• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.90-98
• /
• 2016

Currently government certified test method for an automobile remanufactured products is insufficient. Thus many automotive parts in the remanufacturing market are lacking proper evaluation criteria and production of defective products are causing customer dissatisfaction. In this paper a power steering oil pump, which requires stringent manufacturing standards, is studied by the failure mode and effect analysis approach. The research suggested that the test criteria such as discharge flow characteristic test, tightness test, pulley run-out test, pressure switch operation test, low temperature test and rotation pressure durability test should be performed to evaluate the reliability of remanufactured power steering oil pumps. As a result of tests, the performance of remanufactured power steering oil pump satisfied the evaluation criteria of pressure switch operation test and low temperature test. However, the remanufactured power steering oil pump failed to satisfy the evaluation criteria on discharge performance test, tightness test and pulley run-out test. These performance evaluation tests proved the necessity of standard process for the remanufactured power steering oil pump.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.321-327
• /
• 2006

The previous paper described the logic tuning, the vehicle manufacture and the evaluation in the HILS system for the purpose of the development of a Steer-By-Wire(SBW) system. This paper describes the content of applying to a new HILS system, the vehicle manufacture and the result of the evaluation performed in Independent-type SBW(I-SBW) system. Here, the SBW indicates the method of steering both tires by using one motor as the steering gear actuator, similar to the conventional steering system. On the other hand, the I-SBW means the method of steering both front tires independently by using dual motors as the steering gear actuator. As a result, the layout and the kinematical mechanism of the I-SBW system are quite different from those of the typical steering mechanism. Nevertheless, there is no change in the steering column motor system. In the report, we first describe the structure and control logic of the I-SBW system, and then the control effect on this system as applied for both the HILS system and a vehicle. Furthermore, our HILS system involves the actuator mechanism which realizes the reaction force of the road surface with a minimized frictional force in operation. Therefore, it is possible for us to tune the control logic via the HILS system and confirm the effect of the tuned control logic by applying it to a vehicle with the I-SBW system.

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.23-28
• /
• 2019

This paper presents an optimal performance of rear wheel steering vehicle for maneuverability. The maneuverability of vehicle is evaluated in terms of yaw rate, body slip angle and driver input. The maneuverability of vehicle can be improved by rear wheel steering system. To obtain optimal performance of rear wheel steering vehicle, the optimal control history is designed. The high dimensional trajectory optimization problem is solved by formulating a quadratic program considering rear wheel steer input. To evaluate handling performance 7 degree-of-freedom vehicle model with actuation sub-models is designed. A step steer test is conducted to evaluate rear wheel steering vehicle. A response time, a TB factor, overshoot, and yaw rate gain are investigated through objective criteria, assessment webs. The handling performance of vehicle is evaluated via computer simulations. It has been shown from simulation studies that optimal controlled rear wheel steering vehicle provides improved performance compared to others.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.180.4-180
• /
• 2001

This paper describes a vision-based line-tracking system for AGV and steering control scheme. For detect the guideline quickly and exactly, We use four line-points which complement and predict each other. This low-cost line-tracking system is efficiently using PC-based real-time vision processing, Steering control is studied through an steering controller with guide-line angle and line-point error. This method is tested via a typical AGV with a single camera in laboratory environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.571-576
• /
• 2001

Hydroforming, the new production technology, has been used to manufacture many parts of vehicle in the recent auto industry. When Hydroforming is applied, it is possible to make parts simplification and flexible alteration of section shape in many advantages such as weight reduction, number of parts reduction or performance improvement. This research into shape optimization which reduces number of parts and weight maintaining performance was achieved. In this paper, the COWL CROSS BAA and MT'g BAKT parts of A car STEERING support SYSTEM was introduced by using Hydroforming.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.282-291
• /
• 2000

In this paper, the dynamics of automated guideway transit vehicles with rubber tires are studied. Two different AGT models are considered: the bogie system and the steering system . It is found that the bogie system is stable at all possible operating speeds, whereas it is not true fur the steering system. To investigate the dynamic stability of steering systems, the critical speeds are investigated and the dynamics of the closed-loop steering control system are numerically simulated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.439-443
• /
• 2001

The steering wheel vibrations such as shimmy, brake judder and shake are affected by the vibration characters of steering and suspension. For the analysis of shimmy, nonuniformities of tire can be considered the major sources. This study investigates unbalances and uniformities of tire in which the lateral force variation is highly correlated with shimmy. The hardness of suspension bushes can be modified to change the dynamic behavior of suspension that is effective to reduce the sensitivity of shimmy.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.163-167
• /
• 2004

Reducing friction torque of the oil hydraulic vane pump used as the power source of power steering system should consider friction torque including viscous and mechanical friction torque according to the changes of rpm and pressure. This paper analyzes the forces acting on the vane to reduce the friction torque of the vane of the hydraulic vane pump used for Hydraulic Power Steering(HPS) system, and futhermore, the forces according to the shapes of cam profiles are analyzed.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.218-225
• /
• 2016

일반적으로 알려진 GPS 항재밍 기술로는 재밍 방향에 대한 감쇄효과를 얻는 널 스티어링 (null steering)과 위성방향으로의 추가 합성이득을 얻는 빔 스티어링 (beam steering) 방식이 있다. 이 신호처리 알고리즘을 소개하는 문헌에 의하면, 수학 공리에 따라 동시처리 가능한 재밍의 개수는 배열안테나 소자의 개수 N 에서 기준 안테나 1개를 제외한 N-1 개에 대해서만 유효하다는 표현을 하지만, 재머 배치나 비행체의 자세 그리고 둘 간의 상대적 배치 등 실질적인 운용 조건을 고려한 알고리즘 특성에 대한 분석은 알려져 있지 않다. 이에 본 논문에서는 4소자 및 7소자 표준 배열안테나가 적용된 항재밍 시스템을 모델링하여 비행체의 자세(수평, 수직)와 재머 배치, 그리고 안테나 소자 수를 고려한 두 항재밍 알고리즘(PM, LCMV)에 대한 성능 분석을 하였다. 결과적으로, 동일한 JSR 환경임에도 불구하고, 위성 신호와 재밍 신호 간 입사각이 상대적으로 큰 비행체의 수직 자세의 경우 수평 자세보다 약 10 dB 이상의 이득이 있음을 시뮬레이션을 통해 제시 하였다.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.143-148
• /
• 2013

본 논문에서는 무선 시스템에서 목표물 도래방향 추정에 대한 다중 빔에 대해서 연구한다. 빔 조향 방법은 고각 방향의 빔 조향 방식 또는 빔 형성 방식, 스택 빔 조향, 주파수 조향, 위상 조향 및 디지털 빔 형성 등으로 구분 된다. 제안된 알고리즘은 효과적인 빔 조향을 하기위해서 위상과 크기를 보정하는 안테나 가중치 오차 보정기법과 특이 행렬을 결합한 방법이다. 본 논문에서는 빔 조향 추정 알고리즘을 제안하여 디지털 빔 형성 레이더에 빔조향 방식을 적용하여 목표물을 추정하였다. 모의실험을 통해서 본 연구에서 제안된 알고리즘의 성능을 기존 알고리즘과 비교 분석하였다. 목표물 도래방향 추정에서 본 연구에서 제안한 알고리즘이 기존 알고리즘보다 도래방향 추정 능력이 향상된 것을 입증하였다.