• Journal of Korean Society of Rural Planning
• /
• v.19 no.3
• /
• pp.107-116
• /
• 2013

In this study, it provides the diagnostic index for the rural landscape formation. For the development of diagnostic index, this study first analyzed documents and papers on the landscape formation. Landscape types are also classified by their function and then landscape index was developed by AHP method. Classification system was categorized as three steps: 2 items for 1st step, 10 items for 2nd step, and 20 items(criteria) for 3rd step. In the survey of weighting values with AHP method, the analysis result for the first step showed that rural village landscape is more important than landscape around the village by approximately 20%. In the second step, residence is rated as the most important, followed by village tree planting, and then farmland around the rural villages, greenery, and water environment. In the third step, the feng shui is rated as the most important, followed by tree planting, village forest, culture, and history. While vehicle maintenance, village alleys and pedestrian facilities are rated lower. In index of the around the village, weighting value for index of the farm land and skyline has the highest value. While species richness, water quality and water resources were rated relatively low. In the future, the rural landscapes diagnosis index will be applied to measure the level of the rural villages landscapes and it is expected to propose political support for the landscapes formation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.80-80
• /
• 2000

The GPS can provide accurate position information on the earth. But GPS receiver can't give position information inside buildings. DR(Dead-Reckoning) or INS(Inertial Navigation System) gives position information continuously indoors as well as outdoors, because they do not depend on the external navigation information. But in general, the inertial sensors severely suffer from their drift errors, the error of these navigation system increases with time. GPS and DR sensors can be integrated together with Kalman filter to overcome these problems. In this paper, we developed a personal navigation system which can be carried by person, using GPS and electronic pedometer. The person's footstep is detected by an accelerometer installed in vertical direction and the direction of movement is sensed by gyroscope and magnetic compass. In this case the step size is varying with person and changing with circumstance, so determining step size is the problem. In order to calculate the step size of detected footstep, the neural network method is used. The teaming pattern of the neural network is determined by human walking pattern data provided by 3-axis accelerometer and gyroscope. We can calculate person's location with displacement and heading from this information. And this neural network method that calculates step size gives more improved position information better than fixed step size.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.141-144
• /
• 2005

Contents of this paper strengthen security of data by applying encryption algorithm to use cellular phone and settlement by Mobile that is used synchronization method and quotes and prevent damage of bar-code peculation etc.. If divide system step by step to execute this, step that create Mobile bar-code and transmits by individual terminal after encryption, step displaying to individual Mobile terminal, step that above individual Mobile terminal and main server form assimilation and these are consisted of step that quote confirming above information confirmation and motive availability. For the actual example, confirm effectiveness of certification system through simulation.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.251-255
• /
• 2019

We propose a two-step lithography process to minimize edge-bead issues caused by thick photoresist (PR) coating. In the conventional PR process, the edge bead can be efficiently removed by applying an edge-bead removal (EBR) process while rotating the silicon wafer at a high speed. However, applying conventional EBR to the production of desired PR mold with unique negative patterns cannot be used because a lower rpm of spin coating and a lower temperature in the soft bake process are required. To overcome this problem, a two-step lithography process was developed in this study and applied to the fabrication of a polydimethylsiloxane (PDMS) film having super-hydrophobic characteristics. Following UV exposure with a first photomask, the exposed part of the silicon wafer was selectively removed by applying a PR developer while rotating at a low rpm. Then, unique PR mold structures were prepared by employing an additional under-exposure process with a second mask, and the mold patterns were transferred to the PDMS. Results showed that the fabricated PDMS film based on the two-step lithography process reduced the height difference from 23% to 5%. In addition, the water contact angle was greatly improved by spraying of hydrophobic nanosilica on the dual-scaled PDMS surface.

• 베이커리
• /
• no.2 s.427
• /
• pp.159-161
• /
• 2004

• Water Engineering Research
• /
• v.5 no.4
• /
• pp.195-206
• /
• 2004

This paper deals with oxygen transfer by air entrainment and energy dissipations by flow characteristics at the stepped drop structure. Nappe flow occurred at low flow rates and for relatively large step height. Dominant flow features included an air pocket, a free-falling nappe impact and a subsequent hydraulic jump on the downstream step. Most energy was dissipated by nappe impact and in the downstream hydraulic jump. Skimming flow occurred at larger flow rates with formation of recirculating vortices between the main flow and the step comers. Oxygen transfer was found to be proportional to the flow velocity, the flow discharge, and the Froude number. It was more related to the flow discharge than to the Froude number. Energy dissipations in both cases of nappe flow and skimming flow were proportional to the step height and were inversely proportional to the overflow depth, and were not proportional to the step slope. The stepped drop structure was found to be efficient for water treatment associated with substantial air entrainment and for energy dissipation.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.126-129
• /
• 1991

The effect of each tooth for optimal design of Hybrid permanent magnet step motor is presented on this paper. For this consideration, Hybrid permanent magnet step motor was designed in the first consideration tooth structure on the stator and the rotor and poles structure, as number of teeth on the stator and the rotor and slot depth and pitch of teeth, simulated by AutoLISP. During actual rotating, a chracteristic of Hybrid permanent magnet step motor which designed by AutoLISP program is considered. A chracteristic of Hybrid permanent magnet step motor is considered in change each variable, also. As a result, it was found that characteristic of Hybrid permanent magnet step motor changed in accordance with tooth structure and number of teeth and optimal design is possible by AutoLISP.

• Journal of the Korean housing association
• /
• v.10 no.2
• /
• pp.247-257
• /
• 1999

This study is aimed to propose the evaluation model of forecasting visual quality of apartment buildings, which would be a useful tool to make the architectural concepts corresponding to user needs. This study was carried out through the four-step experiments as follows. The first step is to take the user's visual evaluation construct. To do this, the 22 adjective phrases were extracted, which were applicable to all apartment buildings. The second step is to analyze the user's visual preference, which is measured by the user's psychological quantity on the apartment buildings by S. D.(Semantic Differential) Method. The third step is to analyzethe five psychological-factors obtained from the Factor Analysis. The perceptual images on the 41 experimental subjects were checked up through evaluating and analyzing the factor scores of each subjects for each psychological-factor. The fourth step is to analyze, the similarity of various characters in a building, which is mirrored on the user's psychological quantity and how buildings are grouped by it.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.51-54
• /
• 1991

The effect of inductance for optimal design of Hybrid permanent magnet step motor is presented on this paper. A pull-out torque of Hybrid permanent magnet step motor is measured and calculated by varying stator coil inductances, and power consumption of the step motor also is calculated and compared to the measured value. The relation of developed torque to parer consumption by the changing of magnetomotive force magnitude in a rotor permanent magnet is studied, which is the essence of the step motor design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.911-914
• /
• 1997

This Experiment was carried out for bur minimization in drilling. New drill geometries are proposed to minimize the burr formation in drilling operation. Three types of drills are made, champer, round and step drill. The burr formed in first cutting by front cutting edge ca be removed in second cutting by the cutting edges in chamfer, round edge and step. New burrs are formed by second cutting and can be minimized according to the change of drill geometry like, chamfer size and angle, corner radius in round drill and step size and angle in step drill. To measure the burr formed in drilling, laser sensor is used.