obstacle. Therefore, many studies have been advanced, and recently, the ultra sonic sensor is used for this. However, the new method has to be developed because the ultra-sonic-sensor has many problems as a noise in factory, an directional error and detection of the obstacle size. So, we study the fast stereo vision system that can give more information to obstacles for intelligent AGV system. For this, the simulated AGV system was made with two CCD cameras in front to get the stereo images, and the threshold process by color information (intensity and chromaticity) and structure stereo matching method were constructed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.400-405
• /
• 2009

A new method for the catadioptric omnidirectional stereo vision with single camera is presented in this paper. The proposed method uses a concave lens with a convex mirror. Since the optical part of the proposed method is simple and commercially available, the resultant omnidirectional stereo system becomes versatile and cost-effective. The closed-form solution for 3D distance computation is presented based on the simple optics including the reflection and the reflection of the convex mirror and the concave lens. The compactness of the system and the simplicity of the image processing make the omnidirectional stereo system appropriate for real-time applications such as autonomous navigation of a mobile robot or the object manipulation. In order to verify the feasibility of the proposed method, an experimental prototype is implemented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.915-919
• /
• 2003

This paper presents a fuzzy-motion-control based tracking algorithm of mobile robots, which uses the geometrical information derived from the active stereo-vision system mounted on the mobile robot. The active stereo-vision system consists of two color cameras that rotates in two angular dimensions. With the stereo-vision system, the center position and depth information of the target object can be calculated. The proposed fuzzy motion controller is used to calculate the tracking velocity and angular position of the mobile robot, which makes the mobile robot keep following the object with a constant distance and orientation.