• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1175-1180
• /
• 1991

The purpose of this paper is to improve the matching accuracy in identifying corresponding points in the area-based matching for the processing of stereo vision. For the selection of window size, a new method is proposed based on frequency domain analysis. The effectiveness of the proposed method is confirmed through a series of experiments. To overcome disproportionate distortion in stereo image pair, a new matching method using the warped window is also proposed. In the algorithm, the window is warped according to imaging geometry. Experiments on a synthetic image show that the matching accuracy is improved by 14.1% and 4.2% over the rectangular window method and image warping method each.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.500-505
• /
• 2013

In this paper, we propose a novel framework to evaluate the depth resolution of axially distributed stereo sensing (ADSS) under fixed resource constraints. The proposed framework can evaluate the performance of ADSS systems based on various sensing parameters such as the number of cameras, the number of total pixels, pixel size and so on. The Monte Carlo simulations for the proposed framework are performed and the evaluation results are presented.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.354-360
• /
• 2013

A stereo vision analysis was performed for motion and depth control of unmanned vehicles. In stereo vision, the depth information in three-dimensional coordinates can be obtained by triangulation after identifying points between the stereo image. However, there are always triangulation errors due to several reasons. Such errors in the vision triangulation can be alleviated by careful arrangement of the camera position and orientation. In this paper, an approach to the determination of the optimal position and orientation of camera is presented for unmanned vehicles.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.339-345
• /
• 2000

KOMPSAT-1 was launched on 21 December, 1999 and the main mission of the satellite is the cartography to provide the imagery from a remote earth view for the production of maps of Korean territory. For this purpose, the satellite has capability to tilt the spacecraft utmost $\pm$45 degrees to acquire stereo satellite imagery in different paths. This study aims to estimate the three dimensional positioning accuracy of stereo satellite imagery from EOC(electro-optical camera), a payload of KOMPSAT-1 satellite. For this purpose, the ground control points and check points were obtained by GPS surveying. The sensor modeling and the adjustment was performed by PCI software installed in KARI (Korea Aerospace Research Institute), which contained mathematical analysis module for KOMPSAT-1 EOC. The study areas were Taejon and Nonsan, placed in the middle part of Korea. As a result of this study, we found that the RMSE(root mean square error) value of three dimensional positioning KOMPST-1 stereo imagery can be less than 1 pixel (6.6 m) if we can use about 10 GCPs(ground control points). Then, a standarrd of FGDC (Federal Geographic Data Committee) of USA was applied to the result to estimate the three dimensional positioning accuracy of KOMPSAT-1 stereo imagery.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.471-478
• /
• 2016

This paper proposes the results of analysis of correlation between satellite geometry elements for an effective use of satellite images. To achieve accurate positional information, stereo images have normal range of convergence and BIE (BIsector Elevation) angles which are greatly influenced by azimuth and elevation angle of individual image. In this paper, the variations of convergence and BIE angles are estimated according to azimuth angle differences between two images and each elevation angle. The analysis provided strong support for predicting stereo geometry without complex analysis of epiploar geometry or mathematics. The experiment results showed that more than 150°, 130°, and 100° azimuth angle differences need to be constructed when elevation angle of two images is 50°, 60°, and 70°, respectively, in order to make the convergence and BIE angle within normal range. The results are expected to be fully used for various application using stereo images.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.471-482
• /
• 2019

The mission of the high-resolution camera for the lunar exploration is to provide 3D topographic information. It enables us to find the appropriate landing site or to control accurate landing by the short distance stereo image in real-time. In this paper, the ground verification and analysis system using the multi-application stereo camera to develop the high-resolution camera for the lunar exploration are proposed. The mission test items and test plans for the mission requirement are provided and the test results are analyzed by the ground verification and analysis system. For the realistic simulation for the lunar orbiter, the target area that has similar characteristics with the real lunar surface is chosen and the aircraft flight is planned to take image of the area. The DEM is extracted from the stereo image and compose three dimensional results. The high-resolution camera mission requirements for the lunar exploration are verified and the ground data analysis system is developed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.123-132
• /
• 2021

To determine 3D(three-dimensional) positions using a stereo-camera in close-range photogrammetry, camera calibration to determine not only the interior orientation parameters of each camera but also the relative orientation parameters between the cameras must be preceded. As time passes after performing camera calibration, in the case of non-metric cameras, the interior and relative orientation parameters may change due to internal instability or external factors. In this study, to evaluate the stability of the stereo-camera, not only the stability of two single cameras and a stereo-camera were analyzed, but also the three-dimensional position accuracy was evaluated using checkpoints. As a result of evaluating the stability of two single cameras through three camera calibration experiments over four months, the root mean square error was ±0.001mm, and the root mean square error of the stereo-camera was ±0.012mm ~ ±0.025mm, respectively. In addition, as the results of distance accuracy using the checkpoint were ±1mm, the interior and relative orientation parameters of the stereo-camera were considered stable over that period.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.144-144
• /
• 2002

Analysis techniques using stereo-photos of object is used widely in close-range-photogrammetry field. but, there is difficulty to use metric camera for specialist. In this study, stereo images were acquired using metric camera and general digital camera about slide in Youngdong area. And they were generated two DEMs based metric camera and digital camera. And it was analyzed the correlation of two DEMs. Therefore, in research that was presented effectiveness of digital camera take the place of metric camera for slope analysis.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.64-75
• /
• 1993

This paper proposes a recovering technique of the elevation map by stereo modeling of the aerial image sequence which is transformed based on the aircraft situation. The area-based stereo matching method is simulated and the various parameters are experimentally chosen. In a depth extraction step, the depth is determined by solving the vector equation. The equation is suitable for stereo modeling of aerial images which do not satisfy the epipolar constraint. Also, the performance of the conventional feature-based matching scheme is compared. Finally, techniques analyzing the accuracy of the recovered elevation map (REM) are described. The analysis includes the error estimation for both height and contour lines, where the accuracy is based on the measurements of deviations from the estimates obtained manually. The experimental results show the efficiency of the proposed technique.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.12
• /
• pp.659-666
• /
• 2000

A stereo matching has been an important tool for reconstructing three dimensional terrain. By using stereo matching technique, DEM(Digital Elevaton Map) can be generated by the disparity from a reference image to a target image. Generally disparity map can be evaluated by matching the reference image to the target image and if the role of the reference and the target are interchanged, a different DEM can be obtained. In this paper, we propose a new fusion technique to estimate the optimal DEM by eliminating the false DEM due to occlusion. To detect the false DEM, we utilize two measure of accuracy: self-consistency and cross-correlation score. We test the effectiveness of the proposed methods with a quantitative analysis using simulated images. Experimental result indicate that the proposed methods show 24.4% and 33.1% improvement over either DEM.