• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.752-757
• /
• 2017

Analysis has been performed for the penetration of a long-rod into MMC/Ceramic layered armour system with several shot test and a series of simulations. Two types of MMC plate have been fabricated by a liquid pressing method; A356/45%vol.%SiCp with a uniform distribution of SiC particle and Al7075/45%vol.B4Cp with B4C particle. The mechanical properties were measured with the high-speed split Hopkins bar test, hardness test and compression test. The popular Simplified Johnson-Cook model was adopted to represent the material characteristics for FEM simulations. The performance of the MMC applied armour system has been made by comparing with the semi-infinite mild steel target using the depth of penetration(DOP). The results show that placing ceramic front layer provides a certain gain in protection, and that placing another ductile front layer provides a further gain. The application of MMC is found to be attractive.

• Environmental and Resource Economics Review
• /
• v.20 no.4
• /
• pp.827-858
• /
• 2011

In Korea, various environmentally harmful subsidies are granted in agriculture, fishery, energy, electricity, transportation, steel and shipbuilding industry. Examples include tax-exempt fuel for agriculture & fishery, VAT- exemption for briquette & anthracite, temporary subsidy for fuel, production stabilizing subsidy for coal mining, subsidy for briquette. Korea's yearly total subsidy in energy area is about 5,291 billion won, among them is 4,870 billion won. To reduce air pollutants and to mitigate climate change, Korea has to review the phase-out of environmentally harmful subsidies and the phase-in of environment-friendly subsidy. The reduction or removal of environmentally harmful subsidies will enhance economic efficiency and bring about environmental benefits. Economic efficiency means less use of inputs, which reduces environmental cost and improves social benefits. This paper applies the Shoven and Whalley's model to the Korean economy and analyzes the general equilibrium incidence effects of reforming environmentally harmful subsidies in the energy and electricity in Korea. We consider several counterfactual scenarios in which current environmentally harmful subsidies are reduced or abolished, compare them with the reference case in the economy, and evaluated the change in efficiency costs and distributional incidence of tax reforms related to subsidies.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.2
• /
• pp.300-305
• /
• 2011

The present study was investigated the neuroprotective effects of acupuncture at ST36 on learning and memory deficits after transient cerebral ischemia in a gerbil model. The animals were randomly divided into three groups (n=7 in each group): the sham operation group (SHAM), ischemia-induced and ST36 acupuncture group (ISC + ST36), and the ischemia-induced and Tail-acupuncture group (ISC + TAIL). For the acupuncture stimulation, stainless steel needles, 0.3 mm in diameter, were inserted bilaterally into the ST36 locus or the tail and stimulated for 1 min/day for 14 days. Using the Morris water maze test, the animals were tested on spatial learning and memory. In addition, the effects of acupuncture on memory storage and the choline acetyltransferase (ChAT) activity, in the hippocampal CA1 area, were investigated by ChAT immunohistochemistry. Transient cerebral ischemia produced impaired performance on the MWM test (DAY 5: p<0.01 and retention test: p<0.05) and severely decreased ChAT immunoreactivity in the CA1 hippocampal area compared to the SHAM group (p<0.05). However, improved learning and memory were observed (DAY 5: p<0.05 and retention test: p<0.01) as well as a significantly reduced loss of ChAT immunoactivity in the hippocampal CA1 region (p<0.001) after acupuncture stimulation at ST36 were observed. These results show that acupuncture at ST36 ameliorated the learning and memory deficits at least in part through the cholinergic system. The findings of this study provide potential data that acupuncture is useful for the treatment of some of the behavioral impairs of transient cerebral ischemia.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.68-75
• /
• 2021

This study performed simulating water absorption in various pre-cracked concretes. 2D-Finite Element Analysis (2D-FEA) model was developed based on experimental results on the amount of absorbed water in concrete with the exposure time. Results from the 2D-FEA showed that both crack width and crack depth strongly affect the amount of absorbed water in cracked concrete. In addition, water absorption rate is introduced and a predictive equation is suggested to estimate the rate in order to quantify the amount of absorbed water in cracked concrete. It was confirmed that water absorption in concrete having less than 150 mm crack depth was dominated as a main transport factor regardless of crack width. Therefore, considering that steel corrosion caused by chlorides dissolved in water mainly occurs in reinforced concrete structures, it is necessary that crack depth as well as crack width should be investigated in reinforced concrete structures at the time of field-inspection.

• Composites Research
• /
• v.32 no.5
• /
• pp.284-289
• /
• 2019

In the present paper, the dynamic force-moment equilibrium equations, driving power and energy equations are analyzed to formulate the equation for fuel economy(km/liter) equivalent to the driving distance (km) divided by the fuel volume (liter) of the vehicle, a selected model of gasoline powered KIA K3 (1.6v). In addition, the effects of the dynamic parameters such as speed of vehicle (V), vehicle total weight(M), rolling resistance ($C_r$) between tires and road surface, inclined angle of road (${\theta}$), as well as the aerodynamic parameters such as drag coefficient ($C_d$) of vehicle, air density(${\rho}$), cross-sectional area (A) of vehicle, wind speed ($V_w$) have been analyzed. And the possibility of alternative materials such as lightweight metal alloys, fiber reinforced plastic composite materials to replace the conventional steel and casting iron materials and to reduce the weight of the vehicle has been investigated by Ashby's material index method. Through studies, the following results were obtained. The most influencing parameters on the fuel economy at high speed zone (100 km/h) were V, the aerodynamic parameters such as $C_d$, A, ${\rho}$, and $C_r$ and M. While at low speed zone (60 km/h), they are, in magnitude order, dynamic parameters such as V, M, $C_r$ and aerodynamic ones such as $C_d$, A, and ${\rho}$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.845-856
• /
• 2020

This study proposes a bridge evaluation system for indivisible permit vehicles such as hydraulic cranes. The permit loads for the bridge evaluation are divided into three categories: routine permit loads, special permit 1 loads, and special permit 2 loads. Routine permit and special permit 1 vehicles are allowed to cross a bridge with normal traffic. For these two permits, the standard lane model in the Korean Highway Bridge Design Code was adopted to consider normal traffic in the same lane. Special permit 2 vehicles are assumed to cross a bridge without other traffic. Structural analyses of two prestressed-beam bridges and two steel box girder bridges were conducted for the proposed permit loads. The rating factors of the four bridges for all permit loads were calculated as sufficiently large values for the moment and shear force so that crossing the bridges can be permitted. A reliability assessment of the bridges was performed to identify the reliability levels for the permit vehicles. It was confirmed that the reliability level of the minimum required strength obtained by the load-resistance factors yields the target reliability index of the design code for the permit vehicles.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.27-35
• /
• 2024

Fuel gases such as methane and propane are used in explosion hazardous area of domestic plants and can form non-uniform mixtures with the influence of process conditions due to leakage. The fire-explosion risk assessment using literature data measured under uniform mixtures, damage prediction can be obtained the different results from actual explosion accidents by gas leaks. An explosion characteristics such as explosion pressure and flame velocity of non-uniform gas mixtures with concentration change similar to that of facility leak were examined. The experiments were conducted in a closed 0.82 m long stainless steel duct with observation recorded by color high speed camera and piezo pressure sensor. Also we proposed the quantification method of non-uniform mixtures from a regression analysis model on the change of concentration difference with time in explosion duct. For the non-uniform condition of this study, the area of flame surface enlarged with increasing the concentration non-uniform in the flame propagation of methane and was similar to the wrinkled flame structure existing in a turbulent flame. The time to peak pressure of methane decreased as the non-uniform increased and the explosion pressure increased with increasing the non-uniform. The ranges of K_G (Deflagration index) of methane with the concentration non-uniform were 1.30 to 1.58 [MPa·m/s] and the increase rate of K_G was 17.7% in methane with changing from uniform to non-uniform.

• Particle and aerosol research
• /
• v.19 no.4
• /
• pp.111-128
• /
• 2023

Chungcheongnam-do has various emission sources, including large-scale facilities such as power plants, steel and petrochemical industry complexes, which can lead to the severe PM pollution. Here, we measured concentrations of PM₁₀, PM_2.5, and its metallic elements at a suburban site in Taean, Chungcheongnam-do from September 2017 to June 2022. During the measurement period, the average concentrations of PM₁₀ and PM_2.5 were 58.6 ㎍/m³ (9.6~379.0 ㎍/m³) and 35.0 ㎍/m³ (6.1~132.2 ㎍/m³), respectively. The concentration of PM₁₀ and PM_2.5 showed typical seasonal variation, with higher concentration in winter and lower concentration in summer. When high concentrations of PM_2.5 occurred, particulary in winter, the fraction of Zn and Pb components considerably increased, indicating a significant contribution of Zn and Pb to high-PM_2.5 concentration. In addition, Zn and Pb exhibited the highest correlation coefficient among all other metallic elements of PM_2.5. A backward trajectory cluster analysis and CPF model were performed to examine the origin of PM_2.5. The high concentration of PM_2.5 was primarily influenced by emissions from industrial complexes located in the northeast and northwest areas.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.27-33
• /
• 2013

In order to provide basic data for the development of a controlled environment cultivation system and standardization of the structures, structural status and improvement methods were investigated for the fruit tree greenhouses of grape, pear, and peach. The greenhouses for citrus and grape cultivation are increasing while pear and persimmon greenhouses are gradually decreasing due to the advance of storage facilities. In the future, greenhouse cultivation will expand for the fruit trees which are more effective in cultivation under rain shelter and are low in storage capability. Fruit tree greenhouses were mostly complying with standards of farm supply type models except for a pear greenhouse and a large single-span peach greenhouse. It showed that there was no greenhouse specialized in each species of fruit tree. Frame members of the fruit tree greenhouses were mostly complying with standards of the farm supply type model or the disaster tolerance type model published by MIFAFF and RDA. In most cases, the concrete foundations were used. The pear greenhouse built with the column of larger cross section than the disaster tolerance type. The pear greenhouse had also a special type of foundation with the steel plate welded at the bottom of columns and buried in the ground. As the results of the structural safety analysis of the fruit tree greenhouses, the grape greenhouses in Gimcheon and Cheonan and the peach greenhouses in Namwon and Cheonan appeared to be vulnerable for snow load whereas the peach greenhouse in Namwon was not safe enough to withstand wind load. The peach greenhouse converted from a vegetable growing facility turned out to be unsafe for both snow and wind loads. Considering the shape, height and planting space of fruit tree, the appropriate size of greenhouses was suggested that the grape greenhouse be 7.0~8.0 m wide and 2.5~2.8 m high for eaves, while 6.0~7.0 m wide and 3.0~3.3 m of eaves height for the pear and peach greenhouses.