• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.41-46
• /
• 1992

In this paper we report how to design integrated-mirror etalons for surface-emitting lasers and photonic switching without time-consuming numerical calculation. It consists of the following two-step process (step 1) find the minimum reflectance to achieve the maximum allowable linewidth. (step 2) find the number of the quarter-wave layers in each mirror to realize the reflectance given by step 1. The condition for maximum transmission in an integrated- mirror etalon is also derived. Under this condition we can achieve the required linewidth with the minimum number of quarterwave layers.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.124-128
• /
• 2009

In this study, the effect of multi-step purification or functionalization on physicochemical properties of multi-walled carbon nanotubes (MWNTs)/epoxy (EP) nanocomposites was investigated. The nanocomposites containing multi-step purified MWNTs showed a stronger influence on $T_g$ and increased in mechanical properties in comparison to nanocomposites containing the same amount of only purified MWNTs. Consequently, the multi-step purification of MWNTs led to an improvement of thermomechanical properties of nanocomposites, resulting from improving the intermolecular interaction of MWNTs in epoxy matrix resins.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.126-126
• /
• 2012

In this study, adhesion of plasma spray coated hydroxyapatite film on the two-step anodized dental implant was investigated. The plasma spray was carried out on the dental implant after two step anodization. The adhesion of coated HA film was investigated by FE-SEM after fatigue test. In the case of two-step anodized implant showed a good adhesion between implant and coated film.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.7-16
• /
• 2016

Purpose : This study aimed to compare and evaluate between the efficiency of two respective devices, 3D-bolus and step-bolus when the devices were used for the treatment of patients whose chest walls were required to undergo the electron beam therapy after the surgical procedure of modified radical mastectomy, MRM. Materials and Methods : The treatment plan of reverse hockey stick method, using the photon beam and electron beam, had been set for six breast cancer patients and these 6 breast cancer patients were selected to be the subjects for this study. The prescribed dose of electron beam for anterior chest wall was set to be 180 cGy per treatment and both the 3D-bolus, produced using 3D printer(CubeX, 3D systems, USA) and the self-made conventional step-bolus were used respectively. The surface dose under 3D-bolus and step-bolus was measured at 5 measurement spots of iso-center, lateral, medial, superior and inferior point, using GAFCHROMIC EBT3 film (International specialty products, USA) and the measured value of dose at 5 spots was compared and analyzed. Also the respective treatment plan was devised, considering the adoption of 3D-bolus and stepbolus and the separate treatment results were compared to each other. Results : The average surface dose was 179.17 cGy when the device of 3D-bolus was adopted and 172.02 cGy when step-bolus was adopted. The average error rate against the prescribed dose of 180 cGy was -(minus) 0.47% when the device of 3D-bolus was adopted and it was -(minus) 4.43% when step-bolus was adopted. It was turned out that the maximum error rate at the point of iso-center was 2.69%, in case of 3D-bolus adoption and it was 5,54% in case of step-bolus adoption. The maximum discrepancy in terms of treatment accuracy was revealed to be about 6% when step-bolus was adopted and to be about 3% when 3D-bolus was adopted. The difference in average target dose on chest wall between 3D-bolus treatment plan and step-bolus treatment plan was shown to be insignificant as the difference was only 0.3%. However, to mention the average prescribed dose for the part of lung and heart, that of 3D-bolus was decreased by 11% for lung and by 8% for heart, compared to that of step-bolus. Conclusion : It was confirmed through this research that the dose uniformity could be improved better through the device of 3D-bolus than through the device of step-bolus, as the device of 3D-bolus, produced in consideration of the contact condition of skin surface of chest wall, could be attached to patients' skin more nicely and the thickness of chest wall can be guaranteed more accurately by the device of 3D-bolus. It is considered that 3D-bolus device can be highly appreciated clinically because 3D-bolus reduces the dose on the adjacent organs and make the normal tissues protected, while that gives no reduction of dose on chest wall.

• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.165-172
• /
• 2007

Sanitary management with step-by-step working process and dietician's perception against them at 98 food service institutions located in Jeollabuk-Do were surveyed. Food service institutions included 13 hospitals, 38 schools,40 enterprises, and 7 others. Practice ratio of sanitary management items at purchasing and receiving step of food and food materials in food service institutions were 59.2-98.0%, and they were higher than those of other steps. In pre-treatment step, practice ratio of 'Undoing treatment of foods on the ground' in hospital was higher (53.8%) than those of enterprise (32.5%) and school (34.2%), and needed the improvement of pre-treatment procedure in enterprise and school. Practice ratio of all sanitary management items in cooking step were below 30%, and needed the improvement of cooking procedure. In storage step, the improvement of cooking procedure in school and enterprise were needed. Practice ratio of all sanitary management items in distribution step were low, and needed the improvement of this working procedure. However, in spite of low practice ratio on these items, dietician's perception against sanitary management items in all steps was low. Therefore, we estimated that the improvement of working processes and the conversion of dietician' perception on sanitary managements in food service institutions were needed.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.185-198
• /
• 2007

Spermiogenesis in Japanese white-toothed shrew. Crocidura dsinezumi was investigated by transmission electron microscope. Spermiogenesis was divided into 12 phases 14 steps, based on the morphological features of the nucleus and change of organelles in cytoplasm. The nucleus of spermatids in Golgi (step $1{\sim}2$) phase were spherical; however, they were changed into oval in the cap (step $3{\sim}6$) phase. Flagellum appeared in the middle of acrosomal phase; on the other hand, slender and long spermatid head was formed in maturation phase. The head of spermatids faced the lumen in step 1 to step 6 (from Golgi to cap phase), but, in step 7 to step 14 (from acrosomal to spermiation phase), it turned its head to the basal lamina of the seminiferous epithelium. The nucleus and acrosome were elongated maximally in step 10. The condensation of chromatin started in late acrosomal (step 10) phase, and it was completely finished and homogenized in the middle of maturation (step 12) phase. Multivesicular body appeared near the acrosomal vacuole during the middle cap (step 5) phase, and a large number of them were observed near the Golgi apparatus in the late cap (step 6) phase. Considering all the results, the spermiogenesis might be useful information to analyse the differentiation of spermatogenic fells.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.2
• /
• pp.191-200
• /
• 2000

Objective: This study was carried out to compare the effects of the stepwise exposure treatments on the morphological normality, fertilization and blastocyst formation rate of the frozen-thawed mouse mature oocytes by vitrification or ultra-rapid freezing and to use as a fundamental data for the cryopreservation of human oocytes. Materials and Methods: The morphological normality and fertilization rates of the vitrified and ultra-rapid frozen mouse mature oocytes after three-stepwise exposure treatments (1step, 3step and 5step) were observed. After choosing the 3step exposure treatment groups, we observed the morphological normality and fertilization, blastocyst formation rate of the vitrified and ultra-rapid frozen mouse mature oocytes. Results: The morphological normality and fertilization rates of the vitrified mouse mature oocytes after three-stepwise exposure treatments (1step, 3step and 5step) were 75%, 85%, 88% and 58%, 61 %, 54% respectively. There were no significant differences among treatments(p>0.05). The morphological normality and fertilization rate of the control was 92% and 65%. There were no significant differences in fertilization rate among control and treatments (p>0.05). The morphological normality and fertilization rates of the ultra-rapid frozen mouse mature oocytes after three-stepwise exposure treatments (1step, 3step and 5step) were 83%, 83%, 84% and 75%, 63%, 56% respectively. There were no significant differences among treatments (p>0.05). The morphological normality and fertilization rate of the control was 95% and 67%. There were no significant differences among control and treatments (p>0.05). The morphological normality and fertilization rate of the vitrified or ultra-rapid frozen mouse mature oocytes after 3step exposure treatment were 69% and 75%, respectively. The blastocyst formation rate was 60% and 57%. The results did not differ significantly between vitrification and ultra-rapid freezing (p>0.05). Conclusion: As known in the above results, there were no significant differences in the fertilization and blastocyst formation rate of the frozen-thawed mouse mature oocytes by vitrification or ultra-rapid freezing among the control and treatments. It is suggested that vitrification and ultra-rapid freezing method were effective for the cryopreservation of mouse mature oocytes.

• The Korean Journal of Applied Statistics
• /
• v.34 no.2
• /
• pp.239-254
• /
• 2021

This paper studies time series analysis with estimation and forecasting for Korean COVID-19 confirmed cases, based on the approach of a heterogeneous autoregressive (HAR) model with two-piece t (TP-T) distributed errors. We consider HAR-TP-T time series models and suggest a step-by-step method to estimate HAR coefficients as well as TP-T distribution parameters. In our proposed step-by-step estimation, the ordinary least squares method is utilized to estimate the HAR coefficients while the maximum likelihood estimation (MLE) method is adopted to estimate the TP-T error parameters. A simulation study on the step-by-step method is conducted and it shows a good performance. For the empirical analysis on the Korean COVID-19 confirmed cases, estimates in the HAR-TP-T models of order p = 2, 3, 4 are computed along with a couple of selected lags, which include the optimal lags chosen by minimizing the mean squares errors of the models. The estimation results by our proposed method and the solely MLE are compared with some criteria rules. Our proposed step-by-step method outperforms the MLE in two aspects: mean squares error of the HAR model and mean squares difference between the TP-T residuals and their densities. Moreover, forecasting for the Korean COVID-19 confirmed cases is discussed with the optimally selected HAR-TP-T model. Mean absolute percentage error of one-step ahead out-of-sample forecasts is evaluated as 0.0953% in the proposed model. We conclude that our proposed HAR-TP-T time series model with optimally selected lags and its step-by-step estimation provide an accurate forecasting performance for the Korean COVID-19 confirmed cases.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.28 no.1
• /
• pp.81-87
• /
• 2024

Purpose: CA 19-9 is the most widely used tumor marker for the diagnosis of digestive system tumor, especially pancreatic and biliary tract cancer. This study was conducted to improve the result value near reference range by comparing the reagents of CA 19-9 one step method and two step method. In addition, it was intended to establish a standard for selecting reagents. Material and Methods: 120 patients who visited the National Cancer Center in 2023 were selected as subjects for this study. The reagents used in the study were CA 19-9 IRMA kits (Shinjin, Korea) and three types of reagents were compared. Two step method reagent that is currently being used (A), one step method reagent (B) and two step method reagent improved by request (C) were compared and regression analysis was performed on their data. And we also performed recovery test, linearity test and hook effect test for each reagent. Result: There were 46 cases of reagent B in which the concentration value was lower than the result measured in reagent A that was previously used, and 77 cases of reagent C. As a result of regression analysis of reagents A, B, and C, the coefficients of determination of reagents A and B, reagents A and C, and reagents B and C were 0.653, 0.577, and 0.875. In the recovery rate test and the linearity test, the results of all reagents were good, and in the hook effect test, reagent B showed a hook effect at a low value. Conclusion: The improved reagent C appears to have been improved based on the concentration value of reagent B, which the manufacturer judged to be more stable at low concentrations. The hook effect in reagent B can be a fatal reason for disqualification when selecting reagents in general patient samples which high-concentration samples appear frequently. The first improved reagent C will be able to be used once it is confirmed that it has more stability for various concentration values.

• 베이커리
• /
• no.2 s.427
• /
• pp.159-161
• /
• 2004